Cisco Aironet 1520 Series Hardware Installation Manual page 34

Hide thumbs Also See for Aironet 1520 Series:

Table of Contents

Mounting the Access Point

To mount the access point on a vertical wall, follow these instructions:

Step 1

Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See

Figure 2-6

mounting holes or the mounting slots.

The mounting surface, attaching screws, and optional wall anchors must be able to support a 50 lbs (22.7

Caution

kg) static weight.

Figure 2-6

Access point quick mount notch

Mounting holes

Step 2

Use four customer-supplied screws and optional screw anchors to attach the mounting plate to the

mounting surface.

Note

Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide

2-18

for the mounting bracket screw hole locations. You can optionally use the individual

Mounting Bracket for Wall Mounting

If necessary, use suitable screw anchors and an exterior-grade plywood backboard to mount the

access point to stucco, cement, or drywall.

Chapter 2

Mounting slots (allows bracket rotation)

Mounting Instructions

OL-12632-02

Table of Contents

Show Quick Links

Table of Contents

Lap1522