Table of Contents
Advertisement
Chapter 1
Overview
DHCP client is enabled, the DHCP server is enabled (only if the device acting as a DHCP server is
•
configured and is enabled), and the DHCP relay agent is enabled (only if the device is acting as a
DHCP relay agent is configured and is enabled). For more information, see
the Switch IP Address and Default Gateway,"
Source Guard."
No passwords are defined. For more information, see
•
•
System name and prompt is Switch. For more information, see
Switch."
•
NTP is enabled. For more information, see
•
DNS is enabled. For more information, see
TACACS+ is disabled. For more information, see
•
Authentication."
RADIUS is disabled. For more information, see
•
Authentication."
•
The standard HTTP server and Secure Socket Layer (SSL) HTTPS server are both enabled. For more
information, see
IEEE 802.1x is disabled. For more information, see
•
Port-Based Authentication."
•
Port parameters
–
–
–
–
–
•
No Smartports macros are defined. For more information, see
Macros."
•
VLANs
–
–
–
–
–
–
–
OL-8915-03
Chapter 7, "Configuring Switch-Based Authentication."
Operating mode is Layer 2 (switchport). For more information, see
Interface Characteristics."
Interface speed and duplex mode is autonegotiate. For more information, see
"Configuring Interface Characteristics."
Auto-MDIX is enabled. For more information, see
Characteristics."
Flow control is off. For more information, see
Characteristics."
PortFast is enabled on the sixteen internal Gigabit Ethernet ports. For more information, see
Chapter 18, "Configuring Optional Spanning-Tree Features."
Default VLAN is VLAN 1. For more information, see
VLAN trunking setting is dynamic auto (DTP). For more information, see
"Configuring VLANs."
Trunk encapsulation is negotiate. For more information, see
VLANs."
VTP mode is server. For more information, see
VTP version is Version 1. For more information, see
No private VLANs are configured. For more information, see
VLANs."
Voice VLAN is disabled. For more information, see
Default Settings After Initial Switch Configuration
and
Chapter 20, "Configuring DHCP Features and IP
Chapter 5, "Administering the Switch."
Chapter 5, "Administering the Switch."
Chapter 5, "Administering the Switch."
Chapter 7, "Configuring Switch-Based
Chapter 7, "Configuring Switch-Based
Chapter 8, "Configuring IEEE 802.1x
Chapter 9, "Configuring Interface
Chapter 9, "Configuring Interface
Chapter 12, "Configuring VTP."
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
Chapter 3, "Assigning
Chapter 5, "Administering the
Chapter 9, "Configuring
Chapter 9,
Chapter 10, "Configuring Smartports
Chapter 11, "Configuring VLANs."
Chapter 11,
Chapter 11, "Configuring
Chapter 12, "Configuring VTP."
Chapter 14, "Configuring Private
Chapter 13, "Configuring Voice VLAN."
1-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
