Table of Contents
Advertisement
Available languages
Available languages
6.3 FlexiBridge Big Bridge mode
To activate the mode touch
the correct mode indicator . This mode
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the display shows
zone switches off.
Incorrect cookware position:
34
ENGLISH
until you see
and after 2 minutes the
6.4 FlexiBridge Max Bridge mode
To activate the mode touch
the correct mode indicator . This mode
connects all sections into one cooking zone.
To set the heat setting use any of the two
control bars on the left side.
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three sections
the display shows
zone switches off.
Incorrect cookware position:
until you see
and after 2 minutes the
Advertisement
Chapters
Table of Contents
