Reset Button; Supported Cisco Antennas And Antenna Accessories - Cisco Catalyst IR1800 Series Installation Manual
Rugged router hardware
Hide thumbs
Also See for Catalyst IR1800 Series:
- Hardware installation manual (112 pages) ,
- Installation manual (92 pages) ,
- Connecting (4 pages)
Table of Contents
Advertisement
Reset Button
LED
Description
Number
6
SSD Module
7
Four Gigabit Ethernet LAN ports labeled 1/0, 1/1,
1/2, 1/3
Note
See the
Configuration Guide
naming conventions.
8
PoE Power Status
9
RJ45 Gigabit Ethernet WAN
Either the SFP or the RJ45 LED will
Note
be On, depending on what type of
interface is used in the combo port.
10
SFP Gigabit Ethernet WAN
Note
Either the SFP or the RJ45 LED will
be On, depending on what type of
interface is used in the combo port.
Reset Button
The Reset button resets the router configuration to the default factory configuration. To perform the reset, use
a standard size #1 paper clip with wire gauge 0.033 inch or smaller, and simultaneously press the Reset button
while applying power to the router.
Note
The reset button does not cause a reset while the device is running.
Supported Cisco Antennas and Antenna Accessories
The IR1800 must have a pluggable module with antenna ports installed in order to connect to antennas. The
base unit does not have any wireless capabilities on its own.
The Chapter
the IR1800 with a wireless pluggable module. For detailed information about Cisco antennas for industrial
routers, see the
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
20
IR1800 Software
for Cisco IOS-XE
Antenna Selection and Installation, on page 39
Cisco Industrial Routers and Industrial Wireless Access Points Antenna
LED Status
Steady Green: SSD is being accessed.
Off: No power or is not enabled.
Steady Green: Port is up with link.
Flashing Green: Link with activity.
Off: Port is off or down.
Steady Green: POE or POE+ power supplied on one LAN Port.
Off: No POE or POE+ power in any LAN port.
Steady Green: Port is up with link.
Flashing Green: Link with activity.
Off: No link, or port is off.
Steady Green: Port is up with link.
Flashing Green: Link with activity.
Off: No link, or port is off.
lists the supported antennas and accessories for
Product Overview
Guide.
- Quick Links:
- Cisco Ir1821 Router
- Cisco Ir1835 Router
Hide quick links:
Advertisement
Table of Contents
