hit counter script
Cisco 890 Series Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 890 Series
  6. Installation manual

Cisco 890 Series Installation Manual

Hide thumbs Also See for 890 Series:
Table of Contents

Advertisement

Quick Links

See also: Manual
Cisco 860, 880, 890 Series
Caution
The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN port may
occur if a non-RJ-45 connector is inserted.
Note
The DSL line must be provisioned by your service provider and correctly configured so that the LED
shows the carrier detect (CD) status. On Cisco 860VAE routers, check the DSL Link LED.

Connecting Power over Ethernet

This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source
Warning
or an IEC60950 compliant limited power source. Statement 353
Figure 3-30
The PoE adapter provides power to ports 0 and 1 of the 4-port 10/100 FE switch on the Cisco 880 series
routers and ports 0,1, 2, and 3 of the 8-port 10/100 FE switch on the Cisco 890 series routers.
The router must also be connected to an AC power outlet through a 12-VDC adapter. To connect the
Note
router to an AC outlet, see
Be sure that the internal PoE is enabled for this connection procedure to work.
Note
Cisco Integrated Services Router Hardware Installation Guide
3-34
shows how to connect the 48-VDC Power over Ethernet (PoE) power adapter to your router.
the"Connecting the AC Adapter" section on page
Chapter 3
Connecting the Router
3-5.
OL-23125-02

Advertisement

Table of Contents
loading

Related Manuals for Cisco 890 Series

Summary of Contents for Cisco 890 Series

  • Page 1: Connecting Power Over Ethernet

    48-VDC Power over Ethernet (PoE) power adapter to your router. The PoE adapter provides power to ports 0 and 1 of the 4-port 10/100 FE switch on the Cisco 880 series routers and ports 0,1, 2, and 3 of the 8-port 10/100 FE switch on the Cisco 890 series routers.

  • Page 2: Connecting The Ac Adapter

    Power adapter—48 VDC Power adapter—12 VDC The Cisco 880 series ISRs with embedded WLAN antennas require a single external power supply: a 30-W power supply for non-POE-enabled routers or a 60-W power supply for POE-enabled routers. For the back panels of some of these routers, see...
  • Page 3 Connecting the Router Cisco 860, 880, 890 Series To connect your Cisco 860 series, Cisco 880 series, or the Cisco 890FSP ISR to an AC power outlet, follow these steps: Connect the router to an AC power outlet as shown in Figure 3-31.
  • Page 4 12VD C 2. 5A 12-VDC plug Power adapter—12 VDC Power Adapter Cord AC Plug Figure 3-33 Cisco 892FSP , 896VA, 897VA, and 898EA Power Adapter Connector Pin Assignment Pin 4 Pin 3 Pin 2 Pin 1 Pin 1 Ground Pin 3...
  • Page 5 DC plug, and secure the retaining clip into the router chassis. See Figure 3-34. Figure 3-34 Securing the Power Cord Power lock clip DC plug Power cord Lock holes on either side of the power connector Cisco Integrated Services Router Hardware Installation Guide 3-38 OL-23125-02...

  • Page 6: Connecting An Fxs Line

    Statement 1026 For connections outside the building where the equipment is installed, the following ports must be Warning connected through an approved network termination unit with integral circuit protection: FXS. Statement 1044 Cisco Integrated Services Router Hardware Installation Guide 3-39 OL-23125-02...

  • Page 7: Connecting An Fxo Line

    Connect the other end of the cable to the RJ-11 port on the fax machine or telephone. Step 2 Connecting an FXO Line Use a straight-through RJ-11 cable to connect the FXO voice port to the PSTN or PBX through a telephone wall outlet. Cisco Integrated Services Router Hardware Installation Guide 3-40 OL-23125-02...
  • Page 8 If you have specified the use of a private line automatic ringdown (PLAR) off-premises extension (OPX) Note connection mode for an FXO voice port (with loop resistance less than 8000 Ohm), you must ensure that the soft-offhook option is enabled on the port. Cisco Integrated Services Router Hardware Installation Guide 3-41 OL-23125-02...

