Memory - Cisco IR829 Hardware Installation Manual
Industrial integrated services router
Hide thumbs
Also See for IR829:
- Product manual (16 pages) ,
- Hardware installation manual (87 pages) ,
- Hardware installation manual (69 pages)
Table of Contents
Advertisement
Product Overview
General Description
Table 1
LED Descriptions (continued)
LED
WLAN
CELLULAR0/
CELLULAR1
CELLULAR0/
CELLULAR1
SIM0/SIM1
Table 2
RSSI LED
Memory
The Cisco IR829 uses flash memory and main memory. The flash memory contains the Cisco IOS software image and the boot flash
contains the ROMMON boot code. All memory components are factory default and not upgradeable by the end user.
Table 3
shows the memory allocation.
Table 3
Cisco IR829 Memory
Memory
DDR
Boot ROM
System Flash
Activity
2.4GHz
5GHz
ACT
RSSI
Sim cards
RSSI
RSSI (2)
Green
< -110dBm
Off
-110 to -90dBm
Off
-90 to -75dBm
Off
-75 to -60dBm
Off
> -60dBm
On - Green
Description
Off — Radio is down (no SSID configured)
Flashing Green — Bootloader, IOS Ethernet Initialization, IOS
Start Up after system initialization.
Green to Red to Amber — Discovery/Join process.
Rapid Flashing Green — Joined to a controller
Steady Green — One wireless client is associated.
Off — Module not powered on
On — Module is powered on and connected but not transmitting or
receiving
Slow Flash — Module is powered on and searching for connection
Fast Flash — Module is transmitting or receiving.
The RSSI LEDs are a 3 LED bar graph to indicate signal strength.
Their functionality is described in the RSSI LED figure below.
Off — No USIM
Green — USIM installed and active
RSSI (1)
RSSI (0)
Green
Green/Amber
Off
Off
Off
On - Amber
Off
On - Green
On - Green
On - Green
On - Green
On - Green
Capacity
2GB
16MB
4GB
17
- Quick Links:
- Power Supply
- Connecting to DC Power
Hide quick links:
Advertisement
Table of Contents
