hit counter script
Cisco RV130 Administration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. RV130
  6. Administration manual

Cisco RV130 Administration Manual

Multifunction vpn router
Hide thumbs Also See for RV130:
Table of Contents

Advertisement

Quick Links

ADMINISTRATION
GUIDE
Cisco RV130 Multifunction VPN Router
Cisco RV130W Wireless Multifunction VPN Router

Advertisement

Table of Contents
loading

Related Manuals for Cisco RV130

Summary of Contents for Cisco RV130

  • Page 1 ADMINISTRATION GUIDE Cisco RV130 Multifunction VPN Router Cisco RV130W Wireless Multifunction VPN Router...
  • Page 2 Revised August 2014 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership...

  • Page 3: Table Of Contents

    Chapter 3: Configuring Networking Configuring WAN Settings Configuring Wired WAN Connections Configuring DHCP Configuring Static IP Configuring PPPoE Configuring PPTP Configuring L2TP Configuring Optional Settings Configuring a Mobile Network Configuring Global Mobile Network Settings Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 4 Configuring the IP Mode Configuring IPv6 Configuring the IPV6 WAN Connection Configuring IPv6 LAN Connections Configuring IPv6 Static Routing Configuring Routing (RIPng) Configuring Tunneling Viewing IPv6 Tunnel Status Configuring Router Advertisement Configuring Advertisement Prefixes Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 5 Adding or Editing a Firewall Schedule Configuring Services Management Configuring Access Rules Adding Access Rules Creating an Internet Access Policy Adding or Editing an Internet Access Policy Configuring One-to-One Network Address Translation (NAT) Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 6 Chapter 7: Configuring Quality of Service (QoS) Configuring Bandwidth Management Configuring Bandwidth Configuring Bandwidth Priority Configuring QoS Port-Based Settings Configuring CoS Settings Configuring DSCP Settings Chapter 8: Managing Your Device Setting Device Properties Setting Password Complexity Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 7 Restoring the Configuration Settings Copying the Configuration Settings Generating an Encryption Key Upgrading Firmware or Changing the Language Upgrading Firmware Automatically Upgrading Firmware Manually Changing the Language Restarting the Device Restoring the Factory Defaults Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 8: Getting Started

    Opens the LAN Configuration page to modify LAN parameters. For example, the management IP address. See Configuring LAN Settings. Configure Wireless Open the Basic Settings page to manage the Settings radio. See Configuring Wireless Networks. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 9 Displays the IPsec VPN Server page that lists the VPN managed by this device. See Viewing Site- to-Site IPsec VPN Connection Status. Other Resources Support Click to open the Cisco support page. Forums Click to visit Cisco online support forums. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 10: Connecting To Your Wireless Network

    If you did not enable security (not recommended), leave the wireless encryption fields that were configured with the security type and passphrase blank. Verify your wireless connection and save your settings. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 11: Chapter 2: Viewing Device Status

    The Dashboard page also displays an interactive view of your device’s back panel when you click Show Panel View. Mouse-over each port to view port connection information. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 12: Viewing The System Summary

    WAN IP—WAN IP address of the device. To release the current IP address and obtain a new one, click Release or Renew. • Gateway—IP address of the gateway to which the device is connected (for example, the cable modem). Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 13 IPsec Connections Available—Number of available IPsec VPN connections. • PPTP VPN Connections Available—Number of available PPTP VPN connections. • Connected IPsec Users—Number of connected IPsec VPN users. • Connected PPTP VPN Users—Number of connected PPTP VPN users. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 14: Viewing Active Tcp/Ip Services

    IPsec VPN policies on the device. For information on configuring VPN policies, see Configuring Basic Site-to-Site IPsec VPN. To change the rate at which latest and real-time connection status is displayed, choose a refresh rate from the Refresh Rate drop-down list. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 15: Viewing The Ipsec Vpn Server Status

    The event severity levels are listed from the highest severity to the lowest severity, as follows: • Emergency—Messages about events such as a system crash. • Alert—Messages about conditions that require immediate corrective action. • Critical—Messages for when the system is in a critical condition. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 16: Viewing Connected Devices

