Table of Contents
Advertisement
6
Press
to select
To return to
, press
The machine is now set for programmed
thread-cutting.
7
Press
(OK key).
The initial stitch screen appears again, and
appears in the lower-left corner of the
screen.
• When the sewing machine is turned off, the
programmed thread-cutting setting is
cancelled.
8
Position the fabric under the presser foot, and
then press
(start/stop button) once.
1
1 Start/stop button
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
9
After reaching the end of the stitching, press
(reverse/reinforcement stitch button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
.
.
After reverse/reinforcement stitches are
sewn, the sewing machine stops and cuts
the thread.
The thread is cut here.
Memo
● Reverse/reinforcement stitches will not be
sewn and the thread will not automatically
be cut if the start/stop button is pressed at
the end of the stitching. Be sure to press the
reverse/reinforcement stitch button at the
end of the stitching.
Useful Functions
59
Hide quick links:
Advertisement
Table of Contents
