Brother mfc8440 Service Manual page 212
Hide thumbs
Also See for mfc8440:
- User manual (426 pages) ,
- Software user's manual (183 pages) ,
- Quick setup manual (52 pages)
Table of Contents
Advertisement
Error Message
DX Lever Error
The paper adjustment lever for
duplex printing is not correctly set
for the paper size.
Fuser Open
The fuser cover is open.
Machine Error XX
Machine has a mechanical
problem.
Out of Memory
You can't store data in the
memory.
No
The number you dialed does not
Response/Busy
answer or is busy.
Not
You tried to access a One-Touch
Registered
or Speed-Dial number that is not
programmed.
PLS Open Cover
A page, piece of paper or paper
clip, etc. may be jammed inside
the machine.
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Cause
Set the duplex lever to the correct
position.
Please close the jam clear cover.
(See Paper Jam on page 6-13.)
Refer to
the "MACHINE ERROR X X"
message'.
(Fax sending in process)
Press Stop button and wait until the
other operations in progress finish
and then try again.
- OR -
Clear the data in the memory.
(Copy operation in process)
Press Stop button and wait until the
other operations in process finish
and then try again.
- OR -
Clear the data in the memory.
- OR -
Add an optional memory.
(Printing operation in process)
Reduce print resolution.
- OR -
Clear the data in the memory.
- OR -
Add an optional memory.
Verify the number and try again.
Set up the One-Touch or Speed-
Dial number.
Open the front cover. If you see
any jammed paper or other item,
gently pull it out, then close the
front cover. If the error message
remains, open and close the front
cover again. If the machine cannot
reset itself and return to the date
and time prompt, it will display
Machine Error XX.
Refer to
the "MACHINE ERROR X X"
message'.
6-5
SERVICE MANUAL
Action
'2.2 Error Codes Shown in
'2.2 Error Codes Shown in
Advertisement
Chapters
Table of Contents
Troubleshooting
