Writing CD/DVD/BDs ........4-12 TOSHIBA DVD PLAYER ........4-23...
Page 3
Front operation panel........8-2 TOSHIBA Button Support ........8-3 Remote controller .
Page 4
Appendix G Starting the TOSHIBA PC Health Monitor ..... G-2 Cleaning the cooling module ....... G-2...
Page 5
This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Qosmio F60 Series Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.
Page 6
“CE” and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE-marking: TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Germany. Manufacturer: Toshiba Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan...
EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.
Page 8
For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
Page 9
ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.
The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
Qosmio F60 Series Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. Panasonic Communications DVD Super Multi UJ890AD/UJ890ED with Labelflash™ The DVD Super Multi drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
Page 12
Qosmio F60 Series BD ROM UJ141/BD-RE UJ240 The BD-R/RE drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 13
Qosmio F60 Series International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service...
Page 14
Qosmio F60 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S...
TV program using the My TV feature of Media Center or the Full size remote controller. This manual tells how to set up and begin using your Qosmio F60 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Page 16
Qosmio F60 Series Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM).
Page 17
Qosmio F60 Series Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.
Qosmio F60 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Qosmio F60 Series Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use.
Page 20
Qosmio F60 Series The cautions on use of a Qosmio F60 Series computer 1. Clean any dust accumulated on the computer’s cooling vents. The cooling vents are located on the left side and underside of the computer. When you use your computer in a dusty area, dirt and debris may accumulate on the cooling vents at the under side of your unit.
Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Page 22
TOSHIBA HDD/SSD Alert TOSHIBA Recovery Media Creator TOSHIBA eco Utility TOSHIBA ConfigFree™ TOSHIBA Assist TOSHIBA USB Sleep and Charge Utility TOSHIBA Password Utility TOSHIBA DVD PLAYER WinDVD BD for TOSHIBA (Is preinstalled in some models) Windows Mobility Center Online Manual User’s Manual...
Qosmio F60 Series Getting Started This chapter provides basic information to start using your computer. It covers the following topics: All users should be sure to read the section Starting up for the first time. Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.
Modes. Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Page 25
Qosmio F60 Series 1. Connect the power cord to the AC adaptor. Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.
Qosmio F60 Series Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.
Qosmio F60 Series Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes, for more information.
Qosmio F60 Series Make sure the Hard Disk Drive indicator is off. If you turn off the power while a disk (disc) is being accessed, you may lose data or damage the disk. Never turn off the power while an application is running. Doing so could cause loss of data.
Page 29
Qosmio F60 Series When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, Start -> Control Panel -> System and Security -> Power Options). To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time.
Qosmio F60 Series Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down. Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored.
Qosmio F60 Series Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below: 1.
Creating optical Recovery Discs and restoring the pre-installed software from them Restoring the pre-installed software from the Recovery hard disk drive Ordering Recovery Discs from TOSHIBA and restoring the pre-installed software from them* * Please note that this service is not free-of-charge.
Qosmio F60 Series Creating Optical Recovery Discs This section describes how to create Recovery Discs. Be sure to connect the AC adaptor when you create Recovery Discs. Be sure to close all other software programs except the Recovery Media Creator.
Page 34
1. Turn off your computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.
2. While holding down F12 key on the keyboard, turn on your computer - when TOSHIBA Leading Innovation>>> appears, release the F12 key. 3. Use the up and down cursor keys to select the CD-ROM icon from the menu.
Qosmio F60 Series Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Appendix H or click the *1 above.
Qosmio F60 Series Keep foreign metal objects, such as screws, staples and paper clips, out of the Bridge media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Wireless...
Qosmio F60 Series eSATA/USB combo One eSATA/USB combo port, which complies to port the USB 2.0 standard, is provided on the left hand side of the computer. The ports with the icon ( ) has USB Sleep and Charge. This port has eSATA (External Serial ATA) function.
Qosmio F60 Series Microphone and Line This jack allows you to connect a microphone or in jack an external audio device. Universal Serial Bus Two Universal Serial Bus ports, which comply (USB 2.0) ports with the USB 2.0 standard, are provided on the right hand side of the computer.
Qosmio F60 Series DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the...
Qosmio F60 Series Memory module The memory module slots are located here. The slots memory module slots allow for the installation, replacement and removal of additional memory modules. Please refer to the Additional memory module section in Chapter 3, Hardware, Utilities Options.
