Installing The Router Ground Connection - Cisco Catalyst IR1800 Series Installation Manual

Rugged router hardware

Hide thumbs Also See for Catalyst IR1800 Series:

Table of Contents

Installing the Router

Step 2

Attach the DIN mounting bracket to the router using the four 8-32 screws provided in the kit. Position the

bracket over the four mounting holes and insert the screws through the bracket into the chassis. Then use 14

in. lbs. of torque to screw the bracket onto the router.

Step 3

After the bracket is attached to the router, it can be mounted onto the DIN rail.

Installing the Router Ground Connection

Warning

This equipment is intended to be grounded to comply with emission and immunity requirements. Ensure that

the switch functional ground lug is connected to earth ground during normal use. Statement 1064

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available. Statement 1024

Note

Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National

Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.

Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide

Table of Contents

Show Quick Links

Table of Contents

Catalyst ir1821 Catalyst ir1831 Catalyst ir1833 Catalyst ir1835Catalyst ir1800 rugged series