Chapter 2
Mounting Instructions
Mounting the Access Point
Step 3
For pole diameters of 3.5 in. (8.9 cm) or less, mount the pole clamp bracket assembly to a pole using two
metal straps looped through the space between the pole clamp bracket and the strap brackets (see
Figure
2-12) to provide maximum holding strength for extreme environments. Following the instructions
provided with the hand strap tool (AIR-BAND-INST-TL=), loop each metal strap twice.
Figure 2-12
Metal Strap Open Space for 3.5 in. (8.9 cm) and Smaller Poles
1
Metal strap open space
Caution
Do not place the metal straps in the large open area between the pole clamp bracket and the strap
brackets, because this does not properly secure the access point.
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
2-26
OL-12632-02