  • Page 9: Connecting A Voice Isdn Bri Line

    Connect one end of a straight-through RJ-45–to–RJ-45 cable to the Voice BRI port. Note When the interface is configured as NT and is connecting to a TE device, use a crossover cable. Table A-27. Cisco Integrated Services Router Hardware Installation Guide 3-42 OL-23125-02...
  • Page 10 Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Warning Do not stare into the laser beam. Statement 1010 Invisible laser radiation present. Statement 1016 Warning Cisco Integrated Services Router Hardware Installation Guide 3-43 OL-23125-02...
  • Page 11 Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Sliding latch Bale-clasp latch Swing and slide latch Plastic collar latch Cisco Integrated Services Router Hardware Installation Guide 3-44 OL-23125-02...

  • Page 12: Verifying Connections

    Green when service is established. Green when service is established. To PPP clients Green when either a PPPoE or PPPoA client is running. To VPN tunnel Green when a crypto session is running. Cisco Integrated Services Router Hardware Installation Guide 3-45 OL-23125-02...
  • Page 13 Blinking when there is DSL WAN activity (traffic in either direction). Faster blinking when there is heavier traffic. Off when the device is powered off or the DSL WAN interface is down. Cisco Integrated Services Router Hardware Installation Guide 3-46 OL-23125-02...
  • Page 14 9. PPP = Point-to-Point Protocol. 10. PPPoE = PPP over Ethernet. 11. PPPoA = PPP over ATM. 12. VPN = Virtual Private Network. 13. SSID = service set identifier. 14. PoE = Power over Ethernet. Cisco Integrated Services Router Hardware Installation Guide 3-47 OL-23125-02...
  • Page 15 Chapter 3 Connecting the Router Cisco 860, 880, 890 Series Cisco Integrated Services Router Hardware Installation Guide 3-48 OL-23125-02...

  • Page 16: Initial Configuration

    • Cisco IOS CLI To configure the initial router settings by using the Cisco IOS CLI, you must set up a console connection. To configure the initial router settings using the Cisco IOS CLI, refer to the Cisco IOS CLI, page 4-2.
  • Page 17 Guide. Cisco IOS CLI To configure the initial router settings by using the Cisco IOS CLI, you must set up a console connection. For instructions on how to set up a console connection, see the “Connecting a Terminal or PC to the Console Port”...
  • Page 18 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Please change these publicly known initial credentials using Cisco CP Express or the Cisco IOS CLI. Here are the Cisco IOS commands. username <myuser> privilege 15 secret 0 <mypassword> no username username1 Replace <myuser>...

  • Page 19: Setup Command Facility

    Basic management setup configures only enough connectivity for management of the system, extended setup will ask you to configure each interface on the system Would you like to enter basic management setup? [yes/no]: yes Cisco Integrated Services Router Hardware Installation Guide OL-23125-02...
  • Page 20 Configure IP on this interface? [yes]: yes IP address for this interface: 172.1.2.3 Subnet mask for this interface [255.255.0.0] : 255.255.0.0 Class B network is 172.1.0.0, 26 subnet bits; mask is /16 Cisco Integrated Services Router Hardware Installation Guide OL-23125-02...
  • Page 21 “Verifying the Initial Configuration” section on page 4-2 Step 13 verification procedures. After the initial configuration file is created, you can use the Cisco IOS CLI to perform additional configuration. Verifying the Initial Configuration To verify that the new interfaces are operating correctly, perform the following tests: To verify that the interfaces and line protocol are in the correct state—up or down—enter the show...

  • Page 22: Initial Configuration Of The Wireless Access Point

    For information on how to do basic wireless configuration on your router see the “Basic Wireless Device” chapter of the Cisco 860 Series, Cisco 880, and Cisco 890 Series Integrated Services Routers Software Configuration Guide. Cisco Integrated Services Router Hardware Installation Guide...
  • Page 23 Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Cisco Integrated Services Router Hardware Installation Guide OL-23125-02...