Page 43
You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
Page 44
Qosmio F60 Series Touch Pad control The control buttons located below the Touch Pad buttons allow you to select menu items or manipulate text and graphics as designated by the on-screen pointer. Touch Pad The Touch Pad located in the center of the palm rest is used to control the movement of the on-screen pointer.
Qosmio F60 Series Indicators This section explains indicator functions. System indicators The LED system indicators for specific computer operations glow when those operations are in progress. Figure 2-7 System indicators DC IN The DC IN indicator normally glows white when power is being correctly supplied from the AC power adaptor.
Qosmio F60 Series Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the NUMLOCK indicators which show the following conditions: When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed.
This section describes the types of writable CD/DVD/BD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Please refer to Chapter 4, Operating Basics, for further information.
Page 48
Qosmio F60 Series CD-R discs can be written only once. The recorded data cannot be erased or changed. CD-RW discs including multi speed CD-RW discs, high-speed CD-RW discs and ultra-speed CD-RW discs can be recorded more than once. DVDs DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) discs can be written only once.
Qosmio F60 Series DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
Page 50
Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Processor The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start -> All Programs -> TOSHIBA -> Utilities -> PC Diagnostic Tool.
Page 52
Qosmio F60 Series Video RAM The memory in a computer’s graphics adaptor, used to store the image displayed on a bitmap display. Start -> Control Panel -> Appearance and Personalization -> Display -> Adjust resolution. The amount of Video RAM can be verified by clicking the Advanced settings button in the Display Settings window.
Page 53
Qosmio F60 Series RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure.
Qosmio F60 Series Optical disc drive BD-R/RE drive Some models are equipped with a full-size BD-R/RE drive module that lets you record data to rewritable CD/DVD/BDs. It reads BD-ROM discs at a maximum 6x speed, BD-ROM (DL) discs at a maximum 6x speed, DVD-ROM’s at a maximum 8x speed and CD-ROM’s at a...
Page 55
Qosmio F60 Series DVD Super Multi The drive reads DVD-ROM’s at a maximum 8x drive speed and CD-ROM’s at a maximum 24x speed, and writes CD-R’s and CD-RW’s at up to 24x speed, DVD-R’s, DVD+R’s and DVD+RW’s at up to 8x speed, DVD-RW’s, DVD-R (Dual Layer)
Page 56
Qosmio F60 Series Graphics controller The graphics controller maximizes display performance. Refer to Display Controller and Video mode section in Appendix B for more information. Legal Footnote (Graphics Processor Unit (“GPU”)) For more information regarding the Graphics Processor Unit (“GPU”),...
Page 57
You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
Page 58
Qosmio F60 Series Microphone and A 3.5mm mini microphone jack enables Line in jack connection of a three-conductor mini jack for stereo microphone input, and connection of a stereo device for audio input. TV Tuner TV Tuner enables watching and recording TV programs.
Connects a security lock to anchor the computer to a desk or other large object. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
Page 60
Qosmio F60 Series Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer. Instant security A specific hot key function automatically locks the system providing data security. Intelligent power A microprocessor in the computer’s intelligent power supply detects the battery’s charge,...
Page 61
Qosmio F60 Series The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. TOSHIBA HDD Protection cannot be used in models that are equipped with SSD. Optical Drive Auto This function is provided with some models.
Refer to Appendix G, TOSHIBA PC Health Monitor. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Button This utility controls the computer panel functions. Support The starting application of the button can be changed.
Bluetooth functions cannot be used in models that do not have a Bluetooth module installed. TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides access to specific tools, utilities and applications that make the use and configuration of the computer easier.
Page 64
Qosmio F60 Series TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the identification of communication problems and allow the creation of profiles if you need to switch between different locations and communication networks.
Page 65
This utility includes wizard functions to monitor Alert Utility the Disk Drive operating status. To access the utility, click Start -> All Programs - > TOSHIBA -> Utilities -> HDD SSD Alert. TOSHIBA Service This application allows your computer to Station...
Page 66
(click Start, point to the arrow icon and then select Lock from the menu). TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. TOSHIBA USB Sleep This utility is able to either enable or disable the and Charge Utility USB Sleep and Charge function.
Qosmio F60 Series Optional devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes the connection or installation of the following devices: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.
Qosmio F60 Series Bridge media slot The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
Qosmio F60 Series Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
Qosmio F60 Series Media care Observe the following precautions when handling the card. Card care Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid.
Qosmio F60 Series Inserting a memory media The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below: 1. Turn the memory media so that the contacts (metal areas) are face down.
