Cisco Catalyst IR1800 Series Installation Manual
Rugged router hardware
Hide thumbs
Also See for Catalyst IR1800 Series:
- Hardware installation manual (112 pages) ,
- Installation manual (92 pages) ,
- Connecting (4 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Cisco Catalyst IR1800 Series
Summary of Contents for Cisco Catalyst IR1800 Series
- Page 1 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide First Published: 2021-02-03 Last Modified: 2021-08-12 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
- Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
-
Page 3: Table Of Contents
Cisco IR1835 Router Front Panel Overview Rear Panel Overview Pluggable Modules Pluggable Interface Module (PIM) SSD Module GNSS Module SFP Modules Wi-Fi Module Gigabit Ethernet Combo Port Gigabit Ethernet Copper Ports Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 4 C H A P T E R 4 Antenna Selection and Installation Introduction to Selecting Antennas Antenna Installation Best Practices Supported Antennas for the IR1800 Series Router Pluggable Interface Modules Wi Fi Modules Indoor Antennas Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 5 Preparing to Connect the Router Preventing Damage to the Router Connecting a PC, Server, or Workstation Connecting a PC to the Console Port Connecting to DC Power and CAN Bus Wiring Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 6 This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves ISED Radiation Exposure Statement Additional Information on RF Exposure EMC Class A Notices and Warnings Declaration of Conformity with Regard to EU Directive 2014/53/EU Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 7 Contents National Restrictions Denmark Italy Latvia Intended Use of equipment Changing Output Power Obtaining Documents from Cisco.com Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 8 Contents Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide viii...
-
Page 9: Preface
RFP documentation, or language that is used by a referenced third-party product. Objective This guide provides an overview of and explains how to install and connect your Cisco IR1800 Router. Audience This guide is intended for people who have a high level of technical ability, although they may not have experience with Cisco software. -
Page 10: Conventions
Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 11 à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 12 Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 13 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 14 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 15 Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.
- Page 16 1040 Warning The covers are an integral part of the safety design of the product. Do not operate the unit without the covers installed. Statement 1077 Warning Hot surface. Statement 1079 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 17: Related Documentation
(Shift-Ctrl-F). Use the Find toolbar to find words or phrases within a specific document. Use the Full Reader Search window to search multiple PDF files simultaneously and to change case sensitivity and other options. Adobe Reader’s online help has more information about how to search PDF documents. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 18 Preface Searching Cisco Documents Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 19: Overview Of Features
USB Ports, on page 23 Overview of Features This chapter provides an overview of the features available in the Cisco Catalyst IR1800 Rugged Series Router (referred to as the IR1800 in the rest of this document). The IR1800 is a next-generation modular industrial router based on Cisco IOS-XE, with advanced features such modular Wi-Fi, modular cellular WAN, Controller Area Network (CAN bus), solid-state drive (SSD), digital I/O, and GPS or GNSS dead reckoning. -
Page 20: Product Overview
(1) RS232 (1) RS232 (1) RS232 (1) RS232 DTE Interface (1) RS232 DCE/RS485 (1) RS232 (1) RS232 Cisco IR1800 Series Platform Features This section describes the different components of the router. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 21: Cisco Ir1821 Router
Product Overview Cisco IR1821 Router Cisco IR1821 Router Figure 1: Cisco IR1821 Router Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 22: Cisco Ir1831 Router
