Table of Contents
Advertisement
Chapter 5 Network Scanner Utility CD-ROM
4
Select the copier's name to use as a network scanner and click the Next> button. The name
displayed are based upon the Machine Name set during the installation of the network
scanning function. See Page 7 "E-mail/Network Scanning Setup Web page" to change this
name.
When Windows 98 or Windows NT 4.0 with Service Pack 4 or later is used, the network connected copier
is automatically detected. The automatic detection is not available when Windows 95 is used ( the "Auto
Detect" button is disabled being grayed out.) Click on the New button and enter the IP address (For
checking the IP address, refer to the part of "Identifying the Copier's Network Address" on page 2.) of the
copier to be used as a network scanner. Even when you use Windows 95, the automatic detection will be
available if you update Winsock2 (Windows Socket 2). (See page 20 of the Operation Manual for the AR-
PB2A Printer Expansion Kit for the additional information about how to update it.)
The setting in the above steps 3 and 4 can be modified later. For the modification, click the Windows Start
button, then Program and then Sharpdesk and finally Network Scanner Tool Configuration. For the
detailed information about such settings, refer the on-line Help or the Network Scanner Tool User's Guide
contained in the supplied CD-ROM.
31
Advertisement
Table of Contents
