Attaching A Proxy Profile To An Interface - Cisco ASR 9000 Series Configuration Manual
Aggregation services router broadband
network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Establishing Subscriber Sessions
Command or Action
Configuring the Client Lease Time: An example
configure
dhcp ipv4
profile profile1 proxy
lease proxy client-lease-time 600
!
!
end
Attaching a Proxy Profile to an Interface
Preform this task to attach a proxy profile to an interface. After it is attached, the various settings specified
in the proxy profile take effect on the interface.
SUMMARY STEPS
1. configure
2. dhcp ipv4
3. interface type interface-path-id proxy profile profile-name
4. Use the commit or end command.
5. show dhcp ipv4 proxy profile name name
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
dhcp ipv4
Example:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
Step 3
interface type interface-path-id proxy profile
profile-name
Example:
RP/0/RSP0/CPU0:router(config-dhcpv4)#
interface Bundle-Ether 344 proxy profile
profile1
Step 4
Use the commit or end command.
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
Purpose
Enters global configuration mode.
Enters the IPv4 DHCP configuration mode.
Enters the Interface configuration mode and assigns a proxy
profile to an interface.
commit—Saves the configuration changes and remains within
the configuration session.
Enabling DHCP Proxy
4.3.x
131
Advertisement
Chapters
Table of Contents
