Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDLN2621
Summary of Contents for Zanussi ZDLN2621
- Page 1 User Manual GETTING STARTED? EASY. ZDLN2621 EN User Manual Dishwasher...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: Safety Instructions
Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be • between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by the •... -
Page 4: Water Connection
• Make sure not to cause damage to the mains • Do not remove the dishes from the appliance plug and to the mains cable. Should the mains until the programme is complete. Some cable need to be replaced, this must be carried detergent may remain on the dishes. -
Page 5: Product Description
PRODUCT DESCRIPTION Ceiling spray arm Lower basket Upper spray arm Upper basket Lower spray arm Cutlery drawer Filters The graphic is a general overview. For Rating plate more details, refer to other chapters or documents provided with the Salt container appliance. -
Page 6: Programme Selection
Extra Power button AUTO programme button INDICATORS Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use". - Page 7 PROGRAMMES OVERVIEW Dishwasher Programme Degree of soil Programme phases Options load 30 min Crockery, cut- Fresh • Dishwashing 50 °C • Extra Power lery • Intermediate rinse • Final rinse 45 °C • AirDry Pre-rinse • Prewash Not applicable 90 min Crockery, cut- Normal, lightly •...
-
Page 8: Basic Settings
Information for test institutes For any other questions regarding your dishwasher, To receive the necessary information for conducting refer to the service book provided with your performance tests (e.g. according to: BS appliance. EN60436 ), send an email to: info.test@dishwasher-production.com In your request, include the product number code (PNC) from the rating plate. -
Page 9: The Water Softener
2. Press OK to enter the setting. • The indicator related to the setting is on. • The other indicators are off. • The light related to indicates the current setting value. 3. Press Previous or Next to change the value. 4. -
Page 10: The Rinse Aid Empty Notification
German degrees French degrees Clarke de- mmol/l Water softener level (°dH) (°fH) grees <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. Regardless of the type of detergent used, set Subsequently, the rinsing of the water softener that the proper water hardness level to keep the lasts 5 minutes may begin in the same cycle or at salt refill indicator active. -
Page 11: Key Tones
AirDry is automatically activated with all Acoustic signals sound also when a programmes other than Pre-rinse. malfunction of the appliance occurs. It The duration of the drying phase and the door is not possible to deactivate these opening time vary depending on the selected signals. -
Page 12: How To Fill The Rinse Aid Dispenser
CAUTION! The compartment (A) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid 6. Turn the cap of the salt container clockwise to (C). - Page 13 3. If the programme has a prewash phase, put a HOW TO SELECT AND START THE small quantity of detergent on the inner part of PROGRAMME AUTO the appliance door. 1. Press AUTO. 4. Close the lid. Make sure that the release button The light related to the button is on.
-
Page 14: End Of The Programme
THE AUTO OFF FUNCTION END OF THE PROGRAMME This function saves energy by switching the When the programme is complete, the Auto Off appliance off when it is not operating. function switches the appliance off automatically. The function comes into operation automatically: All buttons are inactive except for the on/off button. -
Page 15: Care And Cleaning
BEFORE STARTING A PROGRAMME • Do not wash in the appliance items that can absorb water (sponges, household cloths). Before you start the selected programme, make • Put hollow items (cups, glasses and pans) with sure that: the opening facing downwards. •... -
Page 16: External Cleaning
REMOVAL OF FOREIGN OBJECTS Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump. CAUTION! If unable to remove the foreign objects, contact an Authorised 2. -
Page 17: Cleaning The Lower Spray Arm
8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. CLEANING THE LOWER SPRAY ARM We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. -
Page 18: Troubleshooting
3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. - Page 19 Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
- Page 20 Problem and alarm code Possible cause and solution Technical malfunction of the • Switch the appliance off and on. appliance. • The lights related to the programme buttons flash 12 times intermittently. • An acoustic signal sounds intermittently. The level of water inside the •...
- Page 21 THE DISHWASHING AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket load- ing leaflet. • Use more intensive washing programme. • Activate the Extra Power option to improve the washing re- sults of a selected programme.
-
Page 22: Technical Information
Problem Possible cause and solution Limescale deposits on the table- • The level of salt is low, check the refill indicator. ware, on the tub and on the in- • The cap of the salt container is loose. side of the door. •... - Page 23 with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
- Page 24 WWW.ZANUSSI.COM/SHOP...