Installing A Memory Module - Toshiba TECRA R700 User Manual

Table of Contents

■

You should place a mat beneath the computer in order to prevent the

computer's lid from becoming scratched or damaged when you are

installing/replacing the memory module. In this instance you should

avoid mats that are made of materials that hold or generate static

electricity.

■

When installing or removing a memory module, you must ensure that

you do not touch any other internal areas of the computer.

■

Insert the two memory modules into Slot A and Slot B respectively. The

computer will operate in dual channel mode. You can access the

inserted memory modules efficiently in dual channel.

Use only memory modules approved by TOSHIBA.

Do not try to install or remove a memory module under the following

conditions.

■

The computer is turned on.

■

The computer was shut down in either Sleep or Hibernation Mode.

■

Wake-up on LAN is enabled.

■

The wireless communication functionalities are turned on.

■

USB Sleep and Charge function is enabled.

Be careful not to let screws or other foreign matter fall into the computer. It

could cause malfunction or electric shock.

Additional memory module is a precision electronic component that may be

fatally damaged by static electricity. Since the human body can carry static

electricity, it is important that you discharge yourself before touching or

installing any additional memory modules. To discharge your body's static

electricity, simply touch any metal close to you with bare hands.

Use a point size 0 Phillips screwdriver to remove and fasten the screws -

the use of an incorrect screwdriver can damage the screw heads.