hit counter script
Cisco 880 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 880 Series
  6. Hardware installation manual
Cisco 880 Series Hardware Installation Manual

Cisco 880 Series Hardware Installation Manual

Hide thumbs Also See for 880 Series:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual , Manual
Cisco 860 Series, Cisco 880 Series, and
Cisco 890 Series Integrated Services
Routers Hardware Installation Guide
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Text Part Number: OL-16215-12
Last Revised: January 23, 2014

Advertisement

Table of Contents
loading

Related Manuals for Cisco 880 Series

Summary of Contents for Cisco 880 Series

  • Page 1 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices.
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    1-20 C881WD 1-21 Cisco C881, C886, and C887 Series ISRs 1-23 Cisco C881 Router 1-24 Cisco C886VA Router 1-25 Cisco C886VAJ Router 1-26 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 4 Additional Items Connections Ethernet Devices Installing the Router Warnings Installing Antennas Installing on a Table Mounting on a Wall Installing in a Rack 2-11 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 5 3-39 Verifying Connections 3-40 Initial Configuration C H A P T E R Cisco Configuration Professional Express Cisco IOS CLI Setup Command Facility Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 6 Voice ISDN BRI Interface Pin Numbers and Functions A-10 SFP Port Connector Pinouts A-10 Cable Specifications A-11 Ethernet Cable Specifications A-11 Maximum Cable Length A-11 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 7: Preface

    This guide provides an overview and explains how to install, connect, and perform initial configuration for the wireless and nonwireless Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs). Some information may not apply to your particular router model.

  • Page 8: Organization

    Means the following information will help you solve a problem. The tip information might not be troubleshooting or even an action, but could be useful information. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 9 Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 10 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide VIII OL-16215-12...
  • Page 11 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 12 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 13 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 14 Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.

  • Page 15: Related Documentation

    Statement 1040 Related Documentation In addition to the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISR Hardware Installation Guide (this document), the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISR documentation set includes the following documents: •...

  • Page 16: Searching Cisco Documents

    Cisco technical documentation: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Subscribe to the What’s New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.

  • Page 17: Product Overview

    Some illustrations in this document show a wireless router. Both wireless and nonwireless models are Note available in the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs. Port and feature locations are similar for both wireless and nonwireless routers.

  • Page 18: General Description

    887VA series routers have the additional capability of DSL Multi-mode (VDSL/ADSL). The Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs have a desktop form factor with built-in wall-mount features. The Cisco 890 series ISRs also have optional rack-mount features. These ISRs are powered by an external power supply adapter.

  • Page 19: Cisco 860Vae Series Isrs

    Cisco 860VAE Series ISRs Figure 1-2 shows the back panel details of the Cisco 861 wireless (861W) ISR. Nonwireless routers do not have antennas on the back panel. However, the feature locations are similar for all Cisco 860 series routers. Figure 1-2...

  • Page 20: Ios Images

    Cisco 866VAE, Cisco 867VAE, Cisco 866VAE-K9, and Cisco 867VAE-K9 integrated services routers (ISRs). Figure 1-3 Front Panel of the Cisco 860VAE series ISR Cisco 860 Series LEDs Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 21 Ethernet LAN GE and FE interfaces (GE0 Reset button interface and FE0 through FE3 interfaces) USB port Kensington security slot Serial port—console or auxiliary Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 22: Cisco 860Vae-W-A-K9, Cisco 860Vae-W-E-K9, And Cisco 860Vae-Poe-W-A-K9 Isrs

    Support for 8 MB Serial Peripheral Interface Bus (SPI) flash memory for boot and 128 MB NAND • flash memory for storing IOS Reset/Recovery switch • Silent convection cooling—no fan • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 23: External Interfaces

    Cisco IOS software boot from USB. • Use only the following Cisco USB 2.0 flash tokens: MEMUSB-128FT (128 MB) • MEMUSB-256FT (256 MB) • MEMUSB-1024FT (1 GB) • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 24: Led Indicators

    GE Ports GE LAN 0 Green Off—No link. Faster flashing indicates heavier traffic. GE LAN 1 Green Off—No link. Faster flashing indicates heavier traffic. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 25 The front panel includes several LED indicators. Figure 1-7 shows the location of the LED indicators. Figure 1-7 Front Panel LED Indicators Cisco 860 Series WLAN LED indicators Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 26 Indicates WLAN activity (traffic in either direction). — Device is powered off. WLAN is disabled. Power Green Solid On—The device is powered on. — Device is powered off. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-10 OL-16215-12...

