Configuring Vlans - Cisco RV130 Administration Manual
Multifunction vpn router
Hide thumbs
Also See for RV130:
- Features & specifications (4 pages) ,
- Quick start manual (13 pages) ,
- Quick manual (3 pages)
Table of Contents
Advertisement
Configuring Networking
Configuring LAN Settings
STEP 1
STEP 2
STEP 3
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
Configuring VLANs
A virtual LAN (VLAN) is a group of endpoints in a network that are associated by
function or other shared characteristics. Unlike LANs that are typically
geographically based, VLANs can group endpoints without regard to the physical
location of the equipment or users.
The device has a default VLAN (VLAN 1) that cannot be deleted. You can create up
to four other VLANs on the device.
To create a VLAN:
Choose Networking > LAN > VLAN Membership.
Click Add Row.
Enter the following information:
VLAN ID
Description
Port 1
Port 2
Port 3
Port 4
Numerical VLAN ID to assign to endpoints in the VLAN
membership. The number you enter must be between
3 to 4094. VLAN ID 1 is reserved for the default VLAN,
and is used for untagged frames received on the
interface.
A description that identifies the VLAN.
You can associate VLANS on the device to the LAN
ports on the device. By default, all LAN ports belong to
VLAN1. You can edit these ports to associate them
with other VLANS. Choose the outgoing frame type for
each port:
Untagged—The interface is an untagged member of
the VLAN. Frames of the VLAN are sent untagged to
the port VLAN.
Tagged—The port is a tagged member of the VLAN.
Frames of the VLAN are sent tagged to the port VLAN.
Excluded—The port is currently not a member of the
VLAN. This is the default for all the ports when the
VLAN is first created.
3
32
Hide quick links:
Advertisement
Table of Contents
