Table of Contents
Advertisement
a USB floppy diskette drive by setting the USB-FDD Legacy Emulation
item to Enabled.
Enabled
Disabled
SATA
eSATA
This feature allows you to set conditions for SATA.
Enabled
Disabled
SATA Interface setting
This feature allows you to set SATA interface setting.
Performance
Battery life
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shudown when it
receives a wake-up packet (Magic packet) from the LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
■
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
■
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "Allow the device to wake the computer" check box within the LAN
Device properties (this feature does not effect the Wake-up on LAN
from sleep or hibernation).
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
User's Manual
Enables the USB floppy diskette drive legacy
emulation function (Default).
Disables the USB floppy diskette drive legacy
emulation function.
Enables the eSATA port (Default).
Disables the eSATA port in order to save power.
Let HDD/SSD work with maximum performance.
(Default)
Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance down.
PORTÉGÉ/TECRA R700 Series
7-5
- Quick Links:
- Equipment Checklist
Hide quick links:
Advertisement
Chapters
Table of Contents
