Configuring A Policy With Spi In The Input Or Output Direction Using Radius - Cisco ASR 9000 Series Configuration Manual
Aggregation services router broadband
network gateway
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring a Policy with SPI in the Input or Output Direction Using RADIUS
commit
Configuring a Policy with SPI in the Input or Output Direction Using RADIUS
Perform this task to configure a policy with shared policy instance in the input or output direction using
RADIUS.
SUMMARY STEPS
1. configure
2. policy-map policy_map_name
3. class {class_name | class-default} [type qos]
4. service-policy service_policy_name
5. Use the commit or end command.
6. policy-map policy_map_name
7. class {class_name | class-default} [type qos]
8. police rate value
9. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
policy-map policy_map_name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
policy1
Step 3
class {class_name | class-default} [type qos]
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class-default
Step 4
service-policy service_policy_name
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
service-policy policy1_child
Step 5
Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
198
Purpose
Enters global configuration mode.
Creates or modifies a policy map that can be attached to one or
more interfaces to specify a service policy, and enters the
policy-map configuration submode.
Specifies the name of the class whose policy you want to create or
change and enters the policy map class configuration submode.
This example configures a traffic policy for the default class of the
traffic policy policy1. The default class is named class-default.
Attaches a policy map to an input or output interface.
commit—Saves the configuration changes and remains within the
configuration session.
Deploying the Quality of Service (QoS)
OL-28375-03
Advertisement
Chapters
Table of Contents
