Cisco RV130 Administration Manual page 13
Multifunction vpn router
Hide thumbs
Also See for RV130:
- Features & specifications (4 pages) ,
- Quick start manual (13 pages) ,
- Quick manual (3 pages)
Table of Contents
Advertisement
Viewing Device Status
Viewing the System Summary
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
•
Mode—Displays Gateway if NAT is enabled, or Router.
•
DNS 1—Primary DNS server IP address of the WAN port.
•
DNS 2—Secondary DNS server IP address of the WAN port.
•
DDNS—Indicates whether the Dynamic DNS is enabled or disabled.
IPv6 Configuration
•
LAN IP—LAN IP address of the device.
•
WAN IP—WAN IP address of the device.
•
Gateway—IP address of the gateway to which the device is connected (for
example, the cable modem).
•
Prefix Delegation—Prefix returned from the device at the ISP, which is
provided to IPv6 addresses on the device.
•
DNS 1—IP address of the primary DNS server.
•
DNS 2—IP address of the secondary DNS server.
Wireless Summary
Displays the public name and security settings for your wireless networks
configured on the Wireless > Basic Settings page. For more information, see
Configuring Basic Wireless
Firewall Setting Status
Displays DoS, WAN request and remote management settings configured on the
Firewall > Basic Settings page. For more information, see
Firewall
Settings.
VPN Setting Status
Displays available IPsec and PPTP VPN connections, and the connected users for
each VPN type.
•
IPsec Connections Available—Number of available IPsec VPN
connections.
•
PPTP VPN Connections Available—Number of available PPTP VPN
connections.
•
Connected IPsec Users—Number of connected IPsec VPN users.
•
Connected PPTP VPN Users—Number of connected PPTP VPN users.
Settings.
2
Configuring Basic
14
Hide quick links:
Advertisement
Table of Contents