    Address Resolution Protocol (ARP) request. If a device does not respond to the request, it is removed from the list. IPv6 NDP Table displays all IPv6 Neighbor Discovery Protocol (NDP) devices connected to the device’s local link. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 17: Viewing Port Statistics

    To view the mobile network status, choose Status > Mobile Network. The following information is displayed: • Connection—Device connected to the guest network. • Internet IP Address—IP address assigned to the USB device. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 18 IMS—The unique identification associated with the GSM, UMTS, or LTE network mobile phone users. • Carrier—Mobile network carrier. • Service Type—Type of service accessed. • Signal Strength—Strength of the wireless mobile network signal. • Card Status—Status of the data card. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 19: Chapter 3: Configuring Networking

    If you do not have DNS server addresses from your ISP, choose Get Dynamically from ISP. • To use the DNS servers provided by OpenDNS (208.67.222.222, 208.67.220.220) to resolve your web addresses, choose Use OpenDNS. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 20: Configuring Static Ip

    Select a PPPoE profile or click Configure Profile to create a new profile. STEP 3 On the PPPoE Profiles page, enter the following information (you might need to STEP 4 contact your ISP to obtain your PPPoE login information): Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 21 When you select this option, the Internet connection is always on. In the Redial Period field, enter the number of seconds after which the device attempts to reconnect if it is disconnected. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 22: Configuring Pptp

    IP address of the default gateway. PPTP Server IP address of the Point-To-Point Tunneling Protocol server. Username The username assigned to you by the ISP. Password The password assigned to you by the ISP. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 23 Protocol when connecting with the ISP. Service Name Enter a name for the new PPTP service. MPPE Encryption Check the Enable check box to enable Microsoft Point-to-Point Encryption for the PPTP connection. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 24: Configuring L2Tp

    The L2TP version that you want to use. If you select version 3, enter the vendor ID, and the virtual circuit Cookie Length The size of the cookie in the L2TP v3 data packet, which identifies the L2TP session. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 25 Virtual Circuit ID The identifier for the Layer 2 circuit over which L2TP data packets are carried. This information is required if you selected Cisco as the Vendor ID for L2TP v3. Username Enter your username assigned to you by the ISP.

  • Page 26: Configuring Optional Settings

    If your ISP requires a custom MTU setting, choose Manual and enter the MTU size. Size The custom MTU size. The standard MTU value for Ethernet networks is usually 1500 bytes. For PPPoE connections, the value is 1492 bytes. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 27 VLAN configured on other switches in the network. You may need to change the management VLAN to limit access to Device Manager. Click Save. STEP 2 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 28: Configuring A Mobile Network

    Alive to keep the connection active at all times. • To connect or disconnect your modem connection manually, select Manual mode. The device displays the current modem connection status that includes initializing, connecting, disconnecting, or disconnected. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 29: Configuring Mobile Network Settings Manually

    Authentication used by your service provider. The value can be changed by choosing the authentication type from the drop-down list. The default is Auto. If you do not know which type of authentication to use, select Auto. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 30: Bandwidth Cap Setting

    Configuring Log E-Mailing. When enabled by checking the box, email is sent when: • Mobile network usage has exceeded a given percentage. • The device fails over to the backup pathway and recovers. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 31: Setting Failover And Recovery

    Use the next hop gateway (by default the device pings the default gateway) or choose a custom site and enter the site IPv4 or IPv6 address. Click Save to save your settings. STEP 8 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 32: Configuring Lan Settings

    Also, instead of using a DNS server that maps Internet domain names (for example, www.cisco.com) to IP addresses, you can use a Windows Internet Naming Service (WINS) server. A WINS server is the equivalent of a DNS server, but uses the NetBIOS protocol to resolve hostnames.

