Configure Priorities For Voice And Video Data - Cisco 8800 Series Manual
Hide thumbs
Also See for 8800 Series:
- Administration manual (406 pages) ,
- User manual (218 pages) ,
- Hardware installation manual (140 pages)
Table of Contents
Advertisement
Configure Priorities for Voice and Video Data
Parameters
Exec_Assistant_Key_List
Configure Priorities for Voice and Video Data
You can prioritize voice or video data in limited bandwidth conditions.
You will need to configure the priorities individually on each line of a phone.
You can configure different priorities for different areas of traffic. For example, you can configure different
priorities for internal and external traffic by setting up different configurations on internal and external lines.
For effective traffic management, specify the same settings on all the phone lines in a group.
The Type of Service (ToS) field of a data packet determines the packet's priority in data traffic. You can
configure the desired priorities by specifying appropriate values for the ToS fields of voice and video packets,
for each phone line.
For voice data, the phone applies the ToS value that it receives by LLDP. When there is no ToS value available
by LLDP, the phone applies the value that you specify for voice packets.
For video data, the phone always applies the ToS value that you specify for video packets.
The default values prioritize voice over video.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the
Data, on page 215
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext(n), where n is an extension number.
Step 2
In the Network Settings section, set the parameter values as described in
for Voice and Video Data, on page
Step 3
Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
214
Value
divert
table.
215.
Description
Enables assistants to activate or
deactivate call diversion, from the
Settings > Executive menu
Parameters for Configure Priorities for Voice and Video
Access the Phone Web Interface, on page
Parameters for Configure Priorities
Cisco IP Phone Configuration
104.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
