Power Over Ethernet; Front Panel Leds - Cisco Catalyst IR1800 Series Installation Manual
Rugged router hardware
Hide thumbs
Also See for Catalyst IR1800 Series:
- Hardware installation manual (112 pages) ,
- Installation manual (92 pages) ,
- Connecting (4 pages)
Table of Contents
Advertisement
Product Overview
Power over Ethernet
A 30.8W capacity PoE PSE power supply is built into the IR1800. The power supply can power any of the LAN
switch ports that are compliant with PoE and PoE+ 802.3af and 802.3at Powered Device (PD) specification,
subject to 30.8 W maximum power shared among all ports.
Front Panel LEDs
The following figure shows the locations of the LEDs.
Table 5: LED Descriptions
LED
Description
Number
1
Ignition Status
2
System Status
3 and 4
Digital I/O
5
GNSS Module
LED Status
Off: Ignition power management is disabled when SYS LED is on.
Steady Green combined with SYS LED Off: Ignition signal is off (power
management is enabled).
Steady Green combined with SYS LED On: Ignition signal is on.
Flashing Green with Ignition Off: Timer counts down when SYS LED is
on.
Steady Yellow: Ignition power management feature is not loaded.
Steady Green: Operational.
Flashing Green: Cisco IOS-XE booting.
Steady Yellow: System in ROMMON mode.
Off: No power.
Off: Inactive.
Steady Yellow: Active.
Steady Green: GNSS/DR configured; location fix achieved.
Flashing Green: GNSS DR active; trying to achieve location fix.
Off: GNSS DR not configured.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Power over Ethernet
19
- Quick Links:
- Cisco Ir1821 Router
- Cisco Ir1835 Router
Hide quick links:
Advertisement
Table of Contents
