Safety Precautions - Cisco Aironet 1520 Series Hardware Installation Manual
Hide thumbs
Also See for Aironet 1520 Series:
- Mounting instructions (70 pages) ,
- Hardware installation manual (50 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Chapter 2
Mounting Instructions
Safety Precautions
In order to comply with radio frequency (RF) exposure limits, the antennas for this product should be
Warning
positioned no less than 6.56 ft (2 m) from your body or nearby persons. Statement 339
The AC power supply has double pole/neutral fusing. Statement 188
Warning
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Class 1 laser product. Statement 1008
Warning
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions. Statement 1015
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1022
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023
Warning
This unit might have more than one power supply connection. All connections must be removed to
Warning
de-energize the unit. Statement 1028
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)
requirements in IEC 60950 based safety standards. Statement 1033
Warning
When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046.
OL-12632-02
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Safety Information
2-5
Hide quick links:
Advertisement
Table of Contents