Qosmio F60 Series Removing a memory media The following instructions apply to all types of supported media devices. To remove a memory media, follow the steps as detailed below: 1. Open the Safely Remove Hardware icon on the Windows Taskbar.
The computer will operate in dual channel mode. You can access the inserted memory modules efficiently in dual channel. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions.
Qosmio F60 Series Installing a memory module The computer contains slots for two memory modules, one positioned immediately over the other - the procedures are the same for installing either module. 1. Shut down the computer - make sure the Power indicator is off (refer to...
Page 75
Qosmio F60 Series 7. Align the notch of the memory module with that of the memory module slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.
Qosmio F60 Series 8. Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed. 1. Screw 2. Memory module cover Figure 3-6 Seating the memory module cover 9.
Qosmio F60 Series 8. Grasp the memory module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them.
Qosmio F60 Series The computer is equipped with the Universal Serial Bus ports that can accommodate some kinds of devices These ports comply with the USB 2.0 standard. USB FDD Kit The USB floppy diskette drive accommodates either a 1.44MB or 720KB a 3.5"...
Page 79
Qosmio F60 Series In use, the following should be noted regarding the operation of the USB floppy diskette drive: The drive should be placed on a flat, horizontal surface. Do not set the drive on an incline greater than 20° while it is operating.
Qosmio F60 Series eSATA (External Serial ATA) An device corresponding to eSATA function can be connected to the eSATA/USB combo port on the computer. Connecting the eSATA device To connect an eSATA device, follow the steps as detailed below: 1. Connect an eSATA cable to the eSATA/USB combo port.
Qosmio F60 Series External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps as detailed below: 1. Turn the computer’s power off. 2. Connect the monitor cable to the external monitor port.
Qosmio F60 Series HDMI A HDMI monitor can be connected to the HDMI out port on the computer. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors have not been confirmed, some HDMI monitors may not function properly.
Qosmio F60 Series Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. Be sure to use the FN + F5 HotKey to select the display device before starting to play video.
Qosmio F60 Series Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: Use the TV remote control to output the computer screen onto the TV screen.
Qosmio F60 Series Optional accessories You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your...
Qosmio F60 Series Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.
Qosmio F60 Series Touch Pad Gesture There are four convenient gestures that make users operate the system easier and faster. In the Mouse Properties you can enable/disable these functions. ChiralMotion You can scroll vertically and horizontally. To enable these features, select the Enable vertical scrolling and Enable horizontal scrolling check boxes.
It enables the transmission of video and use of video chat via the internet using specialized applications. The effective pixel count for this web camera is 1.0 million (maximum photograph size: 1280x800 pixels) or 0.3 million. Please refer to the TOSHIBA Web Camera Application Help for details. User’s Manual...
Page 90
Qosmio F60 Series 1. Web Camera LED 2. Web Camera Figure 4-2 Web Camera Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens. Doing so may reduce image quality. Use an eyeglass cleaner (cleaning cloth) or other soft cloth to clean the lens if it becomes dirty.
Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> Face Recognition. The Registration screen is displayed for a logged-in user whose face has not been registered.
Delete image data, account information, and personal record data created during registration. To delete the Face Recognition Data, follow the steps as described below: 1. To launch this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> Face Recognition. The Management screen is displayed.
Legal Disclaimer “Log Record function of the Toshiba Face Recognition software” When using the feature “Log Record function” of the Toshiba Face Recognition software please make sure that the usage is in line with applicable legal requirements especially data protection laws in your country of usage as well as with company internal regulations if any.
Qosmio F60 Series Loading discs To load a disc, follow the steps as detailed below: 1. When the computer’s power is on, press the eject button to open the disc tray slightly. Grasp the disc tray gently and pull until it is fully opened.
Qosmio F60 Series When the disc tray is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the disc tray. After seating the disc, however, make sure it lies flat.
Qosmio F60 Series How to remove discs when the disc tray will not open Pressing the eject button will not open the disc tray when the computer power is off. If the power is off, you can open the disc tray by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole near the eject button.
You can use the DVD Super Multi drive to write data to either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM discs. TOSHIBA Disc Creator and Corel DVD MovieFactory are provided as writing software with this computer.
CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket.
Page 100
Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.
Page 101
(BD-RE and BD-RE (Dual Layer) media). Before writing or rewriting with the DVD Super Multi drive Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, however, it must be noted that disc quality can affect write or rewrite success rates.
