Displaying Ml-Series Ethernet Ports Provisioning Information On Ctc; Figure - Cisco ONS 15454 Software Feature And Configuration Manual
Sonet / sdh ml-series multilayer ethernet card
Hide thumbs
Also See for ONS 15454:
- Procedure manual (850 pages) ,
- Reference manual (728 pages) ,
- Troubleshooting manual (558 pages)
Table of Contents
Advertisement
Chapter 2
CTC Operations
Table 2-4
Parameter
Rx Runts
Rx Longs
Rx Total Errors
Rx Crc Errors
Rx Input Drop Packets
Rx Input Abort Packets Number of received packets aborted on input
Tx Pre Hdlc Bytes
Tx Post Hdlc Bytes
Tx Packets
Port Drop Counts
Displaying ML-Series Ethernet Ports Provisioning Information
on CTC
The Ethernet port provisioning window
card's Ethernet ports. Click the Provisioning > Ether Ports tabs to display this window. For ML-Series
cards, only the Port Name field can be provisioned from CTC. The user must configure ML-Series ports
through the Cisco IOS CLI.
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
POS Parameters (continued)
Meaning
Total number of frames received that are less than 64 bytes in length and
have a CRC error
Counter for the number of received frames that exceed the maximum valid
packet length of 1518 bytes
Total number of receive errors
Number of packets with a CRC error
Number of received packets dropped on input
Number of bytes transmitted prior to the bytes undergoing HLDC
encapsulation by the policy engine
Number of bytes transmitted after the bytes undergoing HLDC
encapsulation by the policy engine
Number of packets transmitted since the last counter reset
Number of received frames dropped at the port level
Displaying ML-Series Ethernet Ports Provisioning Information on CTC
(Figure 2-3 on page
2-6) displays the provisioning status of the
2-5
Advertisement
Table of Contents