  • Page 33: Configuring Dhcp Server

    (Optional) Select a VLAN to edit from the drop-down list. STEP 2 In the DHCP Server field, select one of the following options: STEP 3 Enable Allows the device to act as the DHCP server in the network. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 34 If you selected DHCP Relay, enter the address of the relay gateway in the Remote STEP 4 DHCP Server field. The relay gateway transmits DHCP messages to network device, including those on other subnetworks. Click Save. STEP 5 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 35: Configuring Vlans

    Frames of the VLAN are sent tagged to the port VLAN. Excluded—The port is currently not a member of the VLAN. This is the default for all the ports when the VLAN is first created. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 36: Configuring Static Dhcp

    A and F (inclusive). To edit the settings of a static DHCP client, select the client and click Edit. To delete a selected DHCP client, click Delete. Click Save to apply the changes. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 37: Viewing Dhcp Leased Clients

    LAN IP address, but it cannot be identical to the IP address given to the LAN interface of this gateway. To configure DMZ: Choose Networking > LAN > DMZ Host. STEP 1 Check Enable to enable DMZ on the network. STEP 2 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 38: Configuring Rstp

    The max age is the time period that the router waits to receive a hello message. If the max age is reached, the router tries to change the spanning tree. Enter a number from 6 to 40. The default is 20. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 39: Port Management

    You can configure the speed and flow control settings of the device LAN ports. To configure port speeds and flow control: Choose Networking > Port Management. STEP 1 Configure this information: STEP 2 Port The port number. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 40: Configuring Link Aggregation

    Link aggregation groups improve the cost effectiveness of your device by increasing cumulative bandwidth without requiring hardware upgrades, and facilitates easy rerouting in case of a single port or cable failure. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 41: Cloning The Mac Address

    To set the MAC address of the WAN port to your PC MAC address, click Clone My PC’s MAC. • To specify a different MAC address, enter it in the MAC Address field. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 42: Configuring Routing

    The router determines the network packets’ route based on the fewest number of hops between the source and the destination. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 43: Configuring Inter-Vlan Routing

    You can also use static routes to reach peer routers that do not support dynamic routing protocols. Static routes can be used together with dynamic routes. The device supports up to 30 static routes. Be careful not to introduce routing loops in your network. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 44: Viewing The Routing Table

    Show IPv4 Routing Table—The routing table is displayed with the fields configured in the Networking > Routing page. • Show IPv6 Routing Table—The routing table is displayed with the fields configured in the Networking > IPv6 page. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 45: Configuring Dynamic Dns

    (Read-only) Indicates that the DDNS update has completed successfully or the account update information sent to the DDNS server failed. Click Test Configuration, to test the DDNS configuration. STEP 6 Click Save. STEP 7 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 46: Configuring The Ip Mode

    In the Domain and IP fields, enter up to five domain-to-IP mappings. The 6to4 tunneling feature is typically used when a site or end user wants to connect to the IPv6 Internet using the existing IPv4 network. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 47: Configuring Ipv6

    Click Save. STEP 3 Configuring DHCPv6 If your ISP provides you with a dynamically assigned address, configure the device to be a DHCPv6 client. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 48 IP address of the server at the ISP. Static DNS 1 IP address of the primary IPv6 DNS server. Static DNS 2 IP address of the secondary IPv6 DNS server. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 49 Keeps the WAN link up by sending a keep-alive message through the port. In the redial period field, enter the number of seconds after which the device attempts to reconnect if it is disconnected. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 50 Default IPv6 Gateway IP address of the default IPv6 gateway. Static DNS 1 IP address of the primary DNS server. Static DNS 2 IP address of the secondary DNS server. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 51: Configuring Ipv6 Lan Connections

    Click Save or continue to configure IPv6 DHCP LAN settings. STEP 3 Enter the following information to configure the DHCPv6 settings: STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 52 Click Save. STEP 8 To edit the settings of a pool, select the pool and click Edit. To delete a selected pool, click Delete. Click Save to apply changes. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 53: Configuring Ipv6 Static Routing

    Entering an inactive route is useful if the route is not available when you add the route. When the network becomes available, you can enable the route. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 54: Configuring Routing (Ripng)

    On your device, RIPng is disabled by default. To configure RIPng: Choose Networking > IPv6 > Routing (RIPng). STEP 1 Check Enable. STEP 2 Click Save. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 55: Configuring Tunneling

    • IPv4 Mask Length For ISATAP Tunneling, choose Auto or Manual. If you choose Manual, enter the STEP 5 following information: • IPv6 Prefix • IPv6 Prefix Length Click Save. STEP 6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 56: Viewing Ipv6 Tunnel Status