Page 102
Qosmio F60 Series DVD-R (Dual Layer): MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-R for Labelflash: FUJIFILM CORPORATION (for 16x speed media) DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media) TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media) DVD+R (Double Layer): MITSUBISHI KAGAKU MEDIA CO., LTD.
Page 103
Qosmio F60 Series There are two types of DVD-R media available, authoring discs and general use discs. Do not attempt to use authoring discs as only general use discs can be written to by a computer drive. You can use both DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge.
CD/DVD - do not try to write from shared devices such as a server or any other network device. Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.
Disc Creator. TOSHIBA Disc Creator cannot record in packet format. You might not be able to use the “Disc Backup” function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.
Page 106
1. Click Start -> All Programs -> TOSHIBA -> CD&DVD Application -> Disc Creator to access the TOSHIBA Disc creator utility. 2. Open the Data CD/DVD Setting dialog box by one of the following...
Page 107
How to make a Blu-ray Disc Movie Simplified steps for making a Blu-ray disc movie: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> DVD MovieFactory Launcher to launch DVD MovieFactory. 2. Click Create Video Disc -> New Project to invoke the 2nd Launcher, choose Blu-ray, and then invoke DVD MovieFactory.
Page 108
TOSHIBA DVD PLAYER software application. When playing your recorded Blu-ray Disc on your computer, please use the WinDVD BD for TOSHIBA software application. If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.
Qosmio F60 Series TOSHIBA DVD PLAYER Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER: Notes on use Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles.
Page 110
Qosmio F60 Series Display Devices & Audio “TOSHIBA DVD PLAYER” will only run when “Colors” is set to “True color (32 bit)”. Click Start -> Control Panel -> Appearance and Personalization -> Display -> Adjust resolution, click “Advanced settings”, select “Monitor” tab, set “colors” to “True color (32 bit)”.
TOSHIBA DVD PLAYER. Figure 4-1 Application selection screen 2. Touch the CD/DVD Play/Pause panel on the Front operation panel. Or select Start -> All Programs -> TOSHIBA DVD PLAYER -> TOSHIBA DVD PLAYER to start “TOSHIBA DVD PLAYER”. Operating TOSHIBA DVD PLAYER Notes on Using “TOSHIBA DVD PLAYER”.
Please be aware of the following limitations when you use WinDVD BD for TOSHIBA: Notes on use “WinDVD BD for TOSHIBA” is for Blu-ray Disc playback only. DVD playback is not supported. Please use “TOSHIBA DVD PLAYER” for DVD playback.
Starting WinDVD BD for TOSHIBA Use the following procedure to start “WinDVD BD for TOSHIBA”. 1. When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA starts automatically. 2. Touch the CD/DVD Play/Pause panel on the Front operation panel. Or select Start ->...
Qosmio F60 Series Media care This section provides tips on protecting data stored on your CD’s, DVD’s, BD’s and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it.
Qosmio F60 Series 8. Data may be lost if the floppy diskette is twisted, bent, or exposed to direct sunlight, extreme heat or cold. 9. Do not place heavy objects on your floppy diskettes. 10. Do not eat, smoke, or use items such as erasers near your floppy diskettes as foreign particles inside the jacket of the floppy diskette can damage the magnetic surface.
Qosmio F60 Series Connecting the Cable This section describes how to connect the coaxial cable to your computer. Connecting the coaxial cable When lightning occurs, do not touch the antenna line. This may cause an electric shock. If you have to operate your computer during a thunderstorm and are connecting the TV tuner to an outside antenna, you should operate your computer using AC power mode.
Qosmio F60 Series Sound system This section describes some of the audio control functions. Adjusting System Volume You can control the overall level of sound using Windows Volume Mixer. To launch Volume Mixer, follow the steps below. 1. Locate the Speaker icon on the task tray.
Qosmio F60 Series HDMI Output should be selected when connecting the HDMI cable to the HDMI jack for playing digital sound on digital audio equipment. Microphone is the default input device. It should be selected when using the computer’s internal microphone or an external microphone connected to the Microphone jack to record sound.
Qosmio F60 Series Wireless communications The computer’s wireless communication function supports both Wireless LAN and Bluetooth devices. Some models are equipped with both Wireless LAN and Bluetooth functions. Wireless LAN The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.11 Wireless LAN...
If this occurs, the outsider may illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology...