Product Overview Cisco IR1831 Router Cisco IR1831 Router Figure 2: Cisco IR1831 Router Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 23: Cisco Ir1833 Router
Figure 4: Cisco IR1835 Router Front Panel Overview This section describes the components of the IR1800 router. The IR1835 is used as an example since this SKU is the full featured router. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 24: Rear Panel Overview
This section describes the components of the IR1800 router. The IR1835 is used as an example since this SKU is the full featured router. Item Description Wi-Fi Interface Module (WIM) 0/3/0 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 25: Pluggable Modules
Gigabit Ethernet Distance Fiber Commercial Extended Industrial Digital Optical Monitoring 0C to +70C -5C to -40C to +85C +85C GLC-SX-MM-RGD 220-550 m — — — GLC-LX-SM-RGD 550m/10 km MMF/SMF — — — Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 26: Wi-Fi Module
GLC-FE-100LX-RGD 10 km — — — For the most up-to-date list of supported SFP models for Cisco Industrial Ethernet switches, see:https://tmgmatrix.cisco.com/ Wi-Fi Module The Wi-Fi module is expected to be supported in a future software release. Gigabit Ethernet Combo Port The IR1800 supports a single combo fiber and copper port (SFP/RJ45). -
Page 27: Power Over Ethernet
Digital I/O Off: Inactive. Steady Yellow: Active. GNSS Module Steady Green: GNSS/DR configured; location fix achieved. Flashing Green: GNSS DR active; trying to achieve location fix. Off: GNSS DR not configured. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 28: Reset Button
Antenna Selection and Installation, on page 39 lists the supported antennas and accessories for the IR1800 with a wireless pluggable module. For detailed information about Cisco antennas for industrial routers, see the Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide. -
Page 29: Modem Support
B88 - WCDMA US PCS 1900 band B89 - WCDMA (Europe and China) DCS 1800 band B90 - WCDMA US 1700 band B91 - WCDMA US 850 band B114 - WCDMA Europe and Japan 900 band Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 30: Power Supply
(S1) is intended as a DCE port, capable of both RS232 and RS485. RS485 can support full or half duplex. The RJ45 pinouts are shown in the following figure and table: Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 31: Usb Ports
A connection to the USB port can only be made in a nonhazardous environment. The USB port cover must be reinstalled before the router can be deployed in a hazardous environment. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 32 Product Overview USB Ports Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 33: Installing The Router
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 34: Equipment, Tools, And Connections
By default, no antenna is shipped with the IR1800 Series router. Items Shipped with Your Router Unpack the box and verify that all the items listed in the invoice are shipped with the Cisco IR1800. The following items are shipped with your router:... -
Page 35: Installing The Router
1/4 in. (6 to 7 mm). Mounting on a Wall, Table, or Other Flat Surface The Cisco IR1800 can be mounted in a vertical or horizontal orientation. It can be mounted using screws into studs in the wall, or using anchor mounting for hollow walls. - Page 36 Figure 6: Mounting Hole Dimensions Note Mount the router in a proper wall structure to carry the weight of the device. Whenever possible, use a mounting location where the screws will go into wall studs. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 37: Installing A Din Rail
Use appropriate wall anchor mounts. Installing a DIN Rail The DIN rail kit must be ordered separately. The Cisco part number is IR1800-DINRAIL. Note The DIN rail brackets come assembled in horizontal orientation. If your installation requires vertical orientation, disassemble the components and reassemble them. -
Page 38: Mounting The Din Rail Bracket On The Router (Horizontal)
After the bracket is attached to the router, it can be mounted onto the DIN rail. Attaching the Bracket to the DIN Rail To attach the Cisco IR1800 with the bracket to a DIN rail, see the following image and follow the steps provided. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 39 Release the plastic latches after the DIN rail is firmly within the clamps to secure it. The router is now installed in the DIN rail. Step 4 To remove the router from the DIN rail, reverse the procedure. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 40: Changing The Bracket Orientation