    This is stateless IPv6 auto-configuration, and the device distributes IPv6 prefixes to all nodes on the network. To configure the RADVD: Choose Networking > IPv6 > Router Advertisement. STEP 1 Enter this information: STEP 2 RADVD Status Check Enable to enable RADVD. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 57 (interpreting the router preference value). These values are ignored by hosts that do not implement router preference. This feature is useful if there are other RADVD-enabled devices on the LAN. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 58: Configuring Advertisement Prefixes

    IPv4 network. It is used when an end user wants to connect to the IPv6 Internet using their existing IPv4 connection Global/Local—A locally unique IPv6 address that you can use in private IPv6 networks or a globally unique IPv6 Internet address. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 59 Prefix Lifetime Prefix lifetime, or the length of time over which the requesting router is allowed to use the prefix. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 60 Configuring Networking Configuring IPv6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 61 Configuring Networking Configuring IPv6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 62: Chapter 4: Configuring Wireless Networks

    For wireless products such as access points, routers, and gateways, you are asked for a password when you want to change their settings. These devices have a default password. The default password is often cisco. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 63 • Enable MAC address filtering. Cisco routers and gateways give you the ability to enable MAC address filtering. The MAC address is a unique series of numbers and letters assigned to every networking device.

  • Page 64: General Network Security Guidelines

    Enabled SSID Enabled Disabled Disabled Disabled Broadcast Security Disabled Disabled Disabled Disabled Mode MAC Filter Disabled Disabled Disabled Disabled VLAN Wireless Disabled Disabled Disabled Disabled Isolation with SSID Enabled Enabled Enabled Enabled Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 65: Configuring Basic Wireless Settings

    B/G-Mixed Choose this option if you have Wireless-B and Wireless-G devices in your network. G/N-Mixed Choose this option if you have Wireless-G and Wireless-N devices in your network. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 66: Editing Wireless Network Settings

    To configure wireless network settings: Check the box for the networks that you want to configure. STEP 1 Click Edit. STEP 2 Configure the following settings: STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 67: Configuring The Security Mode

    WPA. WEP may be required if your network devices do not support WPA. If you do not have to use WEP, we recommend that you use WPA2. If you are using NOTE the Wireless-N only mode, you must use WPA2. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 68 In the TX Key field, choose which key to use as the shared key that devices must STEP 8 use to access the wireless network. Click Save to save your settings. STEP 9 Click Back to go back to the Basic Settings page. STEP 10 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 69 We recommend using a security key that registers on the strength meter as secure. To show the security key as you are entering it, check the Unmask Password box. STEP 7 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 70 In the Shared Key field, enter an alphanumeric phrase. STEP 8 In the Key Renewal field, enter the duration of time (600–7200 seconds) between STEP 9 key renewals. The default value is 3600. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 71: Configuring Mac Filtering

    Click Add to MAC to add the selected devices in the Client List Table to the MAC STEP 7 Address Table. Click Save to save your settings. STEP 8 Click Back to go back to the Basic Settings page. STEP 9 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 72: Configuring Time Of Day Access

    (enabled). WMM No Enabling WMM No Acknowledgement can result in more Acknowledgement efficient throughput, but higher error rates in a noisy Radio Frequency (RF) environment. By default, this setting is disabled. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 73 Auto to have the device automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto-Fallback will negotiate the best possible connection speed between the device and a wireless client. The default is Auto. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 74 Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain at its default value of 2346. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 75: Detecting Rogue Access Points

    To enable Rogue AP detection: Choose Wireless > Rogue AP. STEP 1 Click the Rogue AP Detection On radio button. STEP 2 Click Save. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 76: Importing Authorized Ap Lists

    STEP 9 Importing Authorized AP Lists You can import a list of authorized access points using a CSV file. Use the following values as a reference when you create the CSV file. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 77 • 4 — 2.427 • 5 — 2.432 • 6 — 2.437 • 7 — 2.442 • 8 — 2.447 • 9 — 2.452 • 10 — 2.457 • 11 — 2.462 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 78: Configuring Wds

    To establish a WDS link, the device and other remote WDS peers must be configured in the same wireless network mode, wireless channel, wireless band selection, and encryption types (None or WEP). Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 79 Enter the MAC address of a wireless access point in the MAC field. • Click Show Available Networks to display the Available Networks Table. Click Connect to add the MAC address of the selected access point to the MAC field. Click Save. STEP 5 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 80: Configuring Wps