This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR/ 2.1+EDR specification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. Release Notes related to the Bluetooth Stack for Windows by TOSHIBA 1.
Qosmio F60 Series The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to a LAN.
Qosmio F60 Series 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. 1. LAN jack 2. LAN cable Figure 4-8 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector or router.
Qosmio F60 Series Using the cleaning cloth Some models include 1 cleaning cloth. The cleaning cloth can be used to wipe away dust and fingerprints from the keyboard and palm rest area of your computer. When wiping the keyboard, palm rest and display panel, do so gently without using excessive pressure.
This function does not guarantee that the hard disk drive will not be damaged. TOSHIBA HDD Protection cannot be used in models that are equipped with SSD. When vibration is detected, a message will be displayed on the screen, and the icon in the Taskbar notification area will change to the protection state.
Page 126
However, when the computer is used in a mobile environment or in other unstable conditions, setting the detection level to 3 could result in frequent execution of TOSHIBA HDD Protection, which will slow Hard Disk Drive reading and writing. Set a lower detection level when the speed of Hard Disk Drive reading and writing is a priority.
Qosmio F60 Series Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.
Starting the USB Sleep and Charge Utility To start the utility, click Start -> All Programs -> TOSHIBA -> Utilities -> USB Sleep and Charge. Enabling USB Sleep and Charge This utility can be used to enable and disable the USB Sleep and Charge function.
Qosmio F60 Series Power supply mode settings Your PC has multiple charging modes so that many different USB devices can be supported for USB Sleep and Charge function. Typical Mode (Default) is suitable for a wide range of digital audio players.
Qosmio F60 Series Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.
Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 133
Qosmio F60 Series Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode. Output: Pressing FN + F5 changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an “F Number” key. To start the TOSHIBA Accessibility utility, click Start -> All Programs ->...
This key has the same function as the secondary (right) mouse button. Desktop-style Keyboard The Qosmio F60 Series comes with a “desktop-style” keyboard built into it. This means it is full-sized and features a full set of numeric function keys (also known as calculator keys) on the right-hand side.
Qosmio F60 Series Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.
Qosmio F60 Series Power conditions continued Power on Power off (no operation) AC adaptor Battery charge is • Operates above low battery • LED: Battery off connected trigger point DC IN off Battery charge is • Operates below low battery •...
Qosmio F60 Series DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: White Indicates the AC adaptor is connected and is correctly supplying power to the computer.
Qosmio F60 Series Battery This section explains battery types, use, recharging methods and handling. Battery types The computer has two different types of batteries. Battery pack When the AC adaptor is not connected, the computer’s main power source is a removable lithium ion battery pack, also referred to in this manual as the main battery.
TOSHIBA as replacements. The computer’s RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
- the Battery indicator will glow orange while the battery is being charged. Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Time Refer to User’s Manual about Charging time.
Qosmio F60 Series Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Taskbar Via the Battery Status in the Windows Mobility Center window You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
Qosmio F60 Series Retaining data with power off Refer to User’s Manual about Retention time. Extending battery life To maximize the life of your battery packs: At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Qosmio F60 Series Do not remove the battery pack while the computer is in Sleep Mode. Data is stored in RAM, so if the computer loses power it could be lost. In Hibernation Mode, data will be lost if you remove the battery pack or disconnect the AC adaptor before the save is completed.
Qosmio F60 Series 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2). 1. Battery pack 2. Battery release latch Figure 6-2 Releasing the battery pack (2) Installing the battery pack...
Windows password. User Password To start the utility, point to or click the following items: Start -> All Programs -> TOSHIBA -> Utilities -> Password Utility User Password field Set (button) Click this button to register a password of up to 50 characters. After a password is set, you will be prompted to enter it when you start the computer.
Qosmio F60 Series If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible for any loss of any data, any loss of use or access to your HDD, or for any other losses to you or any other person or organization that result from the loss of access to your HDD.
Qosmio F60 Series Power-up modes The computer has three different power-up modes as follows: Shut Down Mode: The computer will shut down without saving data - in view of this you must always save your work before you turn the computer off.
Accessing HW Setup To run the HW Setup program, click Start -> All Programs -> TOSHIBA -> Utilities -> HWSetup. HW Setup window The HW Setup window contains a number of tabs (General, Display, Boot Priority, Keyboard, CPU, LAN, SATA, USB Button Setting and Illumination) to allow specific functions of the computer to be configured.
