• If the appliance has a child safety device, we recommend you ac- tivate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not change the specification of this appliance. www.zanussi.com...
13 amp mains plug. If it is necessary to between the appliance and the carpet. change the fuse in the mains plug, use a 13 Electrical connection amp ASTA (BS 1362) fuse. • Warning! Risk of fire and electrical shock. www.zanussi.com...
Page 4
We recommend only the use of original • Do not touch the glass of the door while a spare parts. programme operates. The glass can be hot. • Make sure that you remove all metal objects from the laundry. www.zanussi.com...
Child safety coming trapped inside the drum this machine incorporates a special feature. Make sure that children or pets do not climb into the drum. To prevent children and pets be- www.zanussi.com...
These are presented by relevant numbers on the following pages. Programme selector dial EXTRA RINSE button SPIN button START/PAUSE button OPTIONS button DELAY START button PREWASH button DOOR LOCKED pilot light EASY IRON button Display Table of symbols Night Cycle Rinse Hold www.zanussi.com...
Page 7
• light off: the door can be opened. The pro- A very short cycle for lightly soiled items or for gramme is finished or the water has been laundry which needs only freshening up. We emptied out. recommend that you reduce the amount of fab- ric you load. www.zanussi.com...
6 seconds, the acoustic signal is 1. Before pressing button 7: it will be impos- deactivated (except if there is a fault). By sible to start the machine. pressing these 2 buttons again, the acoustic signal is reactivated. www.zanussi.com...
(See "Washing programmes" for the maximum al- lowed spin speed). Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a www.zanussi.com...
Page 10
You can cancel or modify the delay time at any Interrupting a programme moment, before you press button 7. Press the button 7 to interrupt a programme Selecting the delay start : which is running, the corresponding pilot light www.zanussi.com...
Never wash whites and coloureds together. or tie them up in a bag or net. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time. www.zanussi.com...
Page 12
Although biodegradable, detergents contain instructions. When the degree of hardness is substances which, in large quantities, can up- soft, readjust the quantity of the detergent. set the delicate balance of nature. 1) do not use acetone on artificial silk www.zanussi.com...
Note: A single or bulky item may cause imbalance. If the appli- ance doesn’t perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...
Page 14
At the end of the soak (after having emptied out the water) you can select the washing programme (first turn the pro- gramme selector dial to , then to the programme and press the button 5). www.zanussi.com...
Page 15
3) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results. 4) Max. load with Easy iron option 1 kg 5) If using liquid detergents, a programme without PREWASH must be selected. www.zanussi.com...
Flush it should be removed. out under a tap, to Open the pump door. remove any traces of Place a container accumulated powder. close to the pump to collect any spillage. www.zanussi.com...
Page 17
• Screw the hose back onto the tap. Make sure the connection is tight. Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cov- er firmly by turning it clockwise. www.zanussi.com...
7 blinks, one of the fol- local Service Centre. lowing alarm codes appears on the display and some acoustic signals sound every 20 sec- onds to indicate that the machine is not work- ing: www.zanussi.com...
Page 19
An option or a programme that ends with the water still in the tub or a and/or does not spin: that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry. www.zanussi.com...
Page 20
In this case, redistribute the load manually and select the machine does not spin: spin programme. • Redistribute the laundry. The load is too small. • Add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...
Follow the instructions supplied with the kit. Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. www.zanussi.com...
Page 23
3/4” Never place cardboard, wood or similar materi- thread. Always als under the machine to compensate for any use the hose unevenness in the floor. supplied with the appliance. www.zanussi.com...
Page 24
Min. 60 cm (23.6”) Max. 90 cm (35.4”) Water drainage This appliance is designed to be permanently plumbed into your home's drainage system us- ing one of the following methods. 1. Into a drainage standpipe. www.zanussi.com...
>PP<=polypropylene household waste. Return the product to your This means that they can be recycled by dis- local recycling facility or contact your municipal posing of them properly in appropriate collec- office. tion containers. www.zanussi.com...
Page 26
• Normally soiled laundry may be washed without prewashing in order to save deter- • Measure out detergent according to the wa- gent, water and time (the environment is pro- ter hardness, the degree of soiling and the tected too!). quantity of laundry being washed. www.zanussi.com...