Configuring Access Control List Size In Tcam - Cisco ONS 15454 Software Feature And Configuration Manual
Sonet / sdh ml-series multilayer ethernet card
Hide thumbs
Also See for ONS 15454:
- Procedure manual (850 pages) ,
- Reference manual (728 pages) ,
- Troubleshooting manual (558 pages)
Table of Contents
Advertisement
Chapter 14
Configuring the Switching Database Manager
To configure SDM maximum size for each application region, perform the following procedure,
beginning in global configuration mode:
Command
Step 1
Router(config)# sdm size
region-name
[k-entries] num-of-entries
Step 2
Router(config)# end
The following is an example of limiting the IP-Prefix region to 2K entries:
Router # configure terminal
Router(config)# sdm size ip-prefix k-entries 2
Router(config)# end
To display the number of available TCAM entries, enter the show sdm size command from global
configuration mode:
Router # show sdm size
Active Switching Database Region Maximum Sizes :
Configuring Access Control List Size in TCAM
The default maximum size of the Access Control List (ACL) is 65,536 64-bit entries. You can enter the
sdm access-list command to limit the TCAM space for ACLs, as shown in
Table 14-2 Partitioning the TCAM Size for ACLs
Task
sdm access-list num-entries
The following output is an example of configuring 8,192 entries for the ACL region in TCAM:
Router# configure terminal
Router(config)# sdm access-list 8192
Router(config)# end
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
IP Adjacency
: 65536
IP Prefix
: 204864-bit entries
QoS Classifiers
: 65536
IP VRF Prefix
: 65536
IP Multicast
: 65536
MAC Addr
: 65536
Access List
: 6553664-bit entries
Purpose
Sets the name of the application region whose size you want to
configure. You can enter the size as multiples of 1K (that is, 1024)
entries or in absolute number of entries.
Exits to privileged EXEC mode.
64-bit entries
64-bit entries
64-bit entries
64-bit entries
64-bit entries
Command
Sets the name of the application region for which you want to
configure the size. You can enter the size as an absolute number
of entries.
Configuring SDM
Table
14-2.
14-3
Advertisement
Table of Contents