Qosmio F60 Series Display This tab is supported with some models. The tab lets you customize your computer’s display settings for either the internal display or an external monitor. Power On Display This tab allows you to select the display to be used when the computer is started.
Page 153
Qosmio F60 Series You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB floppy diskette drive Selects the network. Selects the built-in hard disk drive.
Page 154
Qosmio F60 Series Sets the USB memory to be the equivalent of a floppy diskette drive. With this setting, the USB memory device can be used to start the computer as though it were a floppy diskette based on the floppy diskette drive settings within the Boot Priority option detailed previously.
Page 155
Qosmio F60 Series Wake-up on LAN This feature lets the computer’s power be turned on from shudown when it receives a wake-up packet (Magic packet) from the LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.
Page 156
Qosmio F60 Series SATA eSATA This feature allows you to set conditions of eSATA. Enables the eSATA port (Default). Enabled Disables the eSATA port in order to save power. Disabled SATA Interface setting This feature allows you to set SATA interface setting.
Qosmio F60 Series Button Setting Function Button This feature allows you to set conditions of the front operation panel. Enables the front operation panel (Default). Enabled Disables the front operation panel. Disabled Function Button Beep Use this option to enable or disable sound of the front operation panel.
Qosmio F60 Series Chapter 8 AV functions This chapter explains how to use the AV functions. The state where Windows 7 is active is referred to as Windows mode. Media Center This section describes the Media Center. You can record TV programs and pictures/movies from external input devices using the TV tuner.
Qosmio F60 Series Front operation panel This section describes the panels of the front operation panel in Windows mode. Only touch the panels with your fingers. Do not press the panels too strongly, or use a ballpoint pen or any other pointed object to touch the panels.
You can update and assign other applications to the operation panels using the TOSHIBA Button Support utility. To open TOSHIBA Button Support, please follow one of the methods listed below: Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist, and then click the OPTIMIZE tab in the TOSHIBA Assist window.
Page 162
Qosmio F60 Series The TOSHIBA Button Support dialog box will appear. Follow the following steps to assign a function to the selected panel. 1. In the Button Name list, select one of the following panel name such as eco, Programmable button, CD/DVD Play/Pause, Mute.
Page 163
If CD/DVD Play/Pause is selected in Step1 of the TOSHIBA Button Support section, the TOSHIBA Button Support dialog box will be displayed as shown below: 1. Click Advanced. The following dialog box will appear. 2. Select either CD/DVD Play/Pause (default) or Play/Pause.
Qosmio F60 Series Remote controller A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. Some models are included with a Full size remote controller. Please refer to...
Page 165
Qosmio F60 Series Full size remote controller 1. Play 2. Pause 3. Access indicator 4. Power 5. Stop 6. Fast Forward 7. Skip 8. Start 9. More info 10. OK 11. Mute 12. Channel/Page 13. Live TV 14. DVD Menu 15.
Page 166
Qosmio F60 Series 1. Play 2. Pause 3. Access indicator 4. Power 5. Stop 6. Fast Forward 7. Skip 8. Start 9. More info 10. OK 11. Mute 12. Channel/Page 13. Live TV 14. DVD Menu 15. Numbers 16. Enter 17.
Page 167
Qosmio F60 Series Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control panel ->...
Page 168
Qosmio F60 Series Volume + Increases the volume while watching TV, viewing DVD’s or replaying CD’s. Volume - Decreases the volume while watching TV, viewing DVD’s or replaying CD’s. Start Opens Media Center to the main window. Channel/Page up(+) Changes the TV channel or moves a page up and down(-) and down, depending on the available options.
Qosmio F60 Series Using the remote controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location. The remote controller is designed specifically for this computer. Some application programs may not support remote control functions.
Qosmio F60 Series Installing/Removing batteries Be sure to install the provided AA type batteries before using the remote controller. The procedures for installing and removing the batteries vary depending on the type of the remote controller. Check the type and then install or remove the batteries as instructed.
Qosmio F60 Series Full size remote controller Type of battery that can be used for the Full size remote controller When the batteries shipped with the remote controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries.
Qosmio F60 Series Replacing the batteries When the batteries in the Full size remote controller reach the end of their life, the Full size remote controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Qosmio F60 Series Chapter 9 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Qosmio F60 Series Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem: Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.
Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: The computer stops and does not proceed to display information or messages except for the TOSHIBA logo.