  • Page 27: Cisco 880 Series Isrs

    Figure 1-11 show the features available on Cisco 880 series data routers. Some of the features shown may not be available on your router. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide...
  • Page 28 WAN interface that is supported on your router. Figure 1-8 shows the front panel details of the Cisco 880 wireless data router. The USB port and the 3G card slot are located on the front panel.
  • Page 29 For the Cisco 887VA, the primary WAN port is designed for an RJ-11 connector only. Damage Caution to the primary WAN port may occur if a non-RJ-11 connector is inserted. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-13 OL-16215-12...

  • Page 30: Cisco 880 Series Voice And Data Routers

    10 Kensington security slot 1. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install it to enable the PoE function.

  • Page 31: Cisco 881 Srst And Cisco 888 Srst

    Cisco 881 SRST and Cisco 888 SRST wireless voice router. Figure 1-12 Front Panel of the Cisco 881 SRST and Cisco 888 SRST Wireless Voice Router LEDs USB port Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-15 OL-16215-12...
  • Page 32 6. Ports 0 and 1 provide PoE with the optional PoE module installed 7. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field Replaceable Unit (FRU) to enable the PoE function.
  • Page 33 2. Ports 0 and 1 provide PoE with the optional PoE module installed. 3. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field Replaceable Unit (FRU) to enable the PoE function.

  • Page 34: Cisco 881-V, Cisco 887Va-V, And Cisco 887Va-V-W

    The Cisco 881-V and Cisco 887VA-V voice and data series gives you the flexibility to use either FXS or BRI voice ports. However, the number of concurrent calls that can be supported by the router is limited by the codec complexity setting on the router.
  • Page 35 Figure 1-17 shows the back panel for the Cisco 881-V router. Figure 1-17 Back Panel of the Cisco 881-V Router C881 VOI CE Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-19 OL-16215-12...

  • Page 36: Cisco 880 Series With Embedded Wlan Antennas

    Figure 1-18 Front Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs CD DATA LINK 2.4GHz 5GHz xDSL WLAN Cisco 800 Series FE LAN Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-20 OL-16215-12...

  • Page 37: C881Wd

    LEDs only. All the ports are in the back panel. Figure 1-20 Front Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs LINK 2.4GHz 5GHz WLAN Cisco 800 Series FE LAN Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-21 OL-16215-12...
  • Page 38 WLAN antennas. For information on system power supply requirements when PoE is enabled, see the “Power over Ethernet Module” section on page 1-55. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-22 OL-16215-12...

  • Page 39: Cisco C881, C886, And C887 Series Isrs

    Cisco C881, C886, and C887 Series ISRs offer broadband speed and simplified management to small businesses, small enterprise branches, and teleworkers. The Cisco C881, C886, and C887 Series ISR models have a lead-free, fanless chassis and are updated versions of the previous Cisco 881, 886, and 887 series (excluding 3G and wireless models).

  • Page 40: Cisco C881 Router

    FE LAN LEDs For detailed description about the LEDs on the Cisco C880 Series Routers, see the “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-24 OL-16215-12...

  • Page 41: Cisco C886Va Router

    LINK B1 LEDs For detailed description about the LEDs on the Cisco C880 Series Routers, see the “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-25 OL-16215-12...

  • Page 42: Cisco C886Vaj Router

    LINK LINK B1 LEDs For detailed description about LEDs on the Cisco 880 Series Router, see the “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-26 OL-16215-12...

  • Page 43: Cisco C887Va Router

    Series FE LAN LEDs For detailed description about the LEDs on Cisco C880 Series Router, see the “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-27 OL-16215-12...

