Cisco RV130 Administration Manual page 52
Multifunction vpn router
Hide thumbs
Also See for RV130:
- Features & specifications (4 pages) ,
- Quick start manual (13 pages) ,
- Quick manual (3 pages)
Table of Contents
Advertisement
Configuring Networking
Configuring IPv6
STEP 5
STEP 6
STEP 7
STEP 8
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
DHCP Status
Domain Name
Server Preference
Static DNS 1
Static DNS 2
Client Lease Time
Choose Networking > IPv6 > IPv6 LAN Configuration.
In the IPv6 Address Pools Table, click Add Row.
Enter this information:
Start Address
End Address
IPv6 Prefix Length
Click Save.
To edit the settings of a pool, select the pool and click Edit. To delete a selected
pool, click Delete. Click Save to apply changes.
Check to enable the DHCPv6 server.
When enabled, the device assigns an IP address
within a specified range and provides additional
information to any LAN endpoint that requests
DHCP addresses.
(Optional) Domain name of the DHCPv6 server.
Server preference level of this DHCP server. DHCP
advertise messages with the highest server
preference value to a LAN host are preferred over
other DHCP server advertise messages.
The default is 255.
IPv6 address of the primary DNS server on the ISP
IPv6 network.
IPv6 address of the secondary DNS server on the
ISP IPv6 network.
Client lease time duration (in seconds) for which
IPv6 addresses are leased to endpoints on the
LAN.
Starting IPv6 address of the pool.
Ending IPv6 address of the pool.
Prefix length that determines the number of
common initial bits in the network addresses.
3
49
Hide quick links:
Advertisement
Table of Contents
