Configuring Basic Settings - Cisco QuickVPN - PC Administration Manual
Wireless-n gigabit security router with vpn
Hide thumbs
Also See for QuickVPN - PC:
- Administration manual (244 pages) ,
- User manual (112 pages) ,
- Administration manual (107 pages)
Table of Contents
Advertisement
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
STEP 1
STEP 2
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Configuring Basic Settings
The Firewall > Basic Settings window displays the firewall-specific settings of the
router.
To configure basic firewall settings for the router, follow these steps:
Click Firewall > Basic Settings.
Configure the basic firewall settings:
•
Firewall—Enable this feature to perform deep packet inspection on all the
traffic going through the router and drop the packets that do not follow the
pre-defined protocol behavior. The default is Enable.
•
DoS Protection—When enabled, the router prevents DoS (Denial of
Service) attacks coming in from the Internet. DoS attacks consume most of
the router's resources and as a result they can prevent legitimate traffic from
passing through the router. The default Is Enable.
•
Block WAN Request—When enabled, the router ignores PING Request from
the Internet so it seems to be hidden. The default is Enable.
•
Remote Management—When enabled, the router allows the web-based
utility to be accessed from the Internet. The default is Disable.
5
97
Advertisement
Table of Contents
