Cisco 8800 Series Manual page 135

Hide thumbs Also See for 8800 Series:

Table of Contents

Cisco IP Phone Configuration

Upload Delay

Defines the interval (in seconds) that the phone reports its configuration to the provisioning

This field is used only when Report to Server is set to Periodically.

Perform one of the following:

• In the phone configuration file with XML(cfg.xml), enter a string in this format:

<periodic_upload_to_server ua="na">3600</periodic_upload_to_server>

• In the phone web interface, specify the interval in seconds.

Allowed values: An integer ranging between 600 and 259200

Default: 3600

Defines the delay (in seconds) that the phone waits after a change is made, and then reports

the configuration.

This field is used only when Report to Server is set to On Local Change.

Perform one of the following:

• In the phone configuration file with XML(cfg.xml), enter a string in this format:

<Upload_Delay_On_Local_Change ua="na">60</Upload_Delay_On_Local_Change>

• In the phone web interface, specify the delay in seconds.

Allowed values: An integer ranging between 10 and 900

Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later

Parameters for Reporting the Phone Configuration to the Server

Show Quick Links

Table of Contents

Troubleshooting

8851 8861 8865