    Internet. You can configure Captive Portal verification to allow access for both guest and authenticated network users. Configure Captive Portal instances for each virtual wireless network on your device by associating it with a portal profile. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 81 Save your profile. To preview this profile, choose Captive Portal > Portal Page Preview, and select the profile from the Portal Profile drop-down list. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 82 Administration > Users page is displayed. In the Import Username and Password section, click Browse to locate the file, and click Import. See Importing User Accounts for more information. Save your user accounts. STEP 6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 83: Configuring Device Mode

    Configuring Optional Network Settings. To configure the device mode: Choose Wireless > Device Mode, and select the mode in which you want to run STEP 1 your device. Click Save. STEP 2 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 84 Configuring Wireless Networks Configuring Device Mode Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 85: Chapter 5: Configuring The Firewall

    LAN, such as chat rooms or games. You can block specific groups of PCs on your network from being accessed by the WAN or public DMZ network. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 86: Configuring Basic Firewall Settings

    Blocks ping requests to the device from the WAN. LAN/VPN Web Access Choose the type of web access that can be used to connect to the firewall: HTTP or HTTPS (secure HTTP). Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 87 Enabling this setting blocks Java applets from being downloaded. Click Auto to automatically block Java, or click Manual and enter a specific port on which to block Java. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 88 Enabling this feature blocks proxy servers. Click Auto to automatically block proxy servers, or click Manual and enter a specific port on which to block proxy servers. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 89: Configuring Remote Management

    CAUTION knows its IP address. Because a malicious WAN user can reconfigure the device and misuse it, it is highly recommended that you change the administrator and any guest passwords before continuing. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 90: Configuring Universal Plug And Play

    In the Scheduled Time of Day section, choose the time when you want the STEP 5 schedule to apply. If you choose Specific Time, enter the start and end times. Click Save. STEP 6 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 91: Configuring Services Management

    In the End Port field, enter the last TCP or UDP port of the range that the service STEP 6 uses. Click Save. STEP 7 To edit an entry, select the entry and click Edit. Make your changes, then click Save. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 92: Configuring Access Rules

    Move to. Click Save. STEP 4 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 93: Adding Access Rules

    File Transfer Protocol (FTP) • Hyptertext Transfer Protocol (HTTP) • Secure Hypertext Transfer Protocol (HTTPS) • Trivial File Transfer Protocol (TFTP) • Internet Message Access Protocol (IMAP) • Network News Transport Protocol (NNTP) Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 94 IP address of incoming IP packets as they pass through the firewall. Check the Rule Status Enable check box, to enable the new access rule. STEP 8 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 95: Creating An Internet Access Policy

    Allow by schedule—Allows Internet traffic according to a schedule. If you chose Block by schedule or Allow by schedule, click Configure Schedules to create a schedule. See Managing Firewall Schedules. Choose a schedule from the drop-down menu. STEP 6 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 96 Value field. To block a URL that has the keyword “example” in the URL, choose Keyword from the drop- down menu and enter example in the Value field. Click Save. STEP 9 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 97: Configuring One-To-One Network Address Translation (Nat)

    The Single Port Forwarding Rules and Port Range Forwarding Rules pages list all the available port forwarding rules for this device and allow you to configure port forwarding rules. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 98: Configuring Single Port Forwarding

    80 of the IP address of a web server on the LAN side. In the Enable field, check the Enable box to enable the rule. STEP 8 Click Save. STEP 9 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 99: Configuring Port Range Forwarding

    LAN IP or IP range. Ports are also not left open when not in use, which provides a level of security that port forwarding does not offer. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 100 In the Interface drop-down menu, choose Both (Ethernet & 3G), Ethernet, or 3G. STEP 5 In the Enable field, check the Enable box to enable the rule. STEP 6 Click Save. STEP 7 Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 101 Configuring the Firewall Configuring Port Forwarding Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 102: Chapter 6: Configuring Vpn

    In the Pre-Shared Key field, enter the pre-shared key, or password, that will be STEP 3 exchanged between the two routers. It must be between 8 and 49 characters. In the Endpoint Information fields, enter the following information: STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 103: Viewing Default Values

