Table of Contents
Advertisement
Periodic maintenance and adjustment
1. Parking brake pad wear limit
Parking brake pad wear limit:
1.2 mm (0.047 in)
3.
Install the right side cover and the
shroud, or close the shroud.
To adjust the parking brake
As the parking brake pads wear, adjustment
may be necessary to ensure proper brake
performance.
1.
Remove the shroud and the right side
cover [RST1NTF / RST1NTFY (see page
59 for the procedures)], or open the
shroud [RST9N (see page 61 for the pro-
cedures)].
2.
Loosen the parking brake pad adjusting
bolt locknut and the parking brake pad
adjusting bolt.
3.
Loosen the parking brake cable locknut.
4.
Turn the parking brake cable adjusting
bolt in or out to adjust the cable length.
84
1
2
1. Parking brake pad adjusting bolt locknut
2. Parking brake pad adjusting bolt
3. Parking brake cable locknut
4. Parking brake cable adjusting bolt
5. Parking brake cable length
Parking brake cable length:
43.0–46.5 mm (1.693–1.831 in)
(RST1NTF, RST1NTFY)
43.5–46.5 mm (1.713–1.831 in)
(RST9N)
5.
Tighten the parking brake cable locknut.
6.
Turn the parking brake pad adjusting bolt
in or out to adjust the clearance between
the parking brake pads and the brake
disc.
1. Parking brake pad
2. Brake disc
3. Parking brake pad adjusting bolt
4. Parking brake pad adjusting bolt locknut
Parking brake pad to brake disc clear-
ance (a) + (b):
1.5–2.0 mm (0.059–0.079 in)
5
4
3
4
3
Hide quick links:
Advertisement
Table of Contents
