Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..26 Table of Contents 6.8.1 Auxiliary Functions..... 27 1 Safety Instructions ....... 6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........28 Electrical Safety......
1 Safety Instructions This section includes the safety – Ranches, instructions necessary to pre- – By customers of hotels, mo- vent the risk of personal injury or tels and other accommoda- material damage. tion facilities, Our company shall not be held –...
• Do not forget to close the load- • Do not use an extension cord, ing door when leaving the multi-plug or adaptor to oper- room where the product is loc- ate your product. ated. Children and pets may • The plug shall be easily ac- get locked inside and drown.
your product falls on you. Do • Do not install the product at not hit and drop the product locations where the temperat- while carrying. ure drops below 0 ºC. • Carry the product in an upright • Do not place the product on a position.
be minimum 0.1 MPa (1 bar) Operational Safety and maximum 1MPa (10 bars). • When you are using the appli- 10 to 80 litres of water should ances, use only detergents, be running from the tap in a softeners and supplements minute in order for the product suitable for washing ma- to function properly.
• Make sure pets do not climb • Take the following precautions inside the product. Check in- to prevent formation of biofilm side the product before use. and malodours: • Do not force open the locked – Make sure the room where loading door.
• There may be detergent • The temperature in the ma- residues in the detergent chine may rise up to 90ºC. drawer when you open it for Clean the filter after the water cleaning. in the machine cools down in •...
3 Technical Specifications Manufacturer’s name or commercial brand Beko BM3WFSU48415WB Model name 7004840003 Rated Capacity (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) 54,6 Single Water inlet / Double Water inlet + / -...
4 Installation • Total weight of the washing machine and Please read the “Safety Instruc- the dryer -with full load- when they are tions” section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatic- on a solid and flat floor that has suffi- ally detects the amount of laundry...
• Cover B and the Cap are optional. If avail- NOTICE able, attach cover B and the Cap. Keep the transportation safety bolts in a safe place to reuse when Cover B the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure.
4.5 Connecting the Drain Hose to leaks, always secure the connection between the extension hose and the the Drain draining hose of the product with a suit- 1. Attach the end of the drain hose directly able clamp so that it does not come off to waste water drain, washbasin or and cause leaks.
• If the current supply to the fuse or stallation”. To prepare the product for breaker in the house is less than 16 washing laundry, perform first operation in Amps, have a qualified electrician install Drum Cleaning programme. If this pro- a 16 amp supply.
5.3 Tips for Energy and Water Sav- Follow the instructions in “Pro- gramme and consumption table”. When the appliances is overloaded Following information will help you use the product’s washing performance will product in an ecological and energy/water- drop. Moreover, noise and vibration efficient manner.
Page 16
• If you are using a programme without Adjusting the Detergent Amount pre-washing, do not put detergent in the The amount of detergent depends on the pre-wash compartment (compartment amount of laundry, how soiled they are and no. “1”). the water hardness. •...
Use of Gel and Tablet Detergents Using Bleach and Decolourants • If the detergent is fluid and there is no li- • Select a programme with pre-washing quid detergent compartment in your and add bleach at the start of pre-wash- product, place the gel detergent in the ing.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration Information 4 Door Lock Is Engaged Symbol 5 Programme Follow-up Indicator 6 No Water Indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Auxiliary Function Indicators 2 10 Child Lock Enabled Symbol 11 Auxiliary Function Indicators 1 12 No Spin Indicator...
Page 22
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection quantities (for example, ½ of capacity or less), the duration of the program stages 1. Determine the programme suitable for may be automatically shortened. In this the type, quantity and soiling level of the case, energy and water consumption are laundry in accordance with "Programme further reduced.
Page 24
• The programme has been tested by the partment with the detergent. In this way, British Allergy Foundation (Allergy UK) at you can achieve the performance you get a temperature of 60°C and approved for in a normal wash in a much shorter time. hygiene and allergen removal effective- Your shirts will last longer.
You can find the following groups of This is not a washing program. This stains that can be selected with the is a maintenance program. “fast/intense” setting key: Do not run this program with any- When “busy” is selected; thing inside the machine. When you try to start, the machine automatic- Sweat, collar dirt, food, mayonnaise, salad ally detects that there is a load in-...
You can change the spin speed after the If you scroll to cold wash option washing starts if the washing steps allow it. and press Temperature Adjustment Changes cannot be made if the steps do button again, the recommended not allow it. maximum temperature for the se- lected programme appears on the Rinse Hold...
Thanks to optimized wash steps, high When an auxiliary function button mechanical mobility and optimum water that cannot be selected with the consumption, high wash performance is current programme is pressed, the achieved despite the shorter duration. washing machine will make a warn- ing sound.
the WaterMode key once for programs To deactivate the child lock: where the water saving auxiliary function Press and hold the corresponding auxiliary cannot be selected. function button for 3 seconds. The child This function allows the machine to per- Lock icon disappears when the "3-2-1"...
3. Loading door is locked. The door lock symbol appears on the display after the loading door is locked. 4. Programme follow-up indicator lights on the display will show the current pro- If you want to cancel End Time function, gramme step.
4. If the loading door does not open then repeat the previous step. Changing the programme selection after programme has started: The programme change is allowed when the current programme is running unless the Child Lock is enabled. This action will cancel the current programme.
6.14 End of Programme If you turn the programme selection knob when the Child Lock is en- End symbol appears on the display when abled, the programme will not be the programme is completed. cancelled. You should cancel the If you do not press any button for 10 Child Lock first.
Foreign metal substances will cause rust 3. Take out the filters on the flat ends of stains in the drum. Clean the stains on the the water intake hoses together with the drum surface by using cleaning agents for gaskets and clean thoroughly under run- stainless steel.
• When the pump filter starts leaking water loosen it by turning (opposite clockwise). Fill the running water to the container you placed in front of the filter. Keep a cloth ready to clean the water that may spill. • Completely turn and remove the pump fil- ter when the water in the product leaks out.
Page 34
• Laundry quantity in the product is too and pull down the emergency handle po- little. >>> Add more laundry to the sitioned at the rear side of the said cap. product. See Loading Door Lock [} 29] • Excessive laundry is loaded in the Washing takes longer than specified in product.
Page 35
Programme duration does not count- Washing performance is poor: Stains down. (*) persist or the laundry is not whitened. (**) • There is unbalanced load in the product. • Insufficient amount of detergent is used. >>> Automatic unbalanced load detection >>>...
Page 36
• A higher temperature was selected. >>> softener step. Wash and clean the drawer Select the proper programme and tem- with hot water. Put the detergent in the perature according to the type and soiling correct compartment. degree of the laundry. •...
Some (simple) failures can be adequately repairs by professional repairers (who handled by the end-user without any safety are not authorized by Beko ) shall void issue or unsafe use arising, provided that the guarantee. they are carried out within the limits and in...
Page 38
By way of example, but not limited to, the port.beko.com , and will void the warranty following repairs must be addressed to au- of the product. thorized professional repairers or re- gistered professional repairers: motor,...
Page 39
When the appliance is turned off, pressing 1 and 2 auxiliary function buttons are pressed for a long time, a 3-2-1 countdown, and the total washing cycles completed on the appliance is displayed. After the total washing cycle is displayed, the failure codes, if any, are displayed. Check the information on the screen through the table below.