  • Page 44: Cisco C887Vam Router

    Cisco 800 Series FE LAN LEDs For detailed description about LEDs on Cisco C880 series router, see “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-28 OL-16215-12...
  • Page 45 Earth ground connection Serial port—Console or auxiliary Kensington security slot On/Off switch For information on installing the Cisco C880 Series Routers, see: Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-29 OL-16215-12...

  • Page 46: Cisco 890 Series Isrs

    DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB • system memory in Cisco 891 and 892 series ISRs, and a total of 1 GB system memory in Cisco 892F series ISRs Three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel for •...
  • Page 47 PoE power connector for optional PoE RP-TNC connectors (wireless models only) module Backup—Data BRI or V.92 port Reset button Primary WAN port—FE and GE Power connector Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-31 OL-16215-12...

  • Page 48: Cisco 892Fsp, Cisco 896Va, Cisco 897Va, And Cisco 898Ea

    2. The Data BRI port is available only on the Cisco 892 router models. 3. The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the Ethernet switch.
  • Page 49 Cisco 896VA, 897VA, and 898EA models only. No PoE support on Cisco 892FSP. The Cisco 892FSP does not support AIM2-CUE-K9 and AIM2-APPRE-104-K9 because it does not have Note an SFC socket. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-33 OL-16215-12...
  • Page 50 10 Kensington security slot Figure 1-36 shows the front panel of the Cisco 892FSP router. Figure 1-36 Front Panel of the Cisco 892FSP Router LEDs Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-34 OL-16215-12...
  • Page 51 Cisco 896VA and the Cisco 897VA router. Figure 1-38 Front Panel of the Cisco 896VA and Cisco 897VA Router LEDs Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-35 OL-16215-12...
  • Page 52 GE WAN RESET 54VDC 1.2A 12VDC 2.5A 9 10 GE WAN interface On/Off switch SFP port Reset button USB port Earth ground connection Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-36 OL-16215-12...
  • Page 53 1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with the factory order, you must order and install it to enable the PoE function. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-37...
  • Page 54 1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with the factory order, you must order and install it to enable the PoE function. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-38...
  • Page 55 Figure 1-46 shows the front panel of the Cisco 898EA router. Figure 1-46 Front Panel of the Cisco 898EA Router LEDs Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-39 OL-16215-12...

  • Page 56: Cisco C891 Series Isrs

    Embedded Wireless AP Dual 802.11b/g/n and 802.11a/n radios for C891FW For detailed hardware specifications, see the Cisco C890 Series hardware data sheet at: http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-40 OL-16215-12...

  • Page 57: Cisco C891F Router

    V.92 V.92 LEDs For detailed description about the LEDs on the Cisco C890 Series Routers, see the “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-41 OL-16215-12...

  • Page 58: Cisco C891Fw Router

    Cisco 800 Series ISDN V.92 LEDs For detailed description about the LEDs on Cisco C890 Series Router, see “LEDs” section on page 1-47. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-42 OL-16215-12...

  • Page 59: Hardware Features

    • Reset Button • LEDs Memory • USB Port • • Power over Ethernet Module • 3G Cellular Data WAN Connectivity • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-43 OL-16215-12...

  • Page 60: Kensington Lock

    Cisco 860VAE Routers—Custom Configuration File On Cisco 860VAE routers, the reset button can be used to load a custom configuration file without having to use the CLI. The configuration file can be located on an external USB flash drive or on the router's compact flash.

  • Page 61: Custom Configuration File For Cisco 892Fsp, 896Va, 897Va, And Cisco 898Ea

    The priority for loading a configuration file is as follows: nvram: *.cfg Router flash: *.cfg If the router does not find a valid custom configuration file, the system aborts the process. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-45 OL-16215-12...
  • Page 62 Press and hold the Reset button until the system status LED begins to flash. Typically, this occurs within Step 2 5 seconds. The router reloads itself after the startup configuration has been replaced with the new customer configuration. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-46 OL-16215-12...

