What To Do Next; Copying A Configuration File From The Device To An Rcp Server - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
What to Do Next
Write file tokyo-confg on host 172.16.2.155? [confirm] Y
Writing tokyo-confg!!! [OK]
What to Do Next
After you have issued the copy command, you may be prompted for additional information or for confirmation
of the action. The prompt displayed depends on how much information you provide in the copy command
and the current setting of the file prompt global configuration command.
Copying a Configuration File from the Device to an RCP Server
To copy a startup configuration file or a running configuration file from the device to an RCP server, use the
following commands beginning in privileged EXEC mode:
SUMMARY STEPS
1. enable
2. configure terminal
3. ip rcmd remote-username username
4. end
5. Do one of the following:
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip rcmd remote-username username
Example:
Device(config)# ip rcmd remote-username NetAdmin1
Step 4
end
Example:
Device(config)# end
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
190
• copy system:running-config rcp: [[[//[username@]location ]/directory ]/filename ]
• copy nvram:startup-config rcp: [[[//[username@]location ]/directory ]/filename ]
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
(Optional) Changes the default remote username.
(Optional) Exits global configuration mode.
Managing Configuration Files
Hide quick links:
Advertisement
Table of Contents
