Warnings; Installing Antennas - Cisco 860 Series Hardware Installation Manual
Integrated services routers
Hide thumbs
Also See for 860 Series:
- Hardware installation manual (112 pages) ,
- Installing manual (60 pages) ,
- Quick reference manual (3 pages)
Table of Contents
Advertisement
Installing the Router
Warnings
This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect
Warning
the host to earth ground during normal use. Statement 242
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Read the wall-mounting instructions carefully before beginning installation. Failure to use the
Warning
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
Note
•
•
•
Do not cover or obstruct the router vents located on both sides of the router; otherwise, overheating could
Caution
occur and cause damage to the router.
Do not place anything on top of the router that weighs more than 10 pounds (4.5 kilograms), and do not
Caution
stack routers on a desktop. Excessive weight on top of the router could damage the chassis.
Do not install the router or power supplies next to a heat source of any kind, including heating vents.
Caution
The top surface of the router is hot since heat is dissipated through the top. Do not keep any object in
Caution
direct contact with the surface for a prolonged period.
Installing Antennas
The Cisco 890 series wireless routers have three reverse-polarity threaded Neill-Concelman (RP-TNC)
connectors on the back panel. The antennas that are shipped with the router are dual-band 2.4-GHz to
5-GHz omnidirectional dipole antennas.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
2-4
Do not stack anything on top of the router.
Do not cover or obstruct the router vents located on both sides and top of the routers; otherwise,
overheating could occur and cause damage to the router.
Place router in ventilated area to avoid local air heating.
Chapter 2
Installing the Router
OL-16215-10
Hide quick links:
Advertisement
Table of Contents