    Click View Default Settings to view the default values used in the basic VPN settings. These values are proposed by the VPN consortium and assume that you are using a pre-shared key, or password that is known to both your device and the remote endpoint. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 104: Configuring Site-To-Site Ipsec Vpn Advanced Parameters

    In the Encryption Algorithm field, choose the algorithm to encrypt data. b. In the Authentication Algorithm field, specify the authentication algorithm for the VPN header. Ensure that the authentication algorithm is configured identically on both sides of the VPN tunnel. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 105: Managing Vpn Policies

    In the Add / Edit VPN Policy Configuration section: STEP 2 a. In the Policy Name field, enter a unique name to identify the policy. b. In the Policy Type field, choose one of the following options: Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 106 Manual Encryption Algorithm—Select the algorithm used to encrypt the data. • Key-In, Key-Out—Enter the encryption key of the inbound and outbound policy. The length of the key depends on the encryption algorithm chosen: Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 107 DH Group is configured identically on both sides of the IKE policy. • Select IKE Policy—Choose the IKE policy that will define the characteristics of the SA negotiation. Click Save. STEP 6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 108: Configuring Ipsec Vpn Server

    Ensure that the DH Group is configured identically on both your device and the remote endpoint. e. In the IKE SA-Lifetime field, enter the duration, in seconds, after which the Security Association for the VPN connection is renegotiated. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 109: Configuring Ipsec Vpn User Accounts

    The password can be up to 64 characters long. To import usernames and passwords from a CSV file, click Import. The STEP 4 Administration > Users page is displayed. In the Import Username and Password Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 110: Configuring Pptp

    Enter the username and password that will authenticate the PPTP user. Enter STEP 2 values that are between 4 to 32 characters long. Check the Enable check box for the user. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 111: Configuring Vpn Passthrough

    To configure VPN passthrough: Choose VPN > VPN Passthrough. STEP 1 Check the Enable check box to choose the type of traffic to allow to pass through STEP 2 the device. Click Save. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 112 Configuring VPN Configuring VPN Passthrough Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 113: Chapter 7: Configuring Quality Of Service (Qos)

    ISP appears in the Bandwidth section. In the Bandwidth Table, enter the following information for the WAN interface: STEP 3 Upstream The bandwidth (kb/s) used for sending data to the Internet. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 114: Configuring Bandwidth Priority

    Remarking Check to enable remarking on Differentiated Services Code Point (DSCP). Enabling this feature prioritizes the network traffic across the LAN based on the DSCP queue mapping on the DSCP Settings page. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 115 To delete an entry from the table, check the relevant box and click Delete. Click Save. To add a new service definition, click the Service Management button. You can define a new service to use for all firewall and QoS definitions. See Configuring Services Management. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 116: Configuring Qos Port-Based Settings

    Choose a priority level for outbound traffic (1 to 3). Forwarding Queue for Untrusted Devices Click Save. STEP 3 To restore the default port-based QoS settings, click Restore Default and save your changes. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 117: Configuring Cos Settings

    For each DSCP value in the DSCP Settings Table, choose a priority level from the STEP 3 Queue drop-down menu. This maps the DSCP value to the selected QoS queue. Click Save. STEP 4 To restore the default DSCP settings, click Restore Default and Save. Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...
  • Page 118 Configuring Quality of Service (QoS) Configuring DSCP Settings Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide...

  • Page 119: Chapter 8: Managing Your Device

    You can enforce a minimum password complexity requirement for password changes. To configure password complexity settings: Choose Administration > Password Strength. STEP 1 In the Password Complexity Settings field, check Enable. STEP 2 Configure password complexity settings: STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 120: Configuring User Accounts

    Configuring User Accounts Your device supports two user accounts for administering and viewing settings: an administrative user (default user name and password: cisco) and a guest user (default user name: guest). The guest account has read-only access. You can set and change the username and password for both the administrator and guest accounts.