  • Page 63: Leds

    Green On—Port is connected. — — All models Link Status Blinking—Data is either being received or being transmitted. Off—Port is not connected. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-47 OL-16215-12...
  • Page 64 Chapter 1 Product Overview Hardware Features Table 1-10 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Color Description 860 Series 880 Series 890 Series WLAN Green On—Radio is connected, SSID is configured, and client...
  • Page 65 Chapter 1 Product Overview Hardware Features Table 1-10 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Color Description 860 Series 880 Series 890 Series xDSL EFM Green Blink—The router is operating in EFM mode.
  • Page 66 Chapter 1 Product Overview Hardware Features Table 1-10 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Color Description 860 Series 880 Series 890 Series Not present. — — 892F models Green Present and enabled.
  • Page 67 1. xDSL = General term referring to various forms of DSL, including ADSL (asymmetric digital subscriber line) and VDSL (very-high-data-rate digital subscriber line). Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-51...

  • Page 68: Shared Leds On The Cisco 881-V And Cisco 887Va-V Voice And Data Routers

    Shared LEDs on the Cisco 881-V and Cisco 887VA-V Voice and Data Routers On the Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W routers, the BRI1, BRI2 and the FXS ports share LED indicators. The following ports share an LED indicator: •...

  • Page 69: Memory

    Close-up of the BRI and FXS LED Indicators Memory The Cisco 860 series, 880 series, and 890 series routers contain flash memory and main memory. Flash Memory The Cisco 860 series, 880 series, and 890 series ISRs use non-upgradable flash memory storage. The onboard flash memory contains the Cisco IOS software image, the boot flash contains the ROMMON boot code, and a separate non-volatile flash contains the cookie configuration.

  • Page 70: Usb Port

    One USB 2.0-compliant port located on the back panel. Cisco897VA, Cisco 898EA 1. Except for Cisco 892FSP, Cisco 896VA, Cisco 897VA, and Cisco 898EA. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-54 OL-16215-12...

  • Page 71: Fan

    The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0, 1, 2, and 3. The PoE module is an option available only for the Cisco 880 series and 890 series ISRs and requires a 48 V external power adapter.

  • Page 72: 3G Cellular Data Wan Connectivity

    Some Cisco 880G models come with a 34-mm express card slot ready for use with a commercial 3G card radio. The 3G express card slot is located on the front panel. For a list of supported 3G cards, see the Cisco 880 Series Integrated Services Routers Data Sheet.

  • Page 73: Wireless Lan Connectivity

    To configure the wireless device, use the Cisco IOS command-line interface (CLI). Table 1-16 describes the radios and antennas for the Cisco 860 series, 880 series, and 890 series routers. Cisco 860VAE ISRs do not support wireless LAN connectivity. Note The 5-GHz radio operates in the Unlicensed National Information Infrastructure (UNII) 1, 2, 3, 5-GHz frequency bands.

  • Page 74: Supported Cisco Radio Antennas

    Chapter 1 Product Overview Hardware Features Supported Cisco Radio Antennas The Cisco 891, Cisco 892, and Cisco 892F come with three removable dipole antennas that can be replaced using the Cisco approved antenna extenders listed in Table 1-17. Cisco supports only the antennas listed in Table 1-17 with the Cisco 890 series dual-band radio module.

  • Page 75: Feature Summary

    892F modem, or router. The router is capable of bridging and multiprotocol routing between the LAN and WAN ports. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-59 OL-16215-12...
  • Page 76 Chapter 1 Product Overview Hardware Features Table 1-18 Hardware Features Available in Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Feature Description 860 Series 880 Series 890 Series GE WAN port 10/100/1000 GE WAN Port. 866VAE, —...
  • Page 77 Chapter 1 Product Overview Hardware Features Table 1-18 Hardware Features Available in Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Feature Description 860 Series 880 Series 890 Series Dying gasp Detects when the router is losing power, and sends a...
  • Page 78 18. FXO = Foreign Exchange Office. 19. FXS = Foreign Exchange Station. 20. DID = Direct Inward Dialing. 21. SFP = small-form-factor pluggable. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-62 OL-16215-12...

