Table of Contents
Advertisement
Connecting
5.5 Sensor Installation
10.Sensors can now be mounted. Refer to Sensor Installation mounting procedures and
select the mounting mode desired.
11.After sensors are mounted scroll to [Install Complete] and select [Install].
5.5.3
Reflect Mount
Reflect Mount - Sensor Installation using Mounting Frames and Spacer Bar
1. After receiving the spacing index from the Installation Menu, prepare the pipe surface
area where the sensors will be mounted.
2. Degrease the surface and remove any grit, corrosion, rust, loose paint, etc.
Before beginning refer to the Reflect Mount Installation diagram example below.
①
②
③
④
Figure 5-12
Note
Minimum Ltn 18 mm (0.75 in).
62
Optional: On larger pipes, multiple lengths
of straps can be linked together to sur-
round pipe
Mounting Strap positioned around Mount-
ing Frame
Sensor shown in the 9 o'clock position on
pipe
Mounting Frame
Reflect Mount with Mounting Frames and Spacer Bar
⑤
Space Bar Platform & Clamping Screw
⑥
Space Bar (Front View)
⑦
Metal Post
⑧
Mounting Strap Adjusting Screw
Operating Instructions, 12/2014, A5E03086491-AC
FUE1010 IP65 NEMA 4X
Advertisement
Table of Contents
