Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDLN6621
Summary of Contents for Zanussi ZDLN6621
- Page 1 User Manual GETTING STARTED? EASY. ZDLN6621 EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shoot- er, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by the •... -
Page 4: Water Connection
cable need to be replaced, this must be carried • Dishwasher detergents are dangerous. Follow out by our Authorised Service Centre. the safety instructions on the detergent • Connect the mains plug to the mains socket packaging. only at the end of the installation. Make sure that •... -
Page 5: Product Description
PRODUCT DESCRIPTION The graphics below is just a general product overview. For more detailed information, refer to other chapters and/or documents provided with the appliance. Ceiling spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate... -
Page 6: Control Panel
CONTROL PANEL On/Off button/Reset button Option buttons Delay start button AUTO programme button Display Programme buttons DISPLAY A. Indicators B. Time indicator INDICATORS Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". -
Page 7: Programme Selection
PROGRAMME SELECTION PROGRAMMES OPTIONS You can adjust the programme selection to your needs by activating options. Extra Power This option improves the washing results of the selected programme. It increases the wash temperature and duration. Glass Care This option provides special care for a delicate A. - Page 8 Programme Type of load Degree of soil Programme phases Options 90 min • Crockery • Normal • Wash 60 °C • Extra Power • Cutlery • Lightly • Intermediate rinse • Glass Care • Pots dried-on • Final rinse 55 °C •...
-
Page 9: Basic Settings
Water (l) Energy (kWh) Duration (min) Programme Machine Care 8.9 - 10.9 0.60 - 0.72 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) In accordance with the 1016/2010 regulation 3) In accordance with the 2019/2022 regulation Information for test institutes... -
Page 10: The Water Softener
The order of the basic settings presented in the The water softener should be adjusted according to table is also the order of the settings in setting the hardness of the water in your area. Your local mode. water authority can advise you on the hardness of the water in your area. -
Page 11: The Rinse Aid Empty Notification
END SOUND You can activate an acoustic signal that sounds Water softener level Amount of water (l) when the programme is completed. Acoustic signals sound also when a malfunction of the appliance occurs. It is not possible to deactivate these signals. -
Page 12: Setting Mode
A. Previous button selected automatically after you activate the B. OK button appliance. C. Next button When the latest programme selection is disabled, Use Previous and Next to switch between the the default programme is ECO. basic settings and to change their value. SETTING MODE Use OK to enter the selected setting and to confirm changing its value. -
Page 13: How To Fill The Rinse Aid Dispenser
HOW TO FILL THE RINSE AID DISPENSER 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. - Page 14 HOW TO SELECT AND START THE 3. If the programme has a prewash phase, put a PROGRAMME AUTO small quantity of detergent on the inner part of the appliance door. 1. Press AUTO. 4. Close the lid. Make sure that the release button •...
-
Page 15: End Of The Programme
• When the programme is completed. If the door is opened for more than 30 • After 5 minutes if a programme was not started. seconds during the drying phase, the running programme ends. It does not END OF THE PROGRAMME happen if the door is opened by AirDry When the programme is complete, the display function. -
Page 16: Care And Cleaning
3. Start the 30 min programme. Do not add • Do not wash in the appliance items made of detergent and do not put dishes in the baskets. wood, horn, aluminium, pewter and copper as 4. When the programme is completed, adjust the they could crack, warp, get discoloured or water softener according to the water hardness pitted. -
Page 17: External Cleaning
• For optimal cleaning results, start the Machine Care programme. REMOVAL OF FOREIGN OBJECTS Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump. - Page 18 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. CLEANING THE LOWER SPRAY ARM We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
-
Page 19: Troubleshooting
2. Move the upper basket to the lowest level to 5. To install the spray arm (C) back, insert the reach the spray arm more easily. mounting element (B) in the spray arm and fix it 3. To detach the spray arm (C) from the delivery in the delivery tube (A) by turning it clockwise. - Page 20 Problem and alarm code Possible cause and solution The appliance does not fill with • Make sure that the water tap is open. water. • Make sure that the pressure of the water supply is not too low. The display shows i10 or i11. For this information, contact your local water authority.
-
Page 21: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The appliance door is difficult • The appliance is not levelled. Loosen or tighten the adjustable to close. feet (if applicable). • Parts of the tableware are protruding from the baskets. Rattling or knocking sounds •... - Page 22 Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Activate AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not suffi- cient.
-
Page 23: Technical Information
Problem Possible cause and solution Limescale deposits on the table- • The level of salt is low, check the refill indicator. ware, on the tub and on the in- • The cap of the salt container is loose. side of the door. •... -
Page 24: Environmental Concerns
and the model name and product number that you For more detailed information about the energy can find on the rating plate of the appliance. Refer label, visit www.theenergylabel.eu. to the chapter "Product description". ENVIRONMENTAL CONCERNS with the symbol with the household waste. Recycle materials with the symbol . - Page 28 WWW.ZANUSSI.COM/SHOP...