Qosmio F60 Series Overheating power down If the processor’s temperature reaches an unacceptably high level with either setting, the computer will automatically shuts down to prevent any damage - in this instance all unsaved data in memory will be lost.
Page 178
Qosmio F60 Series Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter 6, Power and Power-Up Modes, for more information on these indicators, together with general battery operation.
Qosmio F60 Series Real Time Clock Problem Procedure The following The charge in the Real Time Clock (RTC) battery message is has run out - you will need to set the date and Displayed on the time in the BIOS setup application by using the...
Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
Qosmio F60 Series Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utility to check the condition of your files and the hard disk drive.
Page 182
Cannot write correctly If you have trouble in writing, make sure you have taken the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard while writing. Use only the software supplied with the computer for recording.
Qosmio F60 Series DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access Make sure the drive’s disc tray is securely a CD/DVD in the closed. drive Press gently until it clicks into place.
Qosmio F60 Series USB floppy diskette drive The USB floppy diskette drive is available only as an option. For further information, please refer to Chapter 4, Operating Basics. Problem Procedure Drive does not Check the connection between the computer and operate the drive to ensure that it is properly attached.
Qosmio F60 Series Memory Stick/Memory Stick Duo/Memory Stick PRO/Memory Stick PRO Duo For further information, please refer to Chapter 3, Hardware, Utilities and Options. Problem Procedure Memory Stick/ Remove the Memory Stick/Memory Stick Duo/ Memory Stick Duo/ Memory Stick PRO/Memory Stick PRO Duo from...
Qosmio F60 Series MultiMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options. Problem Procedure MultiMediaCard error Remove the MultiMediaCard from the computer occurs and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your MultiMediaCard for further information.
Qosmio F60 Series Pointing device If you are using a USB mouse, you should also refer to both the device section in this chapter, and the documentation supplied with your mouse. Touch Pad Problem Procedure On-screen pointer In this instance the system might be busy -...
Qosmio F60 Series Problem Procedure The reaction of Touch Adjust the touch sensitivity. pad is either too 1. Click Start -> Control Panel -> Hardware sensitive or not and Sound -> Mouse (under “Devices and sensitive enough. Printers”). 2. Within the Mouse Properties window, click the Device Settings tab.
USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
Sleep and Charge disabled. function. Select the “Enable USB Sleep and Charge” check box in the TOSHIBA Sleep and Charge utility to enable this function. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.
Qosmio F60 Series Problem Procedure External devices Some external devices may not work when connected to the connected to a compatible port if the USB Sleep compatible ports do and Charge function is enabled. not work when Reconnect the external device after turning the connected to a computer ON.
Page 192
Qosmio F60 Series Additional memory module Please also refer to Chapter 3, Hardware, Utilities and Options, for further information on installing and removing memory modules. Problem Procedure If there is a memory In the event the Power indicator flashes when...
Page 193
Qosmio F60 Series Sound system In addition to the information in this section, please also refer to the documentation supplied with your audio device. Problem Procedure No sound is heard Adjust the volume control dial. Turn the dial clockwise to increase the volume and turn it counter-clockwise to decrease the volume.
Page 194
Qosmio F60 Series Problem Procedure No display Try adjusting the contrast and brightness controls on the external monitor. Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display panel only.
Qosmio F60 Series Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s Wireless Wireless LAN communication function is turned on.
Recovery Discs section in Chapter 1, Getting Started. You will be directed to select “Restore Original Factory Image” from the drop-down menu. If you have not created “Recovery Media”, please contact TOSHIBA support for assistance. 9-24 User’s Manual...
- they are your best resource for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the location listed in the enclosed warranty booklet or visit www.toshiba-europe.com on the Internet.
Qosmio F60 Series Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Refer to User’s Manual about Size. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 65°C 10% to 90% (149°F)
Qosmio F60 Series Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel’s increased resolution, lines may appear broken in when displaying images in full-screen text mode.
Qosmio F60 Series Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card IEEE 802.11 Standard for Wireless LANs...
Subject to the radio regulations that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/ regions.
Page 205
Qosmio F60 Series 2462 2467* 2472* *1 Factory-set default channels *2 The approved channels on using are different at each country or region. When using these channels in any country or region, refer to the addendum sheet which is Approved Countries/Regions for use. The channel...
Page 206
Qosmio F60 Series 5520* 5540* 5560* 5580* 5600* 5620* 5640* 5660* 5680* 5700* 5745* 5765* 5785* 5805* 5825* * The approved channels on using are different at each country or region. When using these channels in any country or region, refer to the addendum sheet which is Approved Countries/Regions for use.
Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Qosmio F60 Series Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following...
Page 210
Qosmio F60 Series In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S.
BIOS and Hard Disk Drive to gain access to the system. To set permissions and limits for the TOSHIBA Anti-theft Protection Timer please use the TOSHIBA Password Utility. The settings can only be activated or modified by a user with supervisor authority.
Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.
Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started using the following methods: Click Start -> All Programs -> TOSHIBA -> Utilities -> PC Health Monitor. Click the icon ( ) in the notification area, then click the “Enable PC Health Monitor...”...
Page 215
Qosmio F60 Series 5. Slip your finger under a notch at the end of the keyboard brace and lift up to release latches and remove the keyboard brace. 1. Keyboard barce Figure G-1 Removing the keyboard brace 6. Remove three screws and the metal fittings securing the keyboard.
Page 216
Qosmio F60 Series 1.Keyboard Figure G-3 Rotating the keyboard 8. Lift the plastic film and clean the cooling module using a vacuum cleaner or other cleaning tool. 1. Plastic film Figure G-4 Removing the Fan hood 9. Insert the tabs on the front of the keyboard into the corresponding notches on the computer and place the keyboard down.
Qosmio F60 Series Appendix H Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Qosmio F60 Series Hard Disk Drive (HDD) Capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.
Qosmio F60 Series Images All images are simulated for purposes of illustration. LCD Brightness and Eye Stain Your display panel has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: Fill in the TOSHIBA Theft Registration form (or a copy of it) below. Attach a copy of your receipt showing where your computer was purchased.
Page 222
Qosmio F60 Series TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite A500) Model number: (e.g. PSL50EYXT) Serial number: (e.g.
Page 223
Qosmio F60 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American Standard Code for Information Interchange...
Page 224
Qosmio F60 Series IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect...
Page 225
Qosmio F60 Series application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols.
Page 226
Qosmio F60 Series cache memory: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also L1 cache, L2 cache.
Page 227
Qosmio F60 Series components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result.
Page 228
Qosmio F60 Series disable: To turn a computer option off. See also enable. Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory.
Page 229
(FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
Page 230
FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
Page 231
Qosmio F60 Series interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information. 3) The point of contact between user, the computer, and the program, for example, the keyboard or a menu.
Page 232
Qosmio F60 Series main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. memory: Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed.
Page 233
Qosmio F60 Series OCR: Optical Character Recognition (reader). A technique or device that uses laser or visible light to identify characters and input them into a storage device. online state: A functional state of a peripheral device when it is ready to receive or transmit data.
Page 234
The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
Page 235
TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
Page 236
Qosmio F60 Series volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. warm start: Restarting or resetting a computer without turning it off. Wi-Fi: A registered trademark term of the Wi-Fi Alliance that stands for...
Page 237
External monitor, 2-2, 3-6, 3-31 Battery Packs, 3-27 problems, 9-21 Bluetooth, 3-8, 4-34 Bluetooth Stack for Windows by FN + 1 (TOSHIBA Zooming Utility reduce), Toshiba, 3-13 problems, 9-23 FN + 2 (TOSHIBA Zooming Utility enlarge), Boot Priority, 7-2 Bridge media slot, 2-1, 3-7, 3-18...
Page 238
Qosmio F60 Series FN + F7 (Brightness Up), 5-3 FN + F8 (Wireless), 5-3 Indicators, 2-9 FN + F9 (Touch Pad), 5-3 Battery, 2-9, 6-2 FN + space (Zoom), 5-4 Bridge media slot, 2-9 Front operation panel, 8-2 DC IN, 2-9...
Page 239
Qosmio F60 Series Modem, 4-33 Hard disk drive, 9-8 Moving the computer, 4-38 Hardware and system checklist, 9-3 MultiMediaCard HDMI monitor output function, 9-23 inserting, 3-21 Infrared receiver window, 9-14 problems, 9-14 Internal display panel, 9-8 removing, 3-22 Keyboard, 9-7...
Page 240
USB FDD Kit, 3-28 note, 3-19 USB floppy diskette drive problems, 9-12 problems, 9-12 removing, 3-22 Using the TOSHIBA USB Sleep and Security lock, 3-34 Charge Utility, 4-41 Sleep Mode, 3-11 Using WinDVD BD for TOSHIBA, 4-26 setting, 1-8 System automatic, 3-9...