  • Page 24: Technical Specifications

    A P P E N D I X Technical Specifications This appendix provides specifications for the Cisco 860, 880, 890 Series ISRs, Cisco 819 ISRs, and the Cisco 812 ISRs: Cisco 810 Series, page A-1 • • Cisco 860, 880, 890 Series, page A-11...
  • Page 25 ICES003 • VCCI-V-3 • AS/NZS CISPR22 • CNS13438 • CISPR22 • CNS13438 • EN300-386 EN61000-3-2 • EN61000-3-3 • EN61000-6-1 • EMC Immunity EN55024/CISPR24 (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, • EN61000-4-6, EN61000-4-11) EN300-386 • Cisco Integrated Services Router Hardware Installation Guide OL-27407-02...
  • Page 26 — 4 dBi (2.4 GHz) 6 dBi (5.875 Ghz) Voltage Standing Wave Ratio — 2.5:1 maximum for all bands Nominal Impedance — 50 ohms 1. Routers shipped in People’s Republic of China. Cisco Integrated Services Router Hardware Installation Guide OL-27407-02...
  • Page 27 Table A-1 lists the operational limits of the Cisco 819 ISR. Operating the router outside of the limits specified is not supported. For the complete list of SKUs available for each Cisco 819 ISRs, see the “SKU Information” section on page 1-14.
  • Page 28 EN61373 Non-op Shock, Class B Heavy-Duty Vehicle SAE J1455 Operating Random Vibe, Cab Mounted Truck Applications SAE J1455 Operating Sinusoidal Vibe, Category 3 SAE J1455 Non-operating Sinusoidal Vibe, Category 3 SAE J1455 Handling Drop Test Certifications Cisco Integrated Services Router Hardware Installation Guide OL-27407-02...
  • Page 29 PWRx-20W-12VDC (10 VDC to 36 VDC operating range) 24 VDC nominal PWRx-20W-24VDC (18 VDC to 75 VDC operating range) Maximum Power 25 W Consumption Maximum Output Power 20 W Rating (5 VDC, 4 Amps) Cisco Integrated Services Router Hardware Installation Guide OL-27407-02...
  • Page 30 Extended Shock-vibe — — EN50155 (EN61373) and RIA20 Maximum Power — — 25 W Consumption Maximum Output Power — — 20 W Rating Operating Temperature — — –13 to 140°F (–25 to 60°C) Cisco Integrated Services Router Hardware Installation Guide OL-27407-02...

  • Page 31: Mean Time Between Failure Ground Benign Environment

    Mean Time Between Failure Ground Benign Environment Table A-4 lists the Mean Time Between Failure (MTBF) values for Cisco 819 ISRs. The MTBF is calculated based on the Ground Benign condition. The values may be adjusted based on the different router usage.

  • Page 32: Supported Power Adapters

    293,000 C819G-4G-G-K9 Supported Power Adapters Table A-5 Table A-6 list the supported power adapters for Cisco 819 ISRs. The PWR1 AC and DC adapters uses molex connector while PWR2 uses barrel-type connector. Table A-5 Cisco 819G ISR Power Adapters C819G+7-K9...
  • Page 33 PWR2-20W-24VDC 24 VDC — Martek MBRH 24 VDC — — — — 0500-B/Q21 Martek MBRH 52 VDC — — — — 0500-C/Q21 Martek MBRH 72 VDC — — — — 0500-D/Q21 Cisco Integrated Services Router Hardware Installation Guide A-10 OL-27407-02...
  • Page 34 Martek MBRH 110 VDC 0500-D/2Q22 Cisco 860, 880, 890 Series This section provides router, port, and cabling specifications for the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs. It contains the following topics: • Router Specifications, page A-12 •...

  • Page 35: Router Specifications

    Cisco 880VA Series, page A-19 • Cisco 890 Series, page A-21 • All Models Except Cisco 860VAE Series Table A-7 lists the system specifications for all models except the Cisco 860VAE series routers. Cisco Integrated Services Router Hardware Installation Guide A-12 OL-27407-02...
  • Page 36 60 W, maximum Output voltages +12 VDC Inline Power-over-Ethernet Adapter Input voltage 85 to 264 VAC Input frequency 47 to 63 Hz Power output 80 W, maximum Output voltage –48 VDC Cisco Integrated Services Router Hardware Installation Guide A-13 OL-27407-02...

