Remove The Phone From The Non-Lockable Wall Mount - Cisco 8800 Series Manual

Hide thumbs Also See for 8800 Series:

Table of Contents

Remove the Phone from the Non-Lockable Wall Mount

Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into

Remove the Phone from the Non-Lockable Wall Mount

The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs.

Figure 15: Tab Location

Before you begin

Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths

Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth

of about 3/4 of an inch or 2 centimeters.

Press firmly inwards to disengage the tabs.

Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later

Adjust the Handset Rest, on page

Cisco IP Phone Accessories

Show Quick Links

Table of Contents

8851 8861 8865