Horizontal orientation is shown in the following figure: Figure 8: Horizontal Orientation A vertical orientation is shown in the following figure: Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 41: Bracket Disassembly
Installing the Router Bracket Disassembly Figure 9: Vertical Orientation Bracket Disassembly To disassemble the bracket hardware, see the following figure and follow the steps provided. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 42: Bracket Reassembly
Note: Retain all the components for reuse when mounting with vertical orientation. Bracket Reassembly The following procedure shows how to reattach all of the bracket componants to enable vertical orientation. See the following figure and follow the steps provided. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 43 Installing the Router Bracket Reassembly Procedure Step 1 Slide the two springs (3) onto the thin tabs. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 44: Mounting The Din Rail Bracket On The Router (Vertical)
Reattach the two DIN rail clips (5) to the mounting bracket in a vertical orientation using 9 in-lbs of torque. Mounting the DIN Rail Bracket on the Router (Vertical) Procedure Step 1 Attach the DIN rail bracket to the back of the router, as shown in the following figure. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 45: Installing The Router Ground Connection
Note Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 46 What to do next After you install and properly ground the router, you can connect the power wiring, the LAN cables, and the cables for administrative access, as required for your installation. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 47: Antenna Selection And Installation
Introduction to Selecting Antennas Note Before you install the Cisco IR1800 router on a table, wall, or DIN rail, install the antennas on the pluggable module. It is difficult to install the antennas after the router is installed. This chapter contains information about selecting antennas for the IR1800 router. - Page 48 Solid and precast concrete walls limit signal penetration to one or two walls without degradation of coverage. Concrete and wood block walls limit signal penetration to three or four walls. A signal can penetrate five or six walls constructed of drywall or wood. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 49: Supported Antennas For The Ir1800 Series Router
Antenna Selection Single Port PID LTE CAT4 P-LTE-GB 2 x LTE(4G) antennas P-LTE-NA LTE-ANTM2-SMA-D P-LTE-VZ P-LTE-IN P-LTE-AU P-LTE-MNA LTE CAT6 P-LTEA-LA 2 x LTE(4G) antennas P-LTEA-EA LTE-ANTM2-SMA-D P-LTEAP18-GL 4 x LTE(4G/5G) antennas CAT18 LTE-ANTM2-SMA-D Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 50: Wi Fi Modules
Antenna Type: Dipole Frequency Band: 617-960 MHz 1400-1700 MHz 1710-2690 MHz 3400-3900 MHz 5150-6000 MHz Connector: SMA (m) Indoor W-ANTM2050D-RPSMA Antenna Type: Dipole Wi-Fi Frequency Band: 2400-2500 MHz 5150-5850MHz Connector: RP SMA (m) Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... - Page 51 Antenna Type: Multi-Element Antennas will require proper TNC to SMA adapters. Vehicle Mount/Fixed Connectors: 4G LTE (2x) TNC Infrastructure Location services supported only in domains with GNSS GNSS SMA (m) coverage. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 52 Wi-Fi (4x) RP-SMA (m) Supported Extension Bases and Cables Antenna Type Antenna PID Cable PID Extension Base Indoor (cellular) LTE-ANTM2-SMA-D CAB-L240-10-SM-TM LTE-AE-MAG-SMA CAB-L240-15-SM-TM CAB-L240-20-SM-TM Indoor (Wi-Fi) W-ANTM2050D-RPSMA= Outdoor ANT-4G-OMNI-OUT-N CAB-L240-10-SM-NM — (cellular) ANT-5G-OMNI-OUT-N Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 53 Introduction to Installing Pluggable Interface Modules, on page 45 Installing a PIM, on page 46 Introduction to Installing Pluggable Interface Modules This section describes the equipment and the procedures for successfully installing the Cisco Pluggable Interface Modules (PIM). The highlights of the LTE PIM are:...
