Table of Contents
Advertisement
Materials and Tools You Supply
Figure 19: Strap Tool Kit Contents
Item
1
2
Materials and Tools You Supply
• 1/2-inch (13-mm) socket wrench
• #2 Phillips head screwdriver
Mounting Instructions
This section includes all the procedures required to mount the router on any supported pole type.
This section covers the following procedures.
Install the Mounting Plate onto a Pole
This section describes three different procedures for installing the mounting plate on a pole. Follow the
instructions for the pole type used in your installation.
The instructions in these section refer to the mounting plate features shown in the following table.
Cisco Catalyst IR8140 Heavy Duty Series Router Hardware Installation Guide
30
Description
Strap tool
Strap tool documentation (not shown)
Mounting the Router
Advertisement
Table of Contents
