Unpacking the Access Point
Unpacking the Access Point
When you are unpacking the access point, do not remove the foam blocks attached to the antenna
connectors. The foam protects the antenna connectors during installation.
Follow these steps to unpack the access point:
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container, and save it.
Step 3
Ensure that all items listed in
missing, notify your authorized Cisco sales representative.
Package Contents
Each access point package contains the following items:
•
•
•
•
•
•
Tools and Materials that You Supply
•
•
•
•
•
•
•
•
•
•
•
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
2-2
Package Contents
Access point
Cisco product documentation and translated safety warnings
Grounding lug with two screws and lock washers
Three liquid tight adapters
Two-pin DC power connector
Ground lug (Panduit PLCD6-10A-L) and screws with lock washers
Ground lug crimping tool (Panduit CT-720 with CD-720-1 die)
6-AWG copper ground wire
13 mm box-end wrench or socket set
Adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench
Small flat screwdriver for DC power connector
Optional power injector (AIR-PWRINJ1500-2=)
Optional AC power cord
40-ft (12.2-m) power cord (AIR-CORD-R3P-40NA=) for light pole installations in the US and
–
Canada
–
4-ft (1.2-m) streetlight power tap adapter (AIR-PWR-ST-LT-R3P=) for light pole installations
in the US and Canada
Antennas, 2.4 and 5 GHz (refer to the
Optional pole mount kit (AIR-ACCPMK1520=)
Optional strand mount kit (AIR-ACCSMK1520=)
Optional strap hand tool (AIR-BAND-INST-TL=)
are included in the shipment. If any item is damaged or
"External Antennas" section on page
Chapter 2
Mounting Instructions
1-7)
OL-12632-02