  • Page 79: Chapter 2 Installing The Router

    U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052 No user-serviceable parts inside. Do not open. Statement 1073 Warning Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 80: Equipment, Tools, And Connections

    AC power supply cable with cable retention clip Cisco Configuration Professional (Cisco CP) CD 1. By default, no cables are shipped with Cisco 860VAE models unless requested through the dynamic configuration tool. 2. DSL = digital subscriber line. 3. Shipped with Cisco 867 models only.

  • Page 81: Connections

    Installing the Router This section describes how to install the Cisco 860 series, 880 series, and 890 series ISRs. These routers can either be installed on a table top or other flat horizontal surface or be mounted on a wall. The Cisco 890 series ISRs may be mounted in a rack.

  • Page 82: Warnings

    The Cisco 890 series wireless routers have three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel. The antennas that are shipped with the router are dual-band 2.4-GHz to 5-GHz omnidirectional dipole antennas. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 83 All wireless LAN products in the 5.2/5.3GHz band cannot be used outdoors. Use the product only Warning indoors. Statement 372 Before you install the Cisco 890 series wireless router on a table, wall, or rack, connect the antennas to Note the back panel. It is difficult to attach the antennas after the router is installed.
  • Page 84 Chapter 2 Installing the Router Installing the Router Figure 2-2 Antennas Oriented Vertically Up Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 85: Installing On A Table

    Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the “Installing the Router Ground Connection” section on page 2-13. Do not place anything on top of the router. Note Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 86: Mounting On A Wall

    Installing the Router Mounting on a Wall The Cisco 860 series, 880 series, and 890 series ISRs have mounting holes on the bottom of the chassis for mounting the unit on a wall or other vertical surface. The mounting holes are bidirectional. You can hang the router with the front bezel facing upward or downward.
  • Page 87 Hang the router on the screw without forcibly pushing towards the wall side. The screw head may Step 3 damage the protection wall inside. Place the power adapter on a nearby horizontal surface. See Figure 2-5. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 88 Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the Step 4 “Installing the Router Ground Connection” section on page 2-13. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-10 OL-16215-12...

  • Page 89: Installing In A Rack

    Installing the Router Installing the Router Installing in a Rack The Cisco 890 series ISRs can be mounted in a rack. To install a Cisco 890 series ISR in a rack, follow these steps: Remove the screws, as shown in Figure 2-6.

  • Page 90: Installing The Router Ground Connection

    Statement 1006 Using two screws for each side (supplied with the rack), attach the Cisco 890 series ISR with rack-mount Step 3 brackets to a 19-inch rack. Start with the lower pair of screws first, resting the brackets on the lower screws while you insert the upper pair of screws.

  • Page 91: Installing The Router Ground Connection

    After you install and properly ground the router, you can connect the power wiring, the WAN and LAN cables, and the cables for administrative access as required for your installation. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-13...

  • Page 92: Installing The Fips Cover

    Perform the following steps to install the FIPS cover in the router: Remove the four mounting screws of the top cover. Step 1 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-14 OL-16215-12...
  • Page 93 Rotate and bring into the close position to hinge to the correct hexagon. Step 3 Place the adapter plate before closing by aligning the mounting holes. Step 4 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-15 OL-16215-12...
  • Page 94 Install the right-side FIPS cover the same way as the left-side FIPS cover. Step 6 View after both covers are installed. Step 7 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-16 OL-16215-12...
  • Page 95 If the FIPS covers are installed with the rack mount brackets, the adapter plates are not required in the Step 8 installation. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-17 OL-16215-12...
  • Page 96 Chapter 2 Installing the Router Installing the Router Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-18 OL-16215-12...

  • Page 97: Connecting The Router

    C H A P T E R Connecting the Router This chapter describes how to connect Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs) to Ethernet devices, Power over Ethernet (PoE), and a network. The...

