Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDSN653X1
Summary of Contents for Zanussi ZDSN653X1
- Page 1 User Manual GETTING STARTED? EASY. ZDSN653X1 EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by the •... -
Page 4: Internal Lighting
• This appliance is fitted with a 13 A mains plug. If INTERNAL LIGHTING it is necessary to change the mains plug fuse, WARNING! Risk of injury. use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only). WATER CONNECTION •... -
Page 5: Product Description
PRODUCT DESCRIPTION The graphics below is just a general product overview. For more detailed information, refer to other chapters and/or documents provided with the appliance. Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket... -
Page 6: Control Panel
CONTROL PANEL Display ECO programme button Indicators Programme buttons On/off button / Reset button Delay button INDICATORS Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Salt indicator. - Page 7 Degree of soil Programme Programme phases Type of load • Normal soil • Prewash • Crockery and cutlery • Wash 50 °C • Rinses • • • Prewash • Crockery, cutlery, pots and • Wash from 50 - 60 °C Auto pans •...
-
Page 8: Consumption Values
CONSUMPTION VALUES Water Energy Duration 1) 2) Programme (kWh) (min) / 9.9 0.821 / 0.835 / 240 8.2 - 11.2 0.67 - 1.08 120 - 170 Auto 9.2 - 11.2 0.96 - 1.08 160 min 9.1 - 11.1 1.01 - 1.13 90 min 9.4 - 11.4 0.57 - 0.69... -
Page 9: The Water Softener
• If the programme was not started, switch The higher the content of these minerals, the harder the appliance off and on. your water is. Water hardness is measured in • If the programme or delay countdown is equivalent scales. running, press and hold the on/off button The water softener should be adjusted according to for 3 seconds. -
Page 10: The Rinse Aid Empty Notification
1. Press once. Water softener level Amount of water (l) • The indicator continues to flash and the remaining indicators are off. • The display shows the current setting: e.g. = level 5. 2. Press repeatedly to change the setting. Each pressing of increases the level number. -
Page 11: Before First Use
CAUTION! If children have access to the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger. How to deactivate AirDry Make sure the appliance is in user mode. 1. Press three times. • The indicator continues to flash and the remaining indicators are off. -
Page 12: Daily Use
CAUTION! Water and salt can come CAUTION! Only use rinse aid out of the salt container when you fill designed specifically for dishwashers. it. After you fill the salt container, immediately start a programme to 1. Press the release button (D) to open the lid prevent corrosion. -
Page 13: Hints And Tips
The display shows the programme number for Do not try to close the appliance door approximately 3 seconds and then the within 2 minutes after AirDry programme duration. automatically opens it as this may 4. Close the appliance door to start the cause damage to the appliance. -
Page 14: Before Starting A Programme
– Use the recommended dosage of the 5. Adjust the released quantity of rinse aid. detergent and rinse aid. LOADING THE BASKETS – Make sure that the current level of the water softener agrees with the hardness of the • Always use the whole space of the baskets. -
Page 15: Care And Cleaning
CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 4. Wash the filters. CLEANING THE FILTERS The filter system is made of 3 parts. -
Page 16: Cleaning The Lower Spray Arm
3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of EXTERNAL CLEANING the filters can cause bad washing results and damage to the appliance. • Clean the appliance with a moist soft cloth. • Only use neutral detergents. •... -
Page 17: Troubleshooting
TROUBLESHOOTING Refer to the below table for information on possible WARNING! Improper repair of the problems. appliance may pose a danger to the With some problems, the display shows an alarm safety of the user. Any repairs must be code. performed by qualified personnel. - Page 18 Problem and alarm code Possible cause and solution Technical malfunction of the • Switch the appliance off and on. appliance. The display shows iC0 or iC3. The level of water inside the • Switch the appliance off and on. appliance is too high. •...
-
Page 19: The Washing And Drying Results Are Not Satisfactory
THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Clean- ing". -
Page 20: Technical Information
Problem Possible cause and solution Limescale deposits on the table- • The level of salt is low, check the refill indicator. ware, on the tub and on the in- • The cap of the salt container is loose. side of the door. •... -
Page 21: Environmental Concerns
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Recycle materials with the symbol . Put the Return the product to your local recycling facility or packaging in relevant containers to recycle it. Help contact your municipal office. protect the environment and human health by recycling waste of electrical and electronic appliances. - Page 24 WWW.ZANUSSI.COM/SHOP...