Protection against flooding Service and spare parts Customer Care Department Guarantee conditions Zanussi Service Force Hints for test centres Technical specifications Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
Description of the appliance Levelling spacers Upper basket stop Upper spray arm Salt container Large filter Detergent dispenser Control panel Rating plate Rinse aid dispenser 10. Central filter 11. Lower spray arm 12. Upper basket 13. "SID" detergent dispenser IN84 The control panel 7 8 9 On/Off indicator light...
Page 5
Half load push button Programme start push button By pressing this push button, washing can be This is the last push button to press after confined to a single basket. having set the programme and closed the door. The indicator light corresponding to the selected It starts the programme.
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing. Short "instruction accepted" signal When any of the push buttons are pressed, a short audible signal informs you that the machine has accepted the instruction given. Long "programme run"...
Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes.
The cutlery basket Long bladed knives stored in an upright position are a potential hazard. These items should only be placed in the removable knife basket. Take care when loading or unloading sharp items such as knives. Removable knife basket Long and/or sharp items of cutlery such as carving knives must be placed horizontally in the removable knife basket, which is positioned at the rear of the...
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. If dishese are loaded in the upper basket, tilt them forwards. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces.
Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser.
Hints and tips To save energy Items not suitable for dishwashers Place dishes in the machine immediately after every meal and wait until the dishwasher is full before The following items should not be washed in washing. the dishwasher (unless they are sold as If necessary run the Rinse and Hold programme (see dishwasher proof): "Washing Programmes"...
Washing programmes Degree of soil Recommended quantity Programme Cycle of detergent and type of load description wash prewash 1 cold rinse Any. (to avoid food scraps from RINSE AND Partial load (to be completed sticking together). HOLD later in the day). Hot prewash Heavy soil.
Operating sequence Check the filters 8a. Setting and starting the programme without "delay Ensure they are clean and properly positioned (see "Maintenance and cleaning"). start" Press the "programme selector" push button until the required programme number Press the On/Off push button appears in the digital display.
Page 17
8b. Setting and starting the Empty the lower basket first and then the upper one; this will avoid water dripping programme with "delay start" from the upper basket onto the dishes in the lower one. Once a programme and required options have been selected to use DELAY proceed as follows: Press the DELAY push button.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
Check that the SID is not clogged with detergent residue. If necessary rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Fasten it back onto the support by turning it clockwise. Never use your dishwasher without the SID dispenser.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning: 08705 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Zanussi Service Force 08705 929 929 To contact your local Zanussi Service Centre telephone ORKNEY Corsie Domestics CHANNEL ISLANDS NORTH EAST (M65) 7 King Street Kirkwall GUERNSEY Guernsey Electricity GATESHEAD Unit 356a Orkney KW15 PO Box 4 (M39) Dukesway Court...
Page 24
Zanussi Service Force 08705 929 929 To contact your local Zanussi Service Centre telephone MIDLANDS LONDON & EAST ANGLIA SOUTH EAST BIRMINGHAM 66 Birch Road East, BECKENHAM 11 a Gardener Ind. Estate ASHFORD Unit 2 (M18) Wyrley Road Ind. Estate...
Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard EN 50242 Reference programme: Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage :...
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine.
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the CS13...
Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Building-in This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.
The furniture door plinth The door on this appliance is designed for the overlay of a door plinth having the following dimensions: Width: 596 mm Height: 50 mm (min) - 120 mm (max) Thickness: 20 mm max The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher II71...
Fitting the vapour protection Fit the adhesive protection foil onto the front part of the worktop; along the entire width. II21 Noise protection Adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted.
Page 32
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.