Table of Contents
Advertisement
WHAT TO DO IF...
Problem
There is no spark when you try
to activate the spark generator.
The flame extinguishes immedi-
ately after ignition.
The flame ring is uneven.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Make
sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not
be free of charge, also during the warranty period.
A
MOD.
PROD.NO.
SER.NO
DATA
A. Stick it on Guarantee Card and send this part
(if applicable).
12
Possible cause
The hob is not connected to an
electrical supply or it is con-
nected incorrectly.
The fuse is blown.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated up
sufficiently.
Burner crown is blocked with
food residues.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
The instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
LABELS SUPPLIED WITH THE ACCESSORIES
BAG
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
SER.NO.
0049
B. Stick it on Guarantee Card and keep this part
(if applicable).
Remedy
Check if the hob is correctly
connected to the electrical
supply.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Place the burner cap and
crown correctly.
After lightning the flame, keep
the knob pushed for equal or
less than 10 seconds.
Make sure that the injector is
not blocked and the burner
crown is clean.
TYPE
IP20
Advertisement
Table of Contents