  • Page 98: Safety Warnings

    Statement 1026 Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...
  • Page 99 No user-serviceable parts inside. Do not open. Statement 1073 Warning Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 100: Preparing To Connect The Router

    “Technical Specifications” section on page A-1 for cabling specifications. If this appendix does not provide specifications for a particular cable, we strongly recommend ordering the cable from Cisco. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 101: Connecting A Pc, Server, Or Workstation

    Step 3 Use the Cisco Configuration Express to configure the Internet connection settings. See Note Cisco Configuration Professional Quick Start Guide for more information. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 102: Connecting A Phone

    Figure 3-2 Connecting a Phone PQRS WXYZ OPER Yellow Ethernet cable RJ-45 port on a phone Ethernet switch port 1 on the router Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 103: Connecting An External Ethernet Switch

    Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet Step 2 connections. Turn on the Ethernet switch. Step 3 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 104: Connecting The V.92 Modem Port

    Connect one end of the straight-through R-J11 cable to the V.92 port. Step 1 Connect the other end of the straight through R-J11 cable to an RJ-11 telephone wall outlet. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 105: Connecting A Terminal Or Pc To The Console Port

    Some laptops and PCs do not come with DB-9 serial port connectors and may require a Note USB-to-serial port adapter. To communicate with the router, start a terminal emulator application. Step 3 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 106: Terminal Emulator Settings

    Connecting a Modem to the Aux Port Aux port (RJ-45) DB-9 to DB-25 modem adapter (if required) Light blue console cable Modem Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-10 OL-16215-12...

  • Page 107: Connecting The 3G Card

    Global System for Mobile Communications (GSM) customers need to insert a SIM card, Note provided by their network carrier, into the 3G card. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-11 OL-16215-12...
  • Page 108 Figure 3-8. Step 2 Figure 3-8 Opening the Anti-theft Locking Bracket Front View Back View Pins on the locking bracket for alignment Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-12 OL-16215-12...
  • Page 109 Figure 3-9 Installing the Locking Bracket 3G card Notch on the 3G card Locking bracket Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-13 OL-16215-12...
  • Page 110 To connect the antenna to the 3G card, insert the antenna connector into the antenna connector receptacle Step 6 on the 3G card. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-14 OL-16215-12...
  • Page 111 1. The antenna connector receptacle is located on either the left, right or front of the card for different SKUs. Please locate the receptacle of your card before plugging in the cable. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-15...
  • Page 112 PCEX-3G-CDMA-V, PCEX-3G-CDMA-B, CISCO881G-A-K9, CISCO881G-S-K9, CISCO881G-V-K9 Clean the flat surface to which you will affix the antenna. Step 7 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-16 OL-16215-12...

  • Page 113: Installing The 3G Adapter For Extended Cable/Antenna

    Figure 3-14 Locating the Phillips Screw Phillips screw on the left side of router Air vent holes to be aligned with adapter Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-17 OL-16215-12...
  • Page 114 Align and insert the hooks of the adapter into the air vent holes on the left side router body as shown in Figure 3-16. Figure 3-16 Inserting the Hooks Hooks aligned and inserted into the router. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-18 OL-16215-12...
  • Page 115 Step 1 and use the screw to attach the adapter to the router as shown in Figure 3-17. Figure 3-17 Attaching the Adapter Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-19 OL-16215-12...
  • Page 116 Table 3-2 lists the loss information for the ultra-low-loss (ULL) LMR 400 cables available with the adpater for the 3G fixed platforms. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-20 OL-16215-12...

  • Page 117: Connecting A Data Bri Port

    Although the following procedure shows a Cisco 888W data router, this procedure applies to all Cisco 880 series router with a Data BRI port. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-21...
  • Page 118 Connect the second unshielded Category 5 cable from the telecommunication service port on the splitter Step 4 to the wall jack to allow a link to the network service provider. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-22 OL-16215-12...

  • Page 119: Connecting An Fe Line To An Fe Wan Port

    Modem connected to the Internet CAT 5 cable Connect the other end of cable to an available port on the modem. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-23 OL-16215-12...

  • Page 120: Connecting A Ge Line To An Ge Wan Port

    Modem connected to the Internet CAT 5 cable Connect the other end of cable to an available port on the modem. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-24 OL-16215-12...