  • Page 37: Cisco 860Vae Series

    Appendix A Technical Specifications Cisco 860, 880, 890 Series Cisco 860VAE Series Table A-8 lists the system specifications for the Cisco 860VAE series routers. Table A-8 Router Specifications Design Specification Description Cisco 860VAE series Physical Dimensions Dimensions with antenna and rubber 1.75 x 9.5 x 9 in.
  • Page 38 -5 to 45° C Operating humidity 10% to 90%, non condensing Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 Series Table A-9 lists the system specifications for the Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 series routers. Table A-9 Technical Specifications Description...
  • Page 39 Channels Country-specific: America SKU(-W-A): Channels 1–11 Europe SKU(-W-E): Channels 1–13 Cisco 870 Series Table A-12 lists the system specifications for the Cisco 870 series routers. Table A-10 Router Specifications Description Design Specification Physical Dimensions H x W x D = 2.00 x 10.25 •...
  • Page 40 50 to 60 Hz AC Input Current 1A maximum Maximum output power Output voltage 48 VDC Cisco 880 Series Table A-12 lists the system specifications for the Cisco 880 series routers. Cisco Integrated Services Router Hardware Installation Guide A-17 OL-27407-02...
  • Page 41 Up 10,000 ft: 32 to 77°F (0 to 25°C) • Derating 2.7°F/10000 ft (1.5°C/1000 ft) Operating humidity 10 to 85% relative humidity (noncondensing) Operating altitude 0 to 10,000 ft (0 to 3000m) Cisco Integrated Services Router Hardware Installation Guide A-18 OL-27407-02...

  • Page 42: Cisco 880Va Series

    Appendix A Technical Specifications Cisco 860, 880, 890 Series Cisco 880G Series 3G Wireless Integrated Services Router Table A-12 lists the system specifications for the Cisco 880G series 3G Wireless Integrated Services routers. Table A-12 Router Specifications Description Design Specification...
  • Page 43 100 to 240 VAC Frequency 50 to 60 Hz Maximum output power Output voltages 12 VDC Optional internal PoE with external adapter Maximum output power: 80W • • External output voltage: 48 VDC Cisco Integrated Services Router Hardware Installation Guide A-20 OL-27407-02...
  • Page 44 Appendix A Technical Specifications Cisco 860, 880, 890 Series Cisco 890 Series Table A-12 lists the system specifications for the Cisco 890 series routers. Table A-14 Router Specifications Description Design Specification Physical Dimensions Nonwireless models: Cisco 891, 892, and 892F •...

  • Page 45: Power Supply

    48 VDC Power Supply Table A-15 lists the maximum input values for the power supply used with the Cisco 860, 880, 890 series ISRs. Table A-15 Maximum Input Values for the power supply used with Cisco 860, 880, 890 series ISRs...

  • Page 46: Fe And Ge Port Pinouts

    Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0 and 1. • Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0, 1, 2, and 3. Table A-17...

  • Page 47: Console And Auxiliary Port Connector Pinouts

    FXS and FXO Connector Pinouts (RJ-11-to-RJ-45) Signal RING VDSL2 Port Connector Pinouts Table A-21 lists the VDSL2 connector pinouts. Table A-21 VDSL2 Connector Pinouts (RJ-11-to-RJ-45) RJ-11 Pin Function Unused Unused RING Cisco Integrated Services Router Hardware Installation Guide A-24 OL-27407-02...
  • Page 48 Unused RING Unused Unused G.SHDSL Port Connector Pinouts Table A-24 lists the pinouts for the symmetrical high-speed DSL (G.SHDSL) WAN port for two-pair products, including the following router model(s): C888 • Cisco Integrated Services Router Hardware Installation Guide A-25 OL-27407-02...
  • Page 49 RING (Port0) RING (Port2) TIP (Port3) RING (Port3) Data BRI Port Connector Pinouts Table A-26 lists the pinouts for the Data BRI port. Table A-26 Data BRI Port Pinouts Function Unused Unused Cisco Integrated Services Router Hardware Installation Guide A-26 OL-27407-02...
  • Page 50 Module definition 2 Module definition 1 Module definition 0 Rate Select Loss of signal Receiver ground Receiver ground Receiver ground Inverted received data out Received data out Receiver ground Receiver power Cisco Integrated Services Router Hardware Installation Guide A-27 OL-27407-02...

  • Page 51: Cable Specifications

    The maximum length for the Ethernet cables that connect equipment to the router is 328 feet (100 meters). This length is also the maximum distance between the router and the equipment connected to it. Cisco Integrated Services Router Hardware Installation Guide A-28 OL-27407-02...

This manual is also suitable for:

880 series860 series

Table of Contents