- Page 54 The IR1800 may have a blank plate covering the pluggable module slot. If it exists, remove it prior to installing the cellular modem module. The following steps show the LTE pluggable module, however, they apply to other modules as well. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 55 Remove the screw (1) holding the access plate which covers the SIM slots. The access plate is located on the side of the module, as shown in the following figures. Figure 14: SIM Access Plate Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 56 Place the USB cover (1) with the plug indentation against the USB port (2), as shown in the following figure. The half circle of the USB cover fits behind the latch lock screw. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 57 (2) on the face of the device. Push the pluggable module all the way into the device until you feel it seat, and then torque the latch lock screw 8-10 inch-pound (0.9 to 1.1 Newton meter). Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 58 So be sure to consult the corresponding antenna documentation for proper orientation and torque to install them. Note If no antennas are being installed on a port, make sure the caps are installed on the unused connector. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 59 The highlights of the SSD module are: Provides an additional 100 GB of additional Flash memory storage. Provides space to store application data for Cisco IOx. The SSD is a Field Replaceable Unit, but is not hot-swappable. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 60 Step 2 Insert the SSD module into the slot in the panel such that the previously removed screws (1) align with the screw holes (2), as shown in the following figure. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 61 After the module is properly inserted, tighten the module plate to the panel with the two screws. The screws should be torqued to 2-3 in-lb (0.2-0.3 Newton meter). Step 4 The installation is now complete. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 62 SSD Module Installing an SSD Module Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 63 Location: For geo-fencing and asset tracking. GNSS data streaming to applications: Data streams, such as NMEA, are being sent to one or multiple destinations. The following figure shows a GNSS FRU module. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 64 Remove the protective cover over the GNSS slot by removing the two screws (1) using a Phillips driver, as shown in the following figure. Retain these two screws for further use. Figure 23: GNSS Slot Cover Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 65 Step 4 The installation is now complete. Step 5 To remove the module, reverse the steps: a. Power off the device. b. Remove the screws. c. Pull out the module. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 66 GNSS Field Replaceable Unit Module Installation and Removal of a GNSS FRU Module Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 67 Digital input and output can coexist on different channels. LED Indicator: Provisionable; On: Active, Off: Non-active. 4kV surge protected (IEC 61000-4-5). The Digital I/O Connector The following figure shows the connector. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 68 For vehicle installations, it is required to connect the ignition input, and use the Ignition Power Management feature of the router. This eliminates unnecessary power cycling of the router whenever the vehicle is turned off and then turned back on. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 69 High-speed CAN Bus 2.0B: ISO 11898-1 data link layer, ISO 11898-2 and ISO-11898-5 physical layer up to 1 Mbs data rate (software dependent) Maximum cable length between 500 m (125 kbit/s) and 40 m (1 Mbit/s) 120-ohms CAN Bus termination Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 70 The OBDII port is always powered up, even when the vehicle is turned off When connecting an IR1800 CAN Bus, the vehicles owner must review the characteristics of the ODB2 power and fuse protection Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 71 The list of cables is illustrated in the following figure. The box labeled Vehicle Conn is the connector that is connected to a car or truck. The box labeled Tool Conn is for attaching diagnostic tool. The box labeled MiniFit-Jr is the connector that connects to the IR1800. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 72 Digital I/O, Ignition, and CAN Bus Connectivity On-Board Diagnostic (OBD-II) Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 73 If you connect or disconnect the console cable with power applied to the switch or any device on the network, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding. Statement 1080 Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 74 If your laptop or PC warns you that you do not have the proper drivers to communicate with the router, you can obtain them from your computer manufacturer or from this location: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 75 The IR1800 uses a DC power accessory kit (part number PWR-MF4-125W-AC). This needs to be ordered separately. The power entry receptacle is on the IR1800. The pinouts are shown in the following figure. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 76 (CAB-PWR-15-MF4). The following is a diagram of the cable: Verifying Connections To verify that all the devices are properly connected to the router, turn on all the connected devices, and then check the LEDs. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 77 The intent of the IP54 kit is to provide supplementary protection to the router against dust and occasional splashing water. Cisco cannot guarantee prolonged reliable operation of the router if these guidelines are violated.
- Page 78 The front cover is shipped disassembled because it must be assembled onto the IR1800. The front cover comprises four parts. Figure 28: Front Cover Parts From top to bottom, they are: Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 79 The front cover of the IP54 kit is installed around the IR1800 using the four parts previously listed and the screws provided. Before you begin Make sure all cables are removed and that the desired FRUs or blanks are installed before assembling the front IP54 cover. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 80 Step 5 Attach the top cover to the bottom cover using four of the provided screws. All the cables should be wedged between the top and bottom foam pieces. Note Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 81 IP54 back cover, it will interfere with the installation. Step 2 Attach the back cover to the back of the chassis over the pluggable modules using eight of the provided screws. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 82 Tighten the screws to a torque of 5 to 6 in-lbs. Step 4 After the cover is in place, the antennae can be attached to the pluggable modules, as needed. The following figure shows the final assembly. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 83 This chapter provides specifications for the IR1800. Complete specifications for the IR1800 can be found in the marketing data sheet. Router Specifications The following table lists the specifications of the Cisco IR1800. Description Design Specification Dimensions 11.00”W x 7.16” x 2.02”...