  • Page 121: Connecting An Xdsl Line

    There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-25 OL-16215-12...
  • Page 122 G.SHDSL port, VDSL2oPOTs port, or DSL wall jack ADSL2+ port Connect the other end of the cable to the DSL wall jack. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-26 OL-16215-12...

  • Page 123: Connecting Power Over Ethernet

    48-VDC Power over Ethernet (PoE) power adapter to your router. The PoE adapter provides power to ports 0 and 1 of the 4-port 10/100 FE switch on the Cisco 880 series routers and ports 0,1, 2, and 3 of the 8-port 10/100 FE switch on the Cisco 890 series routers.

  • Page 124: Connecting The Ac Adapter

    Power adapter—48 VDC Power adapter—12 VDC The Cisco 880 series ISRs with embedded WLAN antennas require a single external power supply: a 30-W power supply for non-POE-enabled routers or a 60-W power supply for POE-enabled routers. For the back panels of some of these routers, see...
  • Page 125 Note assignment of the Cisco 892FSP Power Adapter Connector. To connect your Cisco 860 series, Cisco 880 series, or the Cisco 890FSP ISR to an AC power outlet, follow these steps: Connect the router to an AC power outlet as shown in Figure 3-25.To connect the Cisco 892FSP router,...
  • Page 126 Pin 3 Pin 2 Pin 1 Pin 1 Pin 3 Ground +12 V Pin 2 Pin 4 1. NC = No Connection. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-30 OL-16215-12...
  • Page 127 Figure 3-28 Securing the Power Cord Power lock clip DC plug Power cord Lock holes on either side of the power connector Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-31 OL-16215-12...

  • Page 128: Connecting An Fxs Line

    ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Statement 1026 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-32...
  • Page 129 RJ-11 port RJ-11 cable Step 2 Connect the other end of the cable to the RJ-11 port on the fax machine or telephone. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-33 OL-16215-12...

  • Page 130: Connecting An Fxo Line

    Connecting an FXO Line FXO port Telephone outlet RJ-11 cable Connect the other end of the RJ-11 cable to a telephone wall outlet. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-34 OL-16215-12...

  • Page 131: Connecting A Voice Isdn Bri Line

    Step 1 When the interface is configured as NT and is connecting to a TE device, use a crossover cable. Note Table A-16. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-35 OL-16215-12...
  • Page 132 Voice BRI port Telephone outlet RJ-45 cable Connect the other end of the cable to the RJ-45 telephone outlet or other device. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-36 OL-16215-12...

  • Page 133: Connecting A Small Form-Factor Pluggable Module

    Statement 1056 Use of controls, adjustments, or performing procedures other than those specified may result in Warning hazardous radiation exposure. Statement 1057 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-37 OL-16215-12...

  • Page 134: Installing An Sfp Module

    SFP model or technology type. For information on the SFP technology type and model, see the label on the side of the SFP. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-38...

  • Page 135: Online Insertion And Removal

    For a 1000 base SFP, the speed is set to 1000 and duplex is set to full. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide...

  • Page 136: Verifying Connections

    To PPP clients Green when either a PPPoE or PPPoA client is running. To VPN tunnel Green when a crypto session is running. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-40 OL-16215-12...
  • Page 137 To LAN GE/FE line Blinking when there is LAN activity (traffic in either (860VAE models direction). only) Off when the link is down. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-41 OL-16215-12...
  • Page 138 12. VPN = Virtual Private Network. 13. SSID = service set identifier. 14. PoE = Power over Ethernet. 15. SFP = small-form-factor pluggable. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-42 OL-16215-12...

  • Page 139: Initial Configuration

    Cisco Configuration Professional Express After you connect the cables and power up the router, we recommend that you use the Cisco CP Express web-based application to configure the initial router settings. For instructions on how to use Cisco CP Express to configure the router see Cisco CP Express User’s...

