Table of Contents
Advertisement
Figure 30. Configurator GUI (Ping Softdog dialog)
2.
To set up a constant ping to one or more IP addresses, do the
following steps:
1. Enter the IP address in the field to the left of the Add IP
2. Click the Add IP button.
3. To delete an IP address from the IP list, click the red
3.
To automatically reboot the unit if connectivity is lost between the
unit and any IP address, do the following steps:
1. Check the Reboot: check-box.
2. Click the Save button.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
button.
• The IP Address will be added to the IP list.
• There is no limit on the number of IP addresses
that can be entered.
cross to the right of the IP address listing.
Page 84 of 189
Advertisement
Table of Contents
