Using Network Diagnostic Tools - Cisco RV180 Administration Manual
Vpn router/wireless-n multifunction router
Hide thumbs
Also See for RV180:
- Administrator's manual (183 pages) ,
- Manual (14 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Administering Your Cisco RV180/RV180W
Using Network Diagnostic Tools
STEP 1
STEP 2
STEP 3
STEP 4
Using Network Diagnostic Tools
STEP 1
STEP 2
STEP 3
Cisco RV180/RV180W Administration Guide
To configure what the Cisco RV180/RV180W does when the traffic limit is
reached:
Choose Administration > WAN Traffic Meter.
Under When Limit Is Reached, select one of the following:
•
Block All Traffic—All traffic to and from the Cisco RV180/RV180W is
blocked.
•
Block All Traffic Except E-Mail—Only email is allowed to and from the
Cisco RV180/RV180W.
(Optional) Check the box to send an email alert when the traffic limit has been
reached and traffic is being blocked.
Click Save.
To view traffic statistics, choose Administration > WAN Traffic Meter. Under WAN
(Internet) Traffic Statistics, information is displayed about WAN traffic to and from
the Cisco RV180/RV180W.
Using PING
PING can be used to test connectivity between this router and another device on
the network connected to this router. To use PING:
Choose Diagnostics > Network Tools.
Under Ping or Trace an IP Address, enter an IP address or domain name and click
Ping. A popup window appears, indicating the ICMP echo request status.
(Optional) Check the box if you want to allow PING traffic to pass through VPN
tunnels.
7
144
- Quick Links:
- Product Overview
- Lan Ethernet Interfaces
Hide quick links:
Advertisement
Table of Contents