  • Page 140: Cisco Configuration Professional Express

    To continue using the Cisco IOS CLI for initial configuration, see the applicable configuration procedures in Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 141: Setup Command Facility

    Cisco IOS Configuration Fundamentals Command Reference, Release 12.2T. To proceed using the setup command facility, enter yes. Step 3 Continue with configuration dialog? [yes/no]: yes Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 142: Setup Command Facility

    IP address for this interface: 172.1.2.3 Subnet mask for this interface [255.255.0.0] : 255.255.0.0 Class B network is 172.1.0.0, 26 subnet bits; mask is /16 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 143: Verifying The Initial Configuration

    “Verifying the Initial Configuration” section on page 4-5 Step 13 verification procedures. After the initial configuration file is created, you can use the Cisco IOS CLI to perform additional configuration. Verifying the Initial Configuration To verify that the new interfaces are operating correctly, perform the following tests: To verify that the interfaces and line protocol are in the correct state—up or down—enter the show...

  • Page 144: Initial Configuration Of The Wireless Access Point

    For information on how to do basic wireless configuration on your router see the “Basic Wireless Device” chapter of the Cisco 860 Series, Cisco 880, and Cisco 890 Series Integrated Services Routers Software Configuration Guide. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 145: Technical Specifications

    A P P E N D I X Technical Specifications This appendix provides router, port, and cabling specifications for the Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs). It contains the following sections: Router Specifications, page A-2 •...

  • Page 146: Router Specifications

    Inline Power-over-Ethernet Adapter Input voltage 85 to 264 VAC Input frequency 47 to 63 Hz Power output 80 W, maximum Output voltage –48 VDC Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 147: Appendix A Technical Specification

    AC Adapter for Cisco 867VAE AC Adapter PWR-30W-AC Environmental Operating Ranges Nonoperating temperature –40 to 85°C Nonoperating humidity 10% to 95%, non condensing Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 148: Cisco 860Vae-W-A-K9, Cisco 860Vae-W-E-K9, And Cisco 860Vae-Poe-W-A-K9 Series

    Input: 100–240 VAC, Frequency range 50–60 Hz Output: 12 VDC, 5 A, 60 W Inline Power-over-Ethernet (PoE): C867VAE-POE-W-A-K9 Model Only IEEE 802.3af compliant Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 149: Power Supply

    Europe SKU(-W-E): Channels 1–13 Power Supply Table A-4 lists the maximum input values for the power supply used with the Cisco 860, 880, 890 series ISRs. Table A-4 Maximum Input Values for the power supply used with Cisco 860, 880, 890 series ISRs...

  • Page 150: Fe And Ge Port Pinouts

    Tx A+ Tx A- Rx B+ Tx C+ Tx C- Rx B- Rx D+ Rx D- 1. TX = Transmit 2. RX = Receive Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 151: Console And Auxiliary Port Connector Pinouts

    VDSL2 Port Connector Pinouts Table A-10 lists the VDSL2 connector pinouts. Table A-10 VDSL2 Connector Pinouts (RJ-11-to-RJ-45) RJ-11 Pin Function Unused Unused RING Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 152: Adsl2+ Port Connector Pinouts

    Table A-13 lists the pinouts for the symmetrical high-speed DSL (G.SHDSL) WAN port for two-pair products, including the following router model(s): C888 • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 153: Data Bri Port Connector Pinouts

    Data BRI Port Connector Pinouts Table A-15 lists the pinouts for the Data BRI port. Table A-15 Data BRI Port Pinouts Function Unused Unused Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16215-12...

  • Page 154: Voice Isdn Bri Interface Pin Numbers And Functions

    Module definition 0 Rate Select Loss of signal Receiver ground Receiver ground Receiver ground Inverted received data out Received data out Receiver ground Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide A-10 OL-16215-12...

  • Page 155: Cable Specifications

    The maximum length for the Ethernet cables that connect equipment to the router is 328 feet (100 meters). This length is also the maximum distance between the router and the equipment connected to it. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide A-11 OL-16215-12...
  • Page 156 Appendix A Technical Specifications Cable Specifications Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide A-12 OL-16215-12...

This manual is also suitable for:

890860

Table of Contents