Table of Contents
Advertisement
Chapter 32
Configuring QoS
To return to the default map, use the no mls qos policed-dscp global configuration command.
This example shows how to map DSCP 50 to 57 to a marked-down DSCP value of 0:
Switch(config)# mls qos map policed-dscp 50 51 52 53 54 55 56 57 to 0
Switch(config)# end
Switch# show mls qos maps policed-dscp
Policed-dscp map:
In this policed-DSCP map, the marked-down DSCP values are shown in the body of the matrix. The d1
Note
column specifies the most-significant digit of the original DSCP; the d2 row specifies the
least-significant digit of the original DSCP. The intersection of the d1 and d2 values provides the
marked-down value. For example, an original DSCP value of 53 corresponds to a marked-down DSCP
value of 0.
Configuring the DSCP-to-CoS Map
You use the DSCP-to-CoS map to generate a CoS value, which is used to select one of the four egress
queues.
Table 32-14
Table 32-14
DSCP Value
0–7
8–15
16–23
24–31
32–39
40–47
48–55
56–63
If these values are not appropriate for your network, you need to modify them.
OL-8915-03
d1 :
d2 0
1
2
3
4
---------------------------------------
0 :
00 01 02 03 04 05 06 07 08 09
1 :
10 11 12 13 14 15 16 17 18 19
2 :
20 21 22 23 24 25 26 27 28 29
3 :
30 31 32 33 34 35 36 37 38 39
4 :
40 41 42 43 44 45 46 47 48 49
5 :
00 00 00 00 00 00 00 00 58 59
6 :
60 61 62 63
shows the default DSCP-to-CoS map.
Default DSCP-to-CoS Map
CoS Value
0
1
2
3
4
5
6
7
5
6
7
8
9
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Configuring Standard QoS
32-63
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