  • Page 121: Importing User Accounts

    You can import several users at the same time using a CSV file. Ensure that the data in the CSV file is arranged as shown in the following tables: TYPE USERNAME PASSWORD Admin Admin123 Admin123 Guest Guest123 Guest123 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 122 To import user accounts from a CSV file: In the Import User Name & Password field, click Browse. STEP 1 Locate the file and click Open. STEP 2 Click Import. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 123: Setting The Session Timeout Value

    To enable SNMP: Choose Administration > SNMP. STEP 1 Check Enable to enable SNMP. STEP 2 Select the SNMP version in the Mode field. STEP 3 Enter this information: STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 124: Editing Snmpv3 Users

    Authentication and Privacy. Authentication and No Privilege—Submit only Authentication algorithm and password. Authentication and Privilege—Submit Authentication and privacy algorithm and password. Authentication Select the type of authentication algorithm (MD5 or Algorithm Server SHA). Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 125: Configuring The Snmp Traps

    Public community. SNMP Version Select the SNMP version: v1, v2c, or v3. SNMP Trap Severity Choose the severity level at which the device must Level send trap messages. Click Save. STEP 3 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 126: Using Diagnostic Tools

    You can use the PING utility to test connectivity between this router and another device in the network. You can also use the Ping tool to test connectivity to the Internet by pinging a fully qualified domain name (for example, www.cisco.com). To use PING: Choose Administration >...

  • Page 127: Configuring Port Mirroring

    STEP 2 From the Mirror Port drop-down menu, choose a mirror port. If you use a port for STEP 3 mirroring, do not use it for any other traffic. Click Save. STEP 4 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 128: Configuring Log And E-Mail Settings

    Sends an email alert when the device is booting up. New Firmware available Sends an email alert when new firmware is available for the device. Click Add Row. STEP 4 Configure the following settings: STEP 5 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 129 To enable these logging settings, check this box. Click Save. STEP 6 To edit an entry in the Logging Setting Table, select the entry and click Edit. Make your changes, then click Save. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 130: Configuring Log E-Mailing

    Send to E-mail Enter an email address to which to send logs (for Address (1) example, logging@companyname.com). Send to E-mail Address (2) (Optional) Send to E-mail Address (3) (Optional) Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 131 Time If you chose a daily or weekly schedule for sending logs, choose the time of day at which to send the logs. Click Save. STEP 6 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 132: Configuring Bonjour

    Choose Administration > Time Settings. The current time is displayed. STEP 1 Enter information in the following fields: STEP 2 Time Zone Select your time zone, relative to Greenwich Mean Time (GMT). Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 133: Backing Up And Restoring The System

    When the firewall is working as configured, you can back up the configuration for restoring later. During backup, your settings are saved as a file on your PC. You can restore the firewall settings from this file. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 134: Backing Up The Configuration Settings

    Backup configuration Select this option to back up the current configuration settings. To download a backup file based on the selected configuration option, STEP 3 click Download. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 135: Restoring The Configuration Settings

    To copy a configuration (for example, to copy a startup configuration to the backup configuration): Choose Administration > Backup/Restore Settings. STEP 1 In the Copy field, choose the source and destination configurations from the drop- STEP 2 down menus. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 136: Generating An Encryption Key

    Interval - Check every field. In the Automatically Upgrade field, choose if you want to upgrade to the latest STEP 3 firmware immediately after a new version is detected, or at a specified time. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 137: Upgrading Firmware Manually

    After the new firmware image is validated, the new image is written to flash, and the device is automatically rebooted with the new firmware. Choose Status > System Summary to make sure the router installed the new STEP 6 firmware version. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

  • Page 138: Changing The Language

    CAUTION PC, or use the router until the operation is complete. This should take about a minute. When the test light turns off, wait a few more seconds before using the router. Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 139 Managing Your Device Restoring the Factory Defaults To restore factory defaults to the router: Choose Administration > Restore Factory Defaults. STEP 1 Click Default. STEP 2 Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 140 Managing Your Device Restoring the Factory Defaults Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...
  • Page 141 Software Search box. Cisco Open Source Requests www.cisco.com/go/ smallbiz_opensource_request Cisco Partner Central www.cisco.com/web/partners/sell/smb (Partner Login Required) Product Documentation Cisco RV130/RV130W www.cisco.com/en/US/products/ps9923/ Wireless Multifunction VPN tsd_products_support_series_home.html Router Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide...

This manual is also suitable for:

Rv130w

Table of Contents