hit counter script
Zanussi ZDS 2010 User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Dishwasher
  5. ZDS 2010
  6. User manual
Zanussi ZDS 2010 User Manual

Zanussi ZDS 2010 User Manual

Hide thumbs Also See for ZDS 2010:
Table of Contents

Advertisement

Quick Links

Download this manual
User manual
2
EN
Dishwasher
ZDS 2010

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZDS 2010

Summary of Contents for Zanussi ZDS 2010

  • Page 1 User manual Dishwasher ZDS 2010...

  • Page 2: Table Of Contents

    Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Setting and starting a washing programme _ _ _ _ 10 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if…...

  • Page 3: Control Panel

    • Do not change the specifications or modify this prod- Contact your local Service Force Centre. uct. Risk of injury and damage to the appliance. • Do not drill into the sides of the appliance to prevent • Do not use the appliance: damage to hydraulic and electrical components.

  • Page 4: Washing Programmes

    Programme knob and on/off indicator light – The on/off indicator light goes off (position OFF). • To set a washing programme, turn the programme Delay start button knob clockwise or anticlockwise. The programme Use the delay start button to delay the start of the washing marker on the programme knob must agree with one programme with an interval of 3 hours.

  • Page 5: Use Of The Appliance

    Programme Duration (in minutes) Energy (in kWh) Water (in litres) Quick 65° A 30' Economy 50° 120 - 130 0,8 - 0,9 12 - 13 Prewash The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes can change these values.

  • Page 6: Use Of Dishwasher Salt

    Water hardness Water hardness setting °dH °TH mmol/l Clarke manually electronically 51 - 70 91 - 125 9,1 - 12,5 64 - 88 43 - 50 76 - 90 7,6 - 9,0 53 - 63 37 - 42 65 - 75 6,5 - 7,5 46 - 52 29 - 36...

  • Page 7: Use Of Rinse Aid

    It is normal that water overflows from the salt con- tainer when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Salt which stays on the tank for a while drills the tank. It is recommended to start a wash- ing programme immediately after you fill the salt con- tainer.

  • Page 8: Loading Cutlery And Dishes

    Adjusting the dosage of rinse aid Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, The rinse aid dial is set at liquid detergent). There is a risk of damage to the the factory at position 4. appliance.

  • Page 9: Use Of Detergent

    Arrange the items to let For longer items, fold the Do these steps to move the upper basket to the upper or water touch all surfaces. cup racks up. lower position: Adjustment of the height of the upper basket 1. Move the front runner stops (A) out. If you put large plates in the lower basket, first move the 2.

  • Page 10: Setting And Starting A Washing Programme

    tainers. In this condition the rinse aid indicator light stays on when the appliance is switched on. 1. Do a check if these tablets are applicable for the local water hardness. Refer to the instructions from the manufacturer. 2. Select the lowest setting for the water hardness and rinse aid dosage.

  • Page 11: Care And Cleaning

    • The appliance stops automatically. Do not open the door during the countdown to pre- vent interruption of the countdown. When you close • The end indicator light comes on. the door again, the countdown continues from the point For better drying results, keep the door ajar for some mi- of interruption.

  • Page 12: What To Do If

    External cleaning If not possible, empty the appliance and close the door. Clean the external surfaces of the appliance and control Disconnect the water inlet hose and remove water from panel with a damp soft cloth. Only use neutral detergents. the water inlet hose.

  • Page 13: Technical Data

    Fault code and malfunction Possible cause and solution The programme does not start • The appliance door is not closed. Close the door. • Mains plug is not connected in. Put in the mains. • The fuse has blown out in the household fuse box. Replace the fuse.

  • Page 14: Environment Concerns

    Depth cm 60,5 Electrical connection - Voltage - Information on the electrical connection is given on the rating plate on the Overall power - Fuse inner edge of the dishwasher door. Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Capacity Place settings...

  • Page 15: Water Connection

    Install the appliance worktop to the appliance if you want to use the dishwasher as a freestanding appliance. The plinth on freestanding appliance is not adjustable. Adjusting the level of the appliance Make sure that the appliance is level to close and seal the door correctly.

  • Page 16: Electrical Connection

    Electrical connection Warning! The manufacturer is not responsible if Do not replace the mains cable yourself. Contact the you do not follow these safety precautions. Service Force Centre. This appliance needs to be earthed according to safety Make sure that the mains plug is accessible after precautions.
  • Page 20 To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi.co.uk www.zanussi.com...

This manual is also suitable for:

Zds2010s

Table of Contents