Electrical connection the water flow until it is clean. Warning! Risk of fire and electrical shock. • The first time you use the appliance, make sure that there is no leakage. • The appliance must be earthed. www.zanussi.com...
• Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. Product description Worktop Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com...
65º A30’ On/off indicator Delay button Programme marker Start button Indicators Programme knob Indicators Description End indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme oper- ates. www.zanussi.com...
Start a programme to remove them. Contact your local water authority to know Do not use detergent and do not load the the water hardness in your area. baskets. 2. Fill the salt container. 3. Fill the rinse aid dispenser. www.zanussi.com...
Page 6
Risk of corrosion. To off indicator. prevent it, after you fill the salt container, start a 2. Press and hold the start button. At the same programme. time turn the programme knob clockwise www.zanussi.com...
“Set- 3. Load the baskets. ting and starting a programme”. Set the cor- 4. Add the detergent. rect programme for the type of load and the 5. Start the programme. degree of soil. www.zanussi.com...
If the on/off indicator short programmes and detergent residues and the start indicator come on, the appliance can stay on the dishes. is not in setting mode. We recommend that you use detergent tablets with long programmes. www.zanussi.com...
Care and cleaning Cleaning the filters Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if necessary, clean them. www.zanussi.com...
• Only use salt, rinse aid and detergent for ises these minerals. dishwasher. Other products can cause dam- The dishwasher salt keeps the water softener age to the appliance. clean and in good conditions. It is important to set the right level of the water softener. This www.zanussi.com...
• The start indicator flashes continuously. The appliance does not drain the water. • The end indicator flashes 2 times intermittently. • The start indicator flashes continuously. The anti-flood device is on. • The end indicator flashes 3 times intermittently. www.zanussi.com...
Adjust the rinse aid selector to a lower sible causes. position. • The quantity of detergent is too much. Technical information Dimensions Width / Height / Depth (mm) 446 / 850 / 605 Electrical connection Refer to the rating plate. Voltage 220-240 V www.zanussi.com...
By ensuring this product where you purchased the product. is disposed of correctly, you will help prevent potential negative consequences for the • Discard correctly the packaging material. Re- cycle the materials with the symbol www.zanussi.com...