Cisco 8800 Series Manual page 134
Hide thumbs
Also See for 8800 Series:
- Administration manual (406 pages) ,
- User manual (218 pages) ,
- Hardware installation manual (140 pages)
Table of Contents
Advertisement
Parameters for Reporting the Phone Configuration to the Server
Field
HTTP Report
method:
Report to
Server:
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
114
Description
Specifies whether the HTTP Request that the phone sends should be an PUT or an POST.
• PUT–To create a new report or overwrite an existing report at a known location on
the server. For example, you may want to keep overwriting each report that you send
and only store the most current configuration on the server.
• POST–To send the report data to the server for processing, such as, by a PHP script.
This approach provides more flexibility for storing the configuration information. For
example, you may want to send a series of phone status reports and store all the reports
on the server.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<HTTP_Report_Method ua="na">PUT</HTTP_Report_Method>
• In the phone web interface, select an HTTP report method.
Allowed values: PUT|POST
Default: POST
Defines when the phone reports its configuration to the provisioning servers.
• On Request: The phone reports its configuration only when an administrator sends
a sip notify event, or the phone restarts.
• On Local Change: The phone reports its configuration when any configuration
parameter changes by an action on the phone or on the phone administration web
page. The phone waits for a few seconds after a change is made, and then reports the
configuration. This delay ensures that changes are reported to the web server in batches,
rather than reporting a single change at a time.
• Periodically: The phone reports its configuration at regular intervals. The interval is
expressed in seconds.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Report_to_Server ua="na">Periodically</Report_to_Server>
• In the phone web interface, select an option from the list.
Allowed values: On Request|On Local Change|Periodically
Default: On Request
Cisco IP Phone Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