- Page 84 Storage Temperature and Altitude Temperature: -40 to +85 degrees C Altitude: up to 15,000 feet Input Voltage Nominal voltage: 12V/24V (+/-20%) Min/Max voltage: +9.6V to +36V DC input Typical Current 5.5A Typical/Maximum Power Consumption Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 85: Related Documentation
The following are the various locations containing important information: Cisco.com: www.cisco.com Warranty Information: www.cisco-warrantyfinder.com Cisco Information Packet, consisting of Cisco Limited Warranty, Disclaimer of Warranty, End User License Agreement, and United States Federal Communications Commission Notice: www.cisco.com/en/US/docs/general/warranty/English/SL3DEN.html Cisco Marketplace: www.cisco.com/pcgi-bin/marketplace/welcome.pl Cisco Product Documentation: www.cisco.com/go/techdocs... -
Page 86: Installation Warning And Caution Statements
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or only nonhazardous locations. Note This equipment is rated as follows- DC Input Voltage: Maximum Operating Range: 9.6V to 32VDC; Nominal: 12/24 VDC. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 87: Hazardous Locations Standards And Marking Strings
Class A Notice for FCC Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In such an event, your right to use the equipment may be limited... -
Page 88: Industry Canada
The Part 15 radio device operates on a noninterference basis with other devices operating at this frequency when using the integrated antennas. Any changes or modification to the product not expressly approved by Cisco could void the user's authority to operate this device. Caution Within the 5.15 to 5.25-GHz and 5.47 to 5.725-GHz bands, this device is restricted to indoor operations to reduce... -
Page 89: European Community, Switzerland, Norway, Iceland, And Liechtenstein
Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies or may require a license for operation or both. For more details, contact the Cisco Corporate Compliance team. -
Page 90: Declaration Of Conformity For Rf Exposure
This section contains information on compliance, with guidelines related to RF exposure. RF Exposure Cisco products are designed to comply with the following national and international standards on human exposure to RF: US 47 Code of Federal Regulations Part 2 Subpart J American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers / IEEE C 95.1... - Page 91 (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code 6. The guidelines include a substantial safety margin designed into the limit to ensure the safety of all persons, regardless of age and health. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
- Page 92 You can obtain additional information from the following organizations: World Health Organization Internal Commission on Non-Ionizing Radiation Protection at this URL: www.who.int/emf United Kingdom, National Radiological Protection Board at this URL: www.nrpb.org.uk Cellular Telecommunications Association at this URL: https://www.ctia.org/ Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 93: Emc Class A Notices And Warnings
Cisco Systems for use within the EU or countries that have implemented the EU directives. The use of software or firmware not supported or provided by Cisco Systems may result in the equipment not being compliant with the regulatory requirements. - Page 94 Tämä laite täyttää direktiivin 2014/53/EU olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen. Svenska [Swedish]: Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 2014/53/EU. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...
-
Page 95: National Restrictions
2,4 GHz frekvenču joslas izmantošanai ārpus telpām nepieciešama atļauja no Elektronisko sakaru direkcijas. Vairāk informācijas: http://www.esd.lv Note Although Norway, Switzerland, Liechtenstein, and Turkey are not EU member states, the EU Directive 2014/53/EU has also been implemented in those countries. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide... -
Page 96: Intended Use Of Equipment
For Cisco IR1800 Series products, go here. Note If you still have questions regarding the compliance of these products, or you cannot find the information you are looking for, send an email to Cisco at complianceinfo@cisco.com. Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide...