Table of Contents
Advertisement
Qosmio F60 Series
Problem
The reaction of Touch
pad is either too
sensitive or not
sensitive enough.
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
9-16
Procedure
Adjust the touch sensitivity.
1. Click Start -> Control Panel -> Hardware
and Sound -> Mouse (under "Devices and
Printers").
2. Within the Mouse Properties window, click
the Device Settings tab.
3. Click the Settings...button.
4. The Properties for Synaptics TouchPad™
on PS/2 Port screen appears. Double-click
Sensitivity in the Select an item -> Pointing
section on the left side of the screen.
5. PalmCheck™ and Touch Sensitivity are
displayed. Click Touch Sensitivity.
6. Move the slide bar for Touch Sensitivity to
make an adjustment. Click the OK button.
7. Click the OK button on the Device Settings
tab.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
In this instance the system might be busy -
Try moving the mouse again after waiting a
short while.
Remove the mouse from the computer and then
reconnect it to a free USB port it in order to
ensure it is firmly attached.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
(under "Devices and Printers").
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.
User's Manual
Advertisement